RM1C60D100 – SSR PS 600V 100A 4.25-32VDC

Why Choose the Carlo Gavazzi RM1C60D100 Solid State Relay?

The Carlo Gavazzi RM1C60D100 is a robust single-pole solid state relay (SSR) designed for reliable switching of AC loads in industrial automation, heating, transformer and control applications. As part of the established Carlo Gavazzi RM1C solid state relay series, it uses peak switching technology and a compact panel-mount design for dependable semiconductor switching in demanding industrial environments.

This solid state relay is particularly suited to switching transformers and other highly inductive loads. Peak switching activates the output semiconductor at the peak of the AC line voltage, while the output switches off when the load current crosses zero after the control voltage is removed. The design uses thyristor power units, direct copper bonding technology and optical isolation for reliable industrial operation.

With a rated operational current of 100 A AC-51, an operating voltage range of 340–660 V AC and a 4.25–32 V DC control input, the RM1C60D100 is well suited to high-current industrial switching applications. Its panel-mount construction and screw terminals with captive clamp allow straightforward integration into electrical control panels when used with an appropriately selected heatsink.

Key Advantages

• High-current single-pole solid state relay designed for industrial AC switching.
• 100 A AC-51 rated current for suitable loads with appropriate thermal management.
• 340–660 V AC operating voltage for high-voltage industrial applications.
• 4.25–32 V DC control input suitable for PLCs and electronic control systems.
• Peak switching is particularly suitable for transformers and highly inductive loads.
• 1400 Vp blocking voltage provides high output voltage withstand capability.
• Optical isolation provides electrical separation between the control and load circuits.
• Panel-mount construction enables straightforward installation with a suitable heatsink.

Key Features

• Carlo Gavazzi RM1C series solid state relay.
• Single-pole AC solid state switching.
• 100 A rated current at AC-51.
• 340–660 V AC operating voltage.
• 4.25–32 V DC control voltage.
• Peak switching mode.
• 1400 Vp blocking voltage.
• Thyristor power semiconductor technology.
• Optical isolation rated at 4000 V AC.
• LED indication for output activation.
• Screw power connections with captive clamp.
• Clip-on IP20 protection cover available as an accessory.

Reliable Solid State Switching for Industrial Control

Solid state relays such as the Carlo Gavazzi RM1C60D100 use semiconductor technology instead of mechanical contacts to switch electrical loads. This provides silent operation, rapid electronic control and eliminates mechanical contact wear, making SSRs particularly useful where frequent or dependable switching is required.

The RM1C series uses peak switching technology that is especially suited to transformer and other highly inductive loads. The semiconductor is activated at the peak of the AC line voltage and switches off when the load current crosses zero after the control signal is removed. This operating principle helps provide controlled switching for demanding industrial loads.

Typical Applications

• Transformer switching and control.
• Industrial heating and temperature control systems.
• High-current industrial automation equipment.
• Industrial process control systems.
• PLC-controlled AC load switching.
• Electrical control panels and industrial machinery.
• Switching of suitable highly inductive AC loads.