RGC3P60I65C16DFM – 3P -SSC I IN – 16FC 600V 3X65A 1200VP-MNTR

Why Choose the Carlo Gavazzi RGC3P60I65C16DFM Solid State Contactor?

The Carlo Gavazzi RGC3P60I65C16DFM is a robust three-phase solid state contactor (SSR) designed for proportional control of three-phase AC loads in industrial automation, heating systems, machinery and process-control applications. As part of the advanced Carlo Gavazzi RGC3P series, it combines analogue current control with 16-cycle distributed full-cycle switching, integrated monitoring, built-in overvoltage protection and active fan cooling.

This solid state contactor provides electronic switching without mechanical contacts, enabling silent operation, rapid response and reduced mechanical wear. The C16 switching mode provides distributed full-cycle proportional control, while integrated monitoring supports detection of mains loss, load loss on any phase and over-temperature conditions. The integrated fan and heatsink provide additional thermal management for the 65 A switching capacity.

With a rated operational current of 65 A, an operating voltage range of 180–660 V AC and analogue 0–20 mA, 4–20 mA or 12–20 mA DC control, the RGC3P60I65C16DFM is suitable for proportional regulation of demanding three-phase industrial loads. An external 24 V AC/DC supply supports the control and monitoring electronics, while its three-pole DIN rail or panel mounting provides flexible installation within industrial control panels.

Key Advantages

• Three-phase solid state contactor designed for proportional AC load control.
• 65 A rated operational current for demanding industrial three-phase loads.
• 180–660 V AC operating voltage for high-voltage industrial applications.
• 0–20 mA, 4–20 mA and 12–20 mA DC analogue input for proportional control.
• 16-cycle distributed full-cycle switching provides controlled power regulation.
• Integrated mains-loss, load-loss and over-temperature monitoring improves system diagnostics.
• Integrated fan and heatsink support thermal management during higher-current operation.

Key Features

• Carlo Gavazzi RGC3P solid state contactor series.
• 65 A rated operational current at AC-51.
• 180–660 V AC operating voltage.
• 1200 V peak blocking voltage.
• 0–20 mA, 4–20 mA and 12–20 mA DC control input.
• 16-cycle distributed full-cycle proportional switching.
• Integrated load-loss detection on any phase.
• Integrated mains-loss detection.
• Integrated over-temperature detection.
• Built-in overvoltage protection.
• 24 V AC/DC external supply for control and monitoring electronics.
• Integrated fan cooling for the heatsink.
• Three-pole switching for three-phase loads.
• DIN rail or panel mounting.
• Box-clamp power connection.

Precise Proportional Control for Industrial Loads

Solid state contactors such as the Carlo Gavazzi RGC3P60I65C16DFM use semiconductor technology to regulate three-phase AC loads without mechanical contacts. This provides silent operation, rapid response and reduced mechanical wear compared with conventional electromechanical switching devices.

The C16 configuration is designed for proportional control using distributed groups of complete AC cycles. The analogue control signal determines the required output level, allowing the solid state contactor to regulate power supplied to the connected three-phase load. Integrated monitoring provides additional diagnostic capability by detecting mains loss, load loss on individual phases and over-temperature conditions. The integrated fan and heatsink support reliable thermal operation at the device's higher current rating.

Typical Applications

• Industrial heating and temperature-control systems.
• Three-phase electrical heating equipment.
• Plastic processing and thermal process machinery.
• Industrial ovens and process equipment.
• High-current industrial process-control applications.
• PLC and process-controller controlled three-phase loads.