HR802CA024 Lovato IND. RELAY ATEX 2C/O 30A 24VAC

Why Choose the Lovato HR802CA024 ATEX Industrial Power Relay?

The Lovato HR802CA024 is a high-capacity ATEX-certified industrial power relay designed for demanding control and switching applications, including equipment intended for appropriate potentially explosive atmospheres. It carries an ATEX classification of II 3 G Ex nC IIC Gc, making it particularly relevant to applications such as refrigeration systems using flammable refrigerants when incorporated into a suitably designed and compliant installation.

The HR802CA024 features 2 changeover (2C/O) contacts with a conventional free-air thermal current of 30 A on the normally open contacts and 3 A on the normally closed contacts. Its contacts use Ag/SnO2 material, while the 24 V AC 50/60 Hz coil consumes approximately 4 VA, providing robust electromechanical switching for industrial control applications.

Designed for demanding operating conditions, the HR802CA024 offers a mechanical life of up to 5,000,000 cycles and an AC-1 electrical life of up to 100,000 cycles. It can also control a single-phase motor up to 2.2 kW at 230 V AC, while its screw-fixing construction and broad operating-temperature capability make it a strong choice for refrigeration, HVAC, machinery and industrial equipment.

Key Advantages

• ATEX-certified industrial power relay with classification II 3 G Ex nC IIC Gc.
• 2 changeover contacts provide flexible control and power switching.
• High-capacity 30 A normally open contact rating.
• 3 A normally closed contact rating.
• 24 V AC 50/60 Hz coil for common industrial control systems.
• Suitable for single-phase motor control up to 2.2 kW at 230 V AC.
• Long mechanical life of up to 5 million operations.
• AC-1 electrical life of up to 100,000 operations.
• Designed for demanding industrial environments, including suitable refrigeration applications using flammable refrigerants.

Key Features

• Lovato Electric HR80 series.
• HR802C industrial power relay design.
• ATEX classification: II 3 G Ex nC IIC Gc.
• 2C/O changeover contact configuration.
• 30 A NO / 3 A NC conventional free-air thermal current at ≤40 °C.
• 24 V AC relay control voltage.
• 50/60 Hz coil frequency.
• Ag/SnO2 contact material.
• 50 mΩ contact impedance.
• Approximately 25 ms closing and opening times.
• 4 VA average AC coil consumption at 20 °C.
• Any normal operating position.
• Screw fixing.
• No integrated status indication or mechanical test actuator.

High-Power Relay Switching for Demanding Industrial Applications

Industrial power relays such as the Lovato HR802CA024 allow a control circuit to operate higher-current electrical loads through electrically operated contacts. The HR802C design combines 2 changeover contacts with a high 30 A NO conventional thermal current, allowing it to perform switching duties that exceed the capacity of many conventional miniature control relays.

The II 3 G Ex nC IIC Gc ATEX classification makes the HR802CA024 especially useful when designing appropriate equipment for potentially explosive gas atmospheres. Lovato identifies the HR80 ATEX range as particularly suitable for refrigeration systems using propane refrigerant, as well as industrial control equipment used in demanding environments. The complete installation must still be engineered and certified as required for its intended hazardous-area application.

Typical Applications

• Refrigeration systems using propane and other applicable flammable refrigerants.
• Industrial refrigeration and HVAC equipment.
• Equipment designed for appropriate potentially explosive gas atmospheres.
• Industrial control panels.
• Food-processing machinery and equipment.
• Chemical processing equipment.
• Single-phase motor control up to 2.2 kW at 230 V AC.
• High-current auxiliary switching.
• Industrial machinery using a 24 V AC control supply.