Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 99.01.8.230.07 is a 110–240 V AC plug-in residual current bypass module designed to help manage leakage currents and reduce unwanted relay coil energisation in compatible Finder relay socket assemblies.
£3.04
The Finder 99.01.8.230.07 is a specialist residual current bypass module designed for compatible Finder relay sockets and 110–240 V AC control circuits. Part of the Finder 99 Series, this compact plug-in accessory helps prevent unwanted relay operation caused by small leakage currents in electrical control systems.
Modern control circuits may contain electronic switches, solid-state outputs, long cable runs or other components that allow small residual currents to flow even when a control signal is nominally switched off. In certain relay installations, these currents can contribute to unwanted coil energisation or unreliable release. The Finder 99.01.8.230.07 provides a resistive bypass path to help manage these residual currents.
Unlike conventional relay accessories that provide LED indication or transient suppression, this particular module is designed specifically for residual current bypass. Its operating range of 110–240 V AC makes it suitable for appropriately rated mains-voltage relay control circuits where leakage current needs to be addressed.
The plug-in module design allows installation in compatible Finder sockets without requiring a separate external bypass resistor assembly. This helps simplify control panel construction, maintenance and troubleshooting when the module is correctly selected for the relay, socket and circuit.
In a conventional relay control circuit, the relay coil should become de-energised when its control signal is removed. However, electronic switches, semiconductor outputs and some wiring arrangements can allow small amounts of current to continue flowing in the off state. Depending on the relay coil characteristics, this residual current may create enough voltage to interfere with reliable release.
The Finder 99.01.8.230.07 is designed to help address this problem by providing a resistive bypass path across the appropriate control circuit connection. This allows a proportion of the leakage current to flow through the bypass module rather than contributing to an unwanted voltage across the relay coil.
The module is particularly relevant where a relay is controlled by an electronic output that has a specified off-state leakage current. In these applications, selecting a suitable bypass accessory can help achieve more predictable relay operation. The module must be matched to the circuit voltage, the relay coil characteristics and the amount of leakage current present.
As a Finder 99.01 plug-in accessory, the module is intended for compatible relay sockets with the appropriate accessory connection arrangement. The module is not interchangeable with every Finder 99 Series accessory format, and compatibility should be confirmed against the specific socket documentation before installation.
The Finder 99.01.8.230.07 should not be confused with an LED indication module, a flyback diode, a varistor or an RC suppression module. These accessories perform different electrical functions. Because a resistive bypass also draws current and dissipates power during operation, the complete control circuit must be assessed for electrical suitability and installed by a competent person.
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Mounting Type | Plug-in socket | |
| Manufacturer | Finder | |
| Series | 99 Series | |
| Module family | 99.01 | |
| Model | 99.01.8.230.07 | |
| Product type | Plug-in relay accessory module | |
| Primary function | Residual current bypass | |
| Circuit type | Resistive bypass module | |
| Operating voltage range | 110–240 V AC | |
| Supply type | AC | |
| Installation method | Plug-in connection to compatible relay socket | |
| Module housing colour | Blue | |
| Associated accessory series | Finder 99.01 | |
| Compatible socket families | Selected Finder 90, 94, 95 and 96 Series sockets designed to accept 99.01 modules | |
| Relay compatibility | Determined by the selected Finder socket and relay combination | |
| LED indication | Not provided by this module | |
| Primary transient suppression function | Not specified; this is a residual current bypass module | |
| Separate relay supplied | No | |
| Separate relay socket supplied | No | |
| Installation environment | Suitable electrical control enclosure | |
| Product classification | Relay accessory / pluggable function module |
The Finder 99.01.8.230.07 is a residual current bypass module used in compatible AC relay control circuits. It helps manage leakage currents that could otherwise contribute to unwanted relay coil voltage or unreliable release.
The module is designed for an operating voltage range of 110–240 V AC. It should only be used in compatible relay control circuits within its specified voltage range.
No. The Finder 99.01.8.230.07 is a residual current bypass module, not an LED indication module. Finder offers separate 99 Series accessories for visual coil indication.
A residual current bypass module provides a resistive current path that helps divert leakage current away from a relay coil. This can reduce unwanted coil voltage and help the relay release correctly when its control signal is switched off.
Yes, where the problem is caused by a suitable level of off-state leakage current. The module can help reduce residual coil voltage, but the relay, circuit characteristics and leakage current must be checked to confirm that it is an appropriate solution.
No. The specified operating range for this part number is 110–240 V AC. It should not be selected for a DC circuit unless the manufacturer explicitly confirms that application.
The module uses the Finder 99.01 accessory format and is intended for selected compatible Finder relay sockets. Compatibility depends on the exact socket and relay combination and should be checked against Finder's technical documentation.
No. The Finder 99.01.8.230.07 is a resistive residual current bypass module. An RC suppression module is designed primarily to help control electrical transients, so the two accessories serve different purposes.
No. The Finder 99.01.8.230.07 is a plug-in accessory module. The compatible relay and socket are separate components.
It may be suitable for compatible AC relay circuits controlled by electronic or PLC outputs where off-state leakage current causes a problem. The output type, leakage current, relay coil and module voltage rating must all be checked before use.
Yes. A resistive bypass module draws current when voltage is applied across it and therefore dissipates electrical power. The circuit design must account for this behaviour and comply with the manufacturer's application requirements.
Yes, provided the existing relay socket is compatible and the circuit conditions justify its use. The equipment must be safely isolated before the module is installed, removed or replaced.
The Finder 99.01.8.230.07 provides a compact, dedicated residual current bypass solution for compatible 110–240 V AC relay control circuits, helping engineers address leakage-current-related switching problems without installing a separate external bypass resistor assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.