Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 99.01.3.000.00 is a standard-polarity diode suppression module for compatible Finder relay sockets, designed to limit DC relay coil reverse-voltage transients across a 6–220 V DC operating range.
£1.81
The Finder 99.01.3.000.00 is a standard-polarity diode suppression module from the Finder 99 Series, designed to protect compatible DC relay coil circuits against reverse-voltage transients. Operating across a 6–220 V DC range, this plug-in accessory provides a practical method of suppressing the voltage spikes generated when an electromagnetic relay coil is switched off.
Designed for compatible Finder relay sockets, the module uses a recovery diode to provide a discharge path for the energy stored in the relay coil. This helps limit potentially damaging voltage peaks and reduces electrical disturbances in associated control circuitry.
The Finder 99.01.3.000.00 features standard DC polarity, with the positive supply connected to terminal A1. It is a diode-only protection module without an integrated LED indicator. Because diode suppression can increase relay release time by approximately a factor of three, it is particularly suitable for applications where effective coil transient suppression is more important than rapid relay release.
When a DC electromagnetic relay coil is energised, energy is stored in its magnetic field. When the coil supply is interrupted, this stored energy can generate a high reverse-voltage transient. Without suitable suppression, the transient may place additional electrical stress on the device switching the relay coil and contribute to electromagnetic interference.
The Finder 99.01.3.000.00 uses a recovery diode connected across the relay coil circuit. During normal energisation, the diode is reverse-biased. When the coil supply is removed, the diode provides a path for the coil current to circulate and decay, limiting the reverse-voltage peak.
This suppression method is particularly effective for DC coils, but it also affects the relay's switching dynamics. Finder identifies an approximate threefold increase in relay release time when using this type of diode module. Where fast contact release is important, a suitable varistor or RC suppression module may be preferable.
Correct polarity is essential. The positive DC supply must be connected to terminal A1 of the associated relay coil. Reversing the supply can forward-bias the suppression diode and create an unintended current path.
The module does not contain an LED indicator and does not perform the relay's switching function. It is intended solely for suppression of compatible DC relay coil transients and must be used with an appropriate Finder relay and socket combination.
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Mounting Type | Plug-in socket | |
| Manufacturer | Finder | |
| Series | 99 Series | |
| Product code | 99.01.3.000.00 | |
| Product family | 99.01 | |
| Product type | Relay coil protection module | |
| Module function | EMC suppression | |
| Suppression component | Recovery diode | |
| Polarity | Standard polarity | |
| Operating voltage range | 6–220 V DC | |
| Minimum operating voltage | 6 V DC | |
| Maximum operating voltage | 220 V DC | |
| Supported supply type | DC only | |
| Positive supply connection | Terminal A1 | |
| LED indication | Not included | |
| Protection principle | Suppression of relay coil reverse-voltage transients | |
| Effect on relay release time | Approximately three times the unsuppressed release time | |
| Mounting method | Plug-in installation in compatible Finder relay sockets | |
| Compatible socket examples | Finder 90.20, 90.21, 94.72, 94.73, 94.74, 94.82, 95.63, 95.65, 96.72 and 96.74 | |
| Accessory category | Relay Coil Suppression Modules |
The Finder 99.01.3.000.00 is a diode suppression module used to limit reverse-voltage transients generated when compatible DC relay coils are switched off.
The module is designed for compatible relay coil circuits operating between 6 V and 220 V DC.
No. The Finder 99.01.3.000.00 is a DC-only diode suppression module. A suitable varistor or RC module should be selected for compatible AC relay coil circuits.
No. This model is a diode-only suppression module and does not include LED indication.
The module uses standard DC polarity, requiring the positive supply to be connected to relay coil terminal A1.
The diode provides a path for the inductive coil current when the supply is removed, helping suppress the resulting reverse-voltage peak and reduce electrical stress on the switching circuit.
Yes. Finder indicates that this suppression method can increase the relay release time by approximately a factor of three compared with an unsuppressed coil.
A suitable varistor or RC module may be preferred where a significant increase in relay release time is undesirable. The correct suppression method depends on the coil supply and switching requirements.
Compatible socket examples include Finder 90.20, 90.21, 94.72, 94.73, 94.74, 94.82, 95.63, 95.65, 96.72 and 96.74. The exact socket and relay combination should be checked before installation.
No. It is a relay coil suppression accessory. A compatible relay and socket must be selected separately.
No. The module is designed to plug into a compatible Finder relay socket rather than mount independently onto a DIN rail.
Yes, provided the relay and socket are compatible. A 24 V DC coil supply falls within the module's specified 6–220 V DC operating range.
The 99.01.3.000.00 is a standard-polarity diode module, while the 99.01.2.000.00 is a non-standard-polarity diode module. The correct version must be selected according to the relay coil supply polarity.
The 99.01.3.000.00 is a DC-only diode suppression module without LED indication, whereas the 99.01.0.230.98 combines green LED indication with varistor suppression for compatible 110–240 V AC/DC applications.
No. The module is designed to suppress relay coil transients. Additional protection may be required for inductive loads connected to the relay contacts.
Yes. Its plug-in construction allows replacement in a compatible relay socket. The circuit must be safely isolated before removing or installing the module.
Finder 99 Series suppression modules provide practical solutions for controlling relay coil switching transients in industrial electrical installations. The Finder 99.01.3.000.00 combines a standard-polarity recovery diode, a 6–220 V DC operating range and convenient plug-in installation, making it a useful accessory for electrical panel builders, automation engineers, OEM equipment manufacturers and industrial maintenance teams working with compatible DC relay circuits.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.