Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 66.82.8.400.1300 is a Series 66 two-pole electromagnetic power relay with a 400 V AC coil voltage designation, reinforced coil-to-contact insulation, Faston 250 terminals and flange mounting for industrial electrical switching and automation control applications.
The Finder 66.82.8.400.1300 is an industrial electromagnetic power relay from the Finder Series 66 range, designed for switching substantial electrical loads in automation equipment, machinery and power control systems. Its 400 V AC coil voltage designation makes it relevant to control systems using higher-voltage AC supplies, while its two-pole switching design enables coordinated control of separate electrical circuits.
The Finder Series 66 is known for its robust electromechanical construction, high-current switching capability and reinforced insulation between the operating coil and power contacts. These characteristics make the range suitable for equipment manufacturers and electrical engineers seeking dependable switching components for industrial applications.
The 66.82 configuration features Faston 250 quick-connect terminals and a flange-mounted housing, providing a practical alternative to PCB-mounted relays. The Finder 66.82.8.400.1300 is intended for integration into suitable electrical assemblies where mechanical mounting, accessible wiring and reliable power switching are important. Exact coil operating limits and contact ratings for this ordering code should be checked against the manufacturer's product-specific documentation before installation.
The Finder 66.82.8.400.1300 operates using an electromagnetic coil that mechanically changes the state of its switching contacts. When the correct AC control voltage is applied to the coil, the relay operates its contact mechanism to control the connected electrical circuits. Removing the coil supply allows the non-latching mechanism to return the contacts to their normal positions.
Its two-pole construction is useful where two circuits need to be controlled by a common switching command. Electromechanical relays provide a practical interface between control systems and electrical loads, allowing equipment designers to separate control and power functions within a suitable electrical assembly.
The Finder Series 66 incorporates reinforced insulation and substantial separation between coil and contacts. These features support the use of the relay in industrial power control systems, provided that the specific contact ratings, switching duty and insulation requirements are appropriate for the installation.
The 66.82 flange-mounted format uses Faston quick-connect terminals rather than direct PCB solder connections. This makes it particularly suitable for machinery enclosures, electrical control panels and OEM equipment where secure mechanical installation and direct wiring are preferred. Because this model carries a higher-voltage coil designation, the exact operating range and coil supply requirements should be confirmed before energising the relay.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Manufacturer | Finder | |
| Series | 66 Series Power Relays | |
| Model | 66.82.8.400.1300 | |
| Product type | Electromagnetic power relay | |
| Relay operation | Electromechanical, non-latching | |
| Number of poles | 2 | |
| Coil voltage designation | 400 V AC | |
| Coil type | AC operated | |
| Contact system | Two-pole power switching | |
| Series nominal switching voltage | 250 V AC | |
| Series maximum switching voltage | Up to 440 V AC, subject to contact version and application conditions | |
| Series coil-to-contact impulse withstand voltage | 6 kV (1.2/50 µs) | |
| Series coil-to-contact creepage and clearance | 8 mm | |
| Insulation design | Reinforced insulation between coil and contacts | |
| Mounting type | Flange / chassis mounting | |
| Terminal type | Faston 250 quick-connect terminals | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Standard Series 66 ambient temperature range | −40 to +70 °C, subject to the exact product version | |
| Application category | Industrial electrical switching and automation control |
The Finder 66.82.8.400.1300 is an industrial electromagnetic power relay used to control electrical loads in automation equipment, machinery and power switching systems. Its two-pole construction allows two circuits to be operated through a common electromagnetic switching mechanism.
The ordering code identifies a 400 V AC coil voltage designation. The exact permitted supply voltage range, frequency and coil operating characteristics should be verified against Finder's product-specific documentation before connecting the relay to a control circuit.
The Finder Series 66 is a high-current power relay family with contact ratings that vary according to the particular configuration and switching duty. The exact current rating for 66.82.8.400.1300 should be confirmed from the manufacturer's datasheet rather than assuming that every Series 66 version has an identical rating. The permissible load also depends on whether the circuit is resistive, inductive or capacitive.
Yes. The 66.82 configuration is a two-pole power relay. The exact contact arrangement and terminal connections for this ordering code should be checked against the product-specific wiring diagram before installation.
The relay uses a flange / chassis mounting arrangement and Faston 250 (6.3 × 0.8 mm) quick-connect terminals. It is intended for installation within suitable electrical equipment or enclosures, with wiring, clearances, protection and mounting carried out in accordance with the manufacturer's instructions and applicable electrical safety requirements.
Finder Series 66 power relays provide practical electromechanical switching solutions for industrial automation, machinery control and electrical power management. With robust construction, reinforced coil-to-contact insulation, two-pole switching capability and convenient flange mounting, the Finder 66.82.8.400.1300 offers a useful option for equipment designers requiring a relay with a 400 V AC coil designation and direct-wired installation.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.