Finder 66.82.8.400.0300 - 66 Series Power relays

Finder 66.82.8.400.0300 – 66 Series Power relays

Finder 66.82.8.400.0300 – 66 Series Power relays.

SKU: 66.82.8.400.0300Alt SKU: 668284000300MPN: 66.82.8.400.0300
This product has been discontinued A direct replacement is available below.
Finder 66.82.8.400.4300 - 66 Series Power relays Replacement product Finder 66.82.8.400.4300 - 66 Series Power relays SKU: 66.82.8.400.4300 View

Why Choose the Finder 66.82.8.400.0300 Power Relay?

The Finder 66.82.8.400.0300 is a heavy-duty 30 A electromechanical power relay designed for reliable switching of electrical loads in industrial automation, heating equipment and machinery control systems. As part of the established Finder 66 Series power relay range, it combines high-current switching capability with reinforced insulation and a robust flange-mounted construction suitable for industrial electrical installations.

Featuring a 400 V AC operating coil and two normally open contacts (DPST-NO), the Finder 66.82.8.400.0300 enables two electrical circuits to be switched simultaneously through a common control signal. Its electromechanical construction provides galvanic isolation between the operating coil and power contacts, making it suitable for applications requiring dependable switching and electrical separation between control and load circuits.

The Finder 66.82-0300 relay family provides a 30 A rated contact current, 250 V AC rated switching voltage and 7,500 VA AC1 resistive switching capacity. Its flange-mounted design and 6.3 × 0.8 mm Faston quick-connect terminals allow secure installation and straightforward wiring in industrial electrical equipment and control assemblies.

Key Advantages

  • Heavy-duty 30 A industrial power relay for demanding electrical switching applications.
  • 400 V AC nominal coil voltage for compatible industrial AC control circuits.
  • Two normally open contacts (DPST-NO) enable simultaneous switching of two electrical circuits.
  • 250 V AC rated contact voltage with a maximum switching voltage of 440 V AC for the standard series.
  • 7,500 VA AC1 switching capacity for resistive electrical loads.
  • Flange mounting provides secure installation on electrical panels and equipment chassis.
  • Faston 250 quick-connect terminals simplify wiring, servicing and replacement.
  • Reinforced coil-to-contact insulation with 6 kV impulse withstand capability.
  • Robust electromechanical construction designed for industrial equipment and automation systems.

Key Features

  • Finder 66 Series industrial power relay.
  • 30 A rated contact current.
  • 400 V AC nominal coil voltage.
  • Two normally open contacts (2 NO / DPST-NO).
  • 250 V AC rated switching voltage.
  • 440 V AC maximum switching voltage for the standard 66.82-0300 series.
  • 50 A maximum peak contact current for the standard series.
  • 7,500 VA AC1 rated resistive switching load.
  • 1,200 VA AC15 rated switching load at 230 V AC.
  • AC-operated electromagnetic coil for industrial control applications.
  • 8 mm creepage and clearance distances between coil and contacts.
  • 6 kV coil-to-contact impulse withstand voltage.
  • Rear flange mounting for electrical panels and equipment assemblies.
  • 6.3 × 0.8 mm Faston 250 terminals for convenient electrical connections.
  • Non-latching electromechanical switching operation.
  • Suitable for industrial heating, power switching and machinery control applications.

Reliable High-Current Switching for Industrial Automation

Electromechanical power relays such as the Finder 66.82.8.400.0300 allow electrical loads to be controlled through an independent operating circuit. When the 400 V AC coil is energised, the relay closes its two normally open contact sets, allowing electrical current to flow through the connected load circuits. When the coil is de-energised, the contacts return to their normally open state.

The Finder 66 Series is engineered for industrial applications requiring dependable high-current switching and electrical separation between control and power circuits. Its reinforced insulation, 8 mm creepage and clearance distances and high-capacity contact arrangement make the relay family suitable for machinery control, industrial heating equipment and electrical load management systems.

The 66.82 flange-mounted construction provides secure mechanical installation on panels and equipment chassis, while its Faston quick-connect terminals simplify electrical wiring and maintenance. The two-pole normally open arrangement allows simultaneous switching of two circuits, making it a practical solution for industrial control engineers and OEM equipment manufacturers. Correct coil supply, contact ratings, conductor sizing and protective devices must be considered during installation.

Typical Applications

  • Industrial automation and machinery control systems.
  • Industrial heating equipment, ovens and furnaces.
  • Commercial and industrial boiler control systems.
  • Heating, ventilation and air conditioning equipment.
  • Industrial washing machines and processing machinery.
  • Electrical load switching and power management assemblies.
  • Resistive heating elements and temperature control equipment.
  • Industrial motor control circuits within applicable load ratings.
  • OEM electrical equipment and machine building.
  • High-current auxiliary switching in industrial control panels.

Technical Specifications

Tick the specs you need, then view products that match.

Device Type Power Relay
Terminal Type Faston / flat-pin
Load Voltage 440 V AC
Switching Current (A) 30 A
Manufacturer Finder
Series 66 Series Power Relays
Model 66.82.8.400.0300
Product type Electromechanical power relay
Relay operation Non-latching
Number of poles 2
Contact configuration DPST-NO (2 normally open contacts)
Rated contact current 30 A
Maximum peak contact current 50 A (standard series)
Rated switching voltage 250 V AC
Maximum switching voltage 440 V AC (standard series)
Rated resistive load (AC1) 7,500 VA
Rated inductive load (AC15) 1,200 VA at 230 V AC
Single-phase motor rating 1.5 kW at 230 V AC (standard series)
DC1 breaking capacity at 30 V DC 25 A
DC1 breaking capacity at 110 V DC 0.7 A
DC1 breaking capacity at 220 V DC 0.3 A
Minimum switching load 1,000 mW (10 V / 10 mA)
Nominal coil voltage 400 V AC
Coil type AC
Contact material Silver cadmium oxide (AgCdO), standard contact version
Coil-to-contact insulation Reinforced
Coil-to-contact creepage and clearance 8 mm
Coil-to-contact impulse withstand voltage 6 kV (1.2/50 µs)
Coil-to-contact dielectric strength 4,000 V AC
Dielectric strength between open contacts 1,500 V AC
Mechanical life 10 million operations (standard series)
Electrical life 100,000 operations at rated AC1 load (standard series)
Operate time Approximately 8 ms (standard series)
Release time Approximately 10 ms (standard series)
Operating temperature −40 to +70 °C (standard series)
Environmental protection category RT II (standard series)
Mounting type Rear flange / chassis mounting
Terminal type Faston 250 quick-connect
Terminal dimensions 6.3 × 0.8 mm

Frequently Asked Questions

What is the Finder 66.82.8.400.0300 used for?

The Finder 66.82.8.400.0300 is an industrial electromechanical power relay designed for switching electrical loads in machinery, industrial heating equipment, automation systems and power control applications.

What coil voltage does the Finder 66.82.8.400.0300 require?

The part number identifies a 400 V AC nominal coil voltage. The exact operating characteristics of this coil variant should be checked against the equipment's control supply, as the coil voltage is separate from the relay's contact switching voltage.

What is the contact rating of this relay?

The Finder 66.82-0300 relay family provides a 30 A rated contact current at 250 V AC, with a standard AC1 resistive switching capacity of 7,500 VA. Permissible switching loads depend on the contact configuration, switching voltage and load characteristics.

What contact configuration does the Finder 66.82.8.400.0300 have?

The relay features two normally open contacts (DPST-NO). Both contacts close when the operating coil is energised and return to their normally open state when the coil supply is removed.

How is the Finder 66.82.8.400.0300 installed?

The Finder 66.82 relay family uses a rear flange mounting arrangement for secure installation on electrical panels or equipment chassis. Electrical connections are made using 6.3 × 0.8 mm Faston 250 quick-connect terminals.

Trusted by Industrial Automation Professionals Worldwide

Finder 66 Series power relays are designed to deliver dependable high-current electrical switching for industrial automation, heating equipment and machinery control applications. With reinforced insulation, robust electromechanical construction and practical flange-mounted designs, the series provides a versatile solution for electrical engineers, OEM machine builders and industrial maintenance professionals.