Call Us Today 01706 242050
Finder 65.61.9.008.0300 - 65 Series Power relays

Finder 65.61.9.008.0300 – 65 Series Power relays

Finder 65.61.9.008.0300 – 65 Series Power relays.

SKU: 65.61.9.008.0300Alt SKU: 656190080300MPN: 65.61.9.008.0300
This product has been discontinued A direct replacement is available below.
Finder 65.61.9.008.4300 - 65 Series Power relays Replacement product Finder 65.61.9.008.4300 - 65 Series Power relays SKU: 65.61.9.008.4300 View

Why Choose the Finder 65.61.9.008.0300 Power Relay?

The Finder 65.61.9.008.0300 is an electromechanical power relay from the Finder 65 Series, designed for electrical load switching, industrial control and automation applications. Featuring an 8 V DC operating coil and a single normally open contact (1 NO), this relay provides a straightforward interface between a low-voltage control circuit and a separately powered electrical load.

The Finder 65.61.9.008.0300 is particularly useful where a control signal must operate an independent switching circuit. Its single-pole normally open contact arrangement allows the connected load circuit to remain open when the relay is de-energised and close when the operating coil is energised.

As part of Finder's industrial power relay range, the 65.61.9.008.0300 offers a practical switching solution for equipment manufacturers, electrical panel builders and maintenance engineers. The complete manufacturer part number should be used when specifying or replacing the relay to ensure the correct coil voltage, contact arrangement and variant characteristics.

Key Advantages

  • 8 V DC operating coil enables switching from compatible low-voltage DC control circuits.
  • Single normally open contact provides straightforward on/off switching.
  • Electromechanical operation provides galvanic separation between the operating coil and switching contact.
  • Single-pole switching is suitable for controlling an independent electrical load circuit.
  • Monostable operation returns the contact to its normal open position when the coil is de-energised.
  • Industrial power relay design supports integration into electrical control equipment.
  • Simple control interface allows a compatible DC signal to operate a separate load circuit.
  • Finder 65 Series construction provides a recognised relay platform for electrical switching applications.
  • Suitable for OEM machinery, industrial equipment and electrical control assemblies.
  • Useful for replacement applications requiring the exact Finder relay configuration.

Key Features

  • Finder 65 Series electromechanical power relay.
  • 65.61 configuration with one normally open contact.
  • 1 NO contact arrangement for single-circuit switching.
  • 8 V DC nominal coil voltage.
  • Direct-current electromagnetic coil operation.
  • Single-pole, normally open switching function.
  • Monostable electromechanical operating mechanism.
  • Electrical separation between the coil and contact circuits.
  • Suitable for switching compatible electrical loads within the manufacturer's specified ratings.
  • Designed for integration into industrial and commercial electrical equipment.
  • Applicable to machinery control, auxiliary switching and automation systems.
  • Identified by manufacturer part number 65.61.9.008.0300.

Low-Voltage DC Control for Electrical Load Switching

The Finder 65.61.9.008.0300 provides an electromechanical switching interface between an 8 V DC control supply and a separate electrical circuit. When the coil is energised, the electromagnetic mechanism operates the normally open contact, completing the connected load circuit. When the coil is de-energised, the contact returns to its open position.

This arrangement is useful in equipment where a low-voltage control signal must operate a separately supplied load. Potential applications include auxiliary switching, machinery control, equipment signalling and electrical automation, provided the connected load and operating conditions are compatible with the relay's manufacturer ratings.

Before installation, engineers should verify the contact current rating, switching voltage, load category, inrush characteristics, connection arrangement and mounting requirements against Finder documentation for the exact 65.61.9.008.0300 variant. The 8 V DC coil voltage specifies the relay's nominal operating supply and must not be confused with the permissible voltage across its switching contact.

Typical Applications

  • Low-voltage DC-controlled electrical switching.
  • Industrial machinery and equipment control.
  • Electrical control panels and automation assemblies.
  • Auxiliary load-switching circuits.
  • Equipment enable and disable functions.
  • Industrial signalling and control interfaces.
  • OEM machinery and electrical equipment manufacturing.
  • Process equipment control systems.
  • Building services and electrical automation.
  • Control circuits requiring galvanic separation from a switched load.
  • Maintenance and replacement of compatible Finder 65 Series relays.

Technical Specifications

Tick the specs you need, then view products that match.

Device Type Power Relay
Manufacturer Finder
Series 65 Series
Manufacturer part number 65.61.9.008.0300
Product category Electromechanical power relay
Relay technology Electromechanical
Contact configuration 1 NO (single normally open contact)
Number of poles 1
Nominal coil voltage 8 V DC
Coil supply type Direct current (DC)
Operating principle Electromagnetic, monostable
Contact operation Normally open contact closes when the coil is energised
Product family Finder 65 Series Power Relays

Frequently Asked Questions

What is the Finder 65.61.9.008.0300 used for?

The Finder 65.61.9.008.0300 is an electromechanical power relay used for controlling an electrical load circuit through a separate DC control signal. It is suitable for compatible machinery, automation and auxiliary switching applications.

What coil voltage does the Finder 65.61.9.008.0300 require?

The relay has a nominal operating coil voltage of 8 V DC. The supply must be compatible with the manufacturer's specified coil operating limits, and the relay should not be connected directly to an AC supply or a different DC voltage without verifying suitability.

What contact arrangement does the Finder 65.61.9.008.0300 have?

The Finder 65.61.9.008.0300 has a single normally open contact (1 NO). The contact is open when the relay is de-energised and closes when the operating coil is energised.

Is the Finder 65.61.9.008.0300 a latching relay?

No. The Finder 65.61.9.008.0300 uses a monostable electromechanical operating principle. Its normally open contact closes while the coil is energised and returns to its open position when the coil is de-energised.

What should be checked before installing the Finder 65.61.9.008.0300?

Before installation, confirm the 8 V DC coil supply, single normally open contact arrangement, applicable contact ratings, terminal configuration, mounting requirements and any variant-specific characteristics against Finder documentation for the exact part number. The connected load must remain within the relay's specified switching limits.

Trusted by Industrial Automation and Control Engineers Worldwide

Finder power relays provide electromechanical switching solutions for electrical control, machinery and automation equipment. The Finder 65.61.9.008.0300 combines an 8 V DC operating coil with a single normally open contact, providing a practical interface between compatible low-voltage control systems and electrical switching circuits.