Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 65.31.8.125.0300 – 65 Series Power relays.
The Finder 65.31.8.125.0300 is a high-current electromagnetic power relay from the Finder 65 Series, designed for industrial automation, electrical control panels and power switching applications. Featuring a 125 V AC operating coil and a single normally open contact (SPST-NO / 1 NO), it provides straightforward control of an electrical load through an electromagnetic switching mechanism.
The Finder 65.31-0300 configuration features a 30 A rated contact current and a minimum 3 mm open contact gap, making it suitable for appropriately rated industrial switching applications. Its normally open contact closes when the coil is energised and returns to the open position when coil power is removed.
With rear flange mounting and Faston 250 quick-connect terminals, the Finder 65.31.8.125.0300 offers a practical connection and installation arrangement for industrial machinery, electrical equipment and control assemblies.
The Finder 65.31.8.125.0300 uses a 125 V AC electromagnetic coil to operate a single normally open power contact. When the coil is energised, the contact closes to complete the connected load circuit. When the coil supply is removed, the relay returns to its normal open position.
The 30 A contact rating and minimum 3 mm contact gap make the 65.31-0300 configuration suitable for a range of appropriately rated industrial switching duties. The specified contact separation does not, by itself, establish suitability for safety isolation or emergency-stop functions.
The Faston 250 terminals and rear flange mounting arrangement support installation in compatible electrical equipment. When selecting this relay, the load current, switching voltage, inrush characteristics and duty cycle should be checked against the applicable manufacturer ratings.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Switching Current (A) | 30 A | |
| Manufacturer | Finder | |
| Series | 65 Series | |
| Model | 65.31.8.125.0300 | |
| Product type | Electromagnetic power relay | |
| Contact configuration | SPST-NO / 1 NO / 1 Form A | |
| Number of poles | 1 | |
| Number of normally open contacts | 1 | |
| Rated contact current | 30 A | |
| Rated contact voltage | 250 V AC | |
| Rated switching capacity (AC1) | 7500 VA | |
| Minimum open contact gap | 3 mm | |
| Nominal coil voltage | 125 V AC | |
| Coil supply type | AC | |
| Operating principle | Electromagnetic, monostable | |
| Mounting arrangement | Rear flange | |
| Terminal type | Faston 250 quick-connect | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Application | Industrial electrical control and power switching |
The Finder 65.31.8.125.0300 is an electromagnetic power relay used for industrial electrical control and switching applications requiring a 125 V AC coil and a single normally open power contact.
The relay has a 125 V AC nominal coil voltage. The applied control supply must match the manufacturer's specified AC operating requirements.
The relay features one normally open contact (1 NO), also described as an SPST-NO or 1 Form A configuration.
The Finder 65.31-0300 configuration has a 30 A rated contact current. Actual load suitability depends on the switching voltage, load characteristics and applicable manufacturer ratings.
The normally open contact has a specified separation of at least 3 mm when open.
The relay features a rear flange mounting arrangement for installation in compatible industrial electrical equipment.
The relay uses Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm.
No. It uses a monostable electromagnetic operating mechanism, meaning the normally open contact returns to its open position when the coil is de-energised.
No. The Finder 65.31.8.125.0300 has a 125 V AC coil. A suitable DC-coil relay must be selected for DC control supplies.
The relay may switch suitable DC loads only within the manufacturer's specified DC contact ratings. Its 30 A AC contact rating must not automatically be applied to DC switching applications.
Finder 65 Series power relays are designed for industrial electrical control and power switching applications. The Finder 65.31.8.125.0300 combines a 125 V AC coil, a 30 A normally open contact, a minimum 3 mm contact gap and practical Faston quick-connect terminals in a rear flange-mounted design for compatible industrial equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.