Call Us Today 01706 242050
Finder 43.61.9.006.2300 - 43 Series PCB relays

Finder 43.61.9.006.2300 – 43 Series PCB relays

Finder 43.61.9.006.2300 – 43 Series PCB relays.

SKU: 43.61.9.006.2300Alt SKU: 436190062300MPN: 43.61.9.006.2300
This product has been discontinued A direct replacement is available below.
Finder 43.61.9.006.4300 - 43 Series PCB relays Replacement product Finder 43.61.9.006.4300 - 43 Series PCB relays SKU: 43.61.9.006.4300 View

Why Choose the Finder 43.61.9.006.2300 PCB Relay?

The Finder 43.61.9.006.2300 is a compact electromechanical PCB power relay designed for switching electrical loads in industrial automation, electronic control equipment and building management systems. As part of the Finder Series 43 miniature PCB relay range, it provides a space-efficient solution for equipment manufacturers and control engineers requiring dependable switching from a low-voltage DC control circuit.

Featuring a single-pole normally open (SPST-NO) contact arrangement, the relay allows a low-voltage control signal to switch a separate electrical load. Its monostable electromagnetic operating mechanism provides straightforward on/off switching, while the PCB mounting design makes it suitable for integration into electronic control modules, industrial equipment and OEM assemblies.

With a nominal 6 V DC coil voltage, the Finder 43.61.9.006.2300 is suitable for electronic systems using an appropriately designed DC relay driver. The Finder 43.61 configuration is intended for power switching applications, combining normally open contact operation with compact through-hole PCB construction for efficient installation in electronic control equipment.

Key Advantages

  • Compact miniature electromechanical PCB power relay for industrial and electronic control applications.
  • 6 V DC nominal coil voltage suitable for low-voltage electronic control systems.
  • Single-pole normally open contact provides straightforward electrical load switching.
  • Monostable relay operation automatically returns the contacts to their normal state when the coil is de-energised.
  • Electromagnetic switching provides galvanic separation between the control coil and load contacts.
  • Through-hole PCB mounting supports integration into printed circuit board assemblies.
  • Compact construction helps reduce space requirements in electronic control equipment.
  • Suitable for industrial automation, building controls and OEM electronic applications.

Key Features

  • Finder Series 43 miniature PCB power relay.
  • 43.61.9.006.2300 manufacturer part number.
  • 6 V DC nominal coil voltage.
  • Single-pole single-throw normally open (SPST-NO) contact configuration.
  • 1 NO (1 Form A) switching contact.
  • DC-operated electromagnetic coil.
  • Non-latching, monostable relay mechanism.
  • Galvanically isolated coil and contact circuits.
  • Through-hole PCB mounting with solder terminals.
  • Compact relay construction for electronic equipment.
  • Suitable for electrical load switching and automation control circuits.

Reliable Electrical Switching for Industrial Control Systems

Electromechanical relays such as the Finder Series 43 use an electromagnetic coil to control mechanically operated electrical contacts. When the coil is energised, the normally open contact closes, allowing current to flow through the connected load circuit. When the coil is de-energised, the contact returns to its open position. This enables a low-voltage control circuit to operate a separate electrical load without requiring a direct electrical connection between the coil and contact circuits.

The Finder 43.61.9.006.2300 is designed for electronic control assemblies requiring compact construction and reliable normally open switching. Its 6 V DC coil makes it suitable for low-voltage control electronics, while the through-hole solder terminals provide a practical mounting solution for PCB manufacturers. Appropriate coil driving circuitry, contact protection and load ratings should be considered when incorporating the relay into an electrical system.

Typical Applications

  • Industrial automation and electronic control systems.
  • Printed circuit board assemblies and electronic control modules.
  • PLC interface and auxiliary switching circuits.
  • Building automation and electrical control equipment.
  • Industrial machinery and OEM electronic assemblies.
  • Electrical appliances and equipment control boards.
  • Power switching within compatible electrical load ratings.
  • Low-voltage electronic control interfaces.

Technical Specifications

Tick the specs you need, then view products that match.

Device Type PCB Relay
Terminal Type PCB / pins
Mounting Type PCB
Manufacturer Finder
Series Series 43
Type 43.61
Model 43.61.9.006.2300
Product type Miniature electromechanical PCB power relay
Contact configuration 1 NO (SPST-NO, 1 Form A)
Number of poles 1
Rated coil voltage 6 V DC
Coil supply type DC
Relay operation Monostable, non-latching
Contact operation Normally open
Mounting type PCB through-hole mounting
Terminal type Solder pins
Application Electrical load switching and electronic control

Frequently Asked Questions

What is the Finder 43.61.9.006.2300 used for?

The Finder 43.61.9.006.2300 is a miniature electromechanical PCB power relay used to switch electrical loads in industrial automation systems, electronic control boards, building controls and OEM equipment.

What coil voltage does the Finder 43.61.9.006.2300 require?

The relay operates from a nominal 6 V DC coil supply and should be driven using a control circuit designed for its coil requirements.

What contact configuration does this relay have?

The relay features a single-pole single-throw normally open (SPST-NO), 1 Form A contact. The contact closes when the coil is energised and returns to its open state when the coil is de-energised.

Is the Finder 43.61.9.006.2300 a latching relay?

No. The Finder 43.61.9.006.2300 is a monostable, non-latching relay, meaning it returns to its normal contact position when the coil supply is removed.

How is the Finder 43.61.9.006.2300 installed?

The relay is designed for through-hole PCB mounting using solder terminals. It is intended for integration into printed circuit boards used in electronic control systems and industrial equipment.

Trusted Relay Technology for Industrial and Electronic Applications

Finder Series 43 miniature PCB relays provide practical switching solutions for electronic equipment manufacturers, automation engineers and electrical control system designers. Their compact construction, low-voltage coil operation and dependable electromechanical switching make them suitable for a wide range of industrial and electronic control applications.