Finder 30.22.9.012.0020 – 30 Series Subminiature DIL relays

Why Choose the Finder 30.22.9.012.0020 PCB Relay?

The Finder 30.22.9.012.0020 is a compact 2 A PCB-mounted electromechanical relay designed for switching electrical signals and compatible loads in electronic control equipment. Part of the Finder Series 30 subminiature relay range, this device features a 12 V DC operating coil, changeover contact functionality and gold-plated silver nickel contacts, making it suitable for space-constrained electronic applications.

Designed for direct integration into printed circuit boards, the Finder 30.22.9.012.0020 combines dependable switching performance with a compact dual-in-line construction. Its gold-plated silver nickel (AgNi + Au) contacts provide a suitable contact surface for low-level signal switching, while the 2 A switching current and 250 V AC switching voltage rating support a range of compatible electrical control applications.

The relay also features a wash-tight RT III construction, making it suitable for PCB assembly processes where protection against specified cleaning conditions is required. Its cadmium-free contact material and compact PCB mounting arrangement make it a practical component for electronic equipment manufacturers, control system designers and maintenance engineers.

Key Advantages

• Compact subminiature PCB relay for space-saving electronic circuit designs.
• 12 V DC operating coil for compatible low-voltage control electronics.
• 2 A switching current for suitable signal and electrical load applications.
• Changeover contact functionality provides flexible switching between circuit paths.
• 250 V AC switching voltage rating for compatible electrical circuits.
• Gold-plated silver nickel contacts support dependable low-level signal switching.
• PCB through-hole mounting enables integration into electronic assemblies.
• Dual-in-line construction simplifies PCB layout and component positioning.
• Wash-tight RT III protection supports suitable PCB cleaning processes.
• Cadmium-free contact material supports environmentally conscious component selection.
• Wide operating temperature range of −40 to +85 °C.
• Suitable for electronic control, signal switching and automation equipment.

Key Features

• Finder Series 30 subminiature electromechanical relay.
• 12 V DC nominal coil voltage.
• 2 A rated switching current.
• 250 V AC switching voltage rating.
• Changeover (CO) contact functionality.
• Gold-plated silver nickel (AgNi + Au) contact material.
• Compact dual-in-line PCB construction.
• Through-hole PCB mounting.
• Wash-tight RT III enclosure classification.
• Cadmium-free contact construction.
• −40 to +85 °C operating temperature range.
• Approximately 20.2 mm body width as listed in distributor specifications.
• cURus component recognition.
• Country of origin: Slovenia.

For production PCB designs, confirm the manufacturer's current dimensional drawing, terminal arrangement, contact configuration, coil drive requirements and electrical load ratings before finalising the circuit layout.

Compact PCB Relay Design for Electronic Equipment

The Finder 30.22.9.012.0020 is designed for applications where conventional industrial relays would occupy too much space. Its subminiature dual-in-line construction allows the relay to be integrated directly into a printed circuit board, eliminating the need for a separate DIN rail socket or panel-mounted relay assembly.

PCB-mounted relays are widely used in electronic controllers, monitoring equipment, interface circuits and compact automation systems. They allow a low-voltage control circuit to operate separate electrical contacts, providing electromechanical switching functionality within a relatively small component footprint.

The 12 V DC coil makes this model suitable for electronic systems equipped with an appropriately rated DC supply and relay-driving circuit. Designers should ensure that the control electronics can deliver the required coil current and provide appropriate transient suppression where necessary.

Gold-Plated Silver Nickel Contacts for Signal Switching

A distinguishing feature of the Finder 30.22.9.012.0020 is its AgNi + Au contact material. Silver nickel provides a durable electrical contact base, while the gold-plated surface is particularly useful in applications involving relatively low switching currents and signal levels.

Gold-plated contacts can help maintain reliable electrical connections in suitable low-level signal circuits. This makes the relay attractive for control interfaces, electronic monitoring equipment, instrumentation and other applications where dependable contact performance is important.

Although the relay is rated for switching currents up to 2 A, the actual permissible load depends on the voltage, load type, switching frequency and electrical characteristics of the connected circuit. Inductive loads, capacitive loads and circuits with high inrush currents require particular attention during component selection.

Wash-Tight RT III Construction for PCB Assembly

The Finder 30.22.9.012.0020 features a wash-tight RT III enclosure classification, which is useful in electronic manufacturing processes involving specified PCB cleaning operations.

This construction helps protect the relay's internal components against the ingress conditions covered by its RT III classification during appropriate assembly and cleaning procedures. It does not mean that the relay is suitable for unrestricted exposure to water, outdoor installation or continuous immersion.

For electronic equipment manufacturers, the wash-tight construction provides flexibility when incorporating the relay into automated PCB assembly processes. Cleaning methods, soldering profiles and handling procedures should always follow the manufacturer's recommendations.

Typical Applications

• Printed circuit board control assemblies.
• Electronic signal switching circuits.
• Industrial electronic control equipment.
• Low-voltage automation interfaces.
• Instrumentation and monitoring systems.
• Audio signal routing and electronic switching.
• Medical electronic equipment, subject to applicable design requirements.
• Building automation control electronics.
• Electronic alarm and monitoring equipment.
• Compact embedded control systems.
• Electronic test and measurement equipment.
• OEM electronic product manufacturing.
• Replacement and maintenance of compatible PCB relay assemblies.