Finder 093.63.8230 – 93 Series Sockets for 34 Series relays – Accessory

Why Choose the Finder 093.63.8230 Output Fuse Module?

The Finder 093.63.8230 is a 110–240 V AC output fuse module with LED fuse status indication, designed for compatible Finder Series 39 MasterINTERFACE relay interface modules. This plug-in accessory provides a convenient method of incorporating fuse protection into industrial control circuits while allowing maintenance personnel to identify the condition of the installed fuse.

Designed to accommodate a 5 × 20 mm cartridge fuse rated up to 6 A at 250 V, the Finder 093.63.8230 enables fuse protection to be incorporated into the output circuit of a compatible relay interface. Its LED status indicator provides a useful visual indication of fuse condition, supporting fault identification and maintenance within electrical control panels.

The module is intended for quick connection to compatible Finder Series 39 MasterINTERFACE sockets, including selected 39.31, 39.30, 39.81, 39.80, 39.61, 39.60, 39.91 and 39.90 configurations. It provides a practical solution for PLC output interfaces, industrial automation systems and machinery control installations where additional output circuit protection is required.

Key Advantages

• Integrated output fuse module for compatible Finder Series 39 MasterINTERFACE assemblies.
• 110–240 V AC operating range for the LED fuse status indication circuit.
• LED fuse status indicator supports convenient visual inspection.
• Accepts standard 5 × 20 mm cartridge fuses.
• Fuse capacity up to 6 A at 250 V, subject to the selected fuse and application.
• Provides additional fuse protection within compatible relay output circuits.
• Quick plug-in connection to the corresponding Finder interface socket.
• Helps simplify troubleshooting and maintenance of industrial control equipment.
• Allows the fuse module to be removed and replaced without replacing the complete relay interface assembly.
• Supports organised and compact PLC interface installations.
• Part of the Finder Series 39 MasterINTERFACE accessory system.

Key Features

• Finder output fuse module accessory.
• Model 093.63.8230.
• Accessory family: Finder 093.63.
• LED fuse status indication.
• Indication circuit operating voltage: 110–240 V AC.
• Compatible fuse format: 5 × 20 mm cartridge fuse.
• Maximum specified fuse rating: 6 A, 250 V.
• Plug-in mounting to compatible Finder Series 39 relay interface sockets.
• Fuse is connected electrically in series with the interface output common terminal.
• Provides visible access to the fuse condition through the module window.
• Supports the Finder MasterINTERFACE multi-state fuse module arrangement.
• Designed for selected electromechanical relay and solid state relay interface configurations.
• Suitable for PLC interface and industrial automation installations.
• Can replace the bridging module fitted to compatible interface sockets.
• Removal of the fuse module opens the associated output circuit.

Reliable Fuse Protection for PLC and Relay Interface Outputs

Industrial automation systems frequently use relay interface modules to connect programmable logic controllers to field devices, control circuits and electrical loads. These interface modules provide convenient switching arrangements, but the connected output circuits may also require appropriately selected overcurrent protection.

The Finder 093.63.8230 output fuse module provides a compact method of introducing a cartridge fuse into a compatible Finder MasterINTERFACE output circuit. The fuse is connected in series with the output common terminal, allowing the selected fuse to interrupt the circuit when its operating characteristics and fault conditions require it.

The module accommodates a 5 × 20 mm cartridge fuse with a maximum specified rating of 6 A at 250 V. The actual fuse current rating and operating characteristic must be selected according to the protected circuit, relay output rating, connected load and applicable electrical protection requirements. The module's maximum fuse capacity does not increase the current rating of the associated relay interface.

A distinguishing feature of the 093.63.8230 is its 110–240 V AC LED fuse status indication. This assists maintenance personnel in identifying fuse conditions during inspection and fault diagnosis, reducing the need to trace every output circuit individually.

The Finder MasterINTERFACE system uses a bridging module to maintain output circuit continuity when an optional fuse module is not installed. The bridging module can be replaced with the appropriate 093.63 fuse module. Removing the fuse module opens the associated output circuit, providing a defined disconnected condition until a functional fuse module or suitable bridging module is reinserted.

For reliable operation, the fuse module must be matched to a compatible Series 39 interface and the correct indication voltage. Installation, fuse replacement and servicing should be performed with the circuit safely isolated and in accordance with Finder's technical instructions.

Typical Applications

• Output fuse protection for compatible Finder Series 39 MasterINTERFACE modules.
• PLC output interface circuits.
• Industrial automation control panels.
• Machinery control and relay switching assemblies.
• Electrical control cabinets and distribution systems.
• Industrial process control installations.
• Manufacturing and production equipment.
• Control systems requiring visible fuse status indication.
• Maintenance and refurbishment of existing Finder relay interface assemblies.
• OEM electrical equipment and automation panel manufacturing.
• Compatible electromechanical and solid state relay interface applications.