Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 093.63.0024 – 93 Series Sockets for 34 Series relays – Accessory
Finder 093.63.0024 is a plug-in output fuse module with LED fuse status indication for 6-24 V AC/DC applications, designed for compatible Finder 39 Series MasterINTERFACE relay modules and 5 x 20 mm cartridge fuses up to 6 A at 250 V.
£3.31
Why Choose the Finder 093.63.0024 Output Fuse Module with LED Indicator?
The Finder 093.63.0024 is a compact plug-in output fuse module with an integrated LED fuse status indicator, designed for compatible Finder 39 Series MasterINTERFACE relay interface modules. Also identified in Finder technical documentation as 093.63.0.024, this accessory combines cartridge fuse protection with visual fuse status indication for low-voltage industrial control circuits.
Designed for applications operating at 6–24 V AC/DC, the Finder 093.63.0024 accommodates standard 5 × 20 mm cartridge fuses rated up to 6 A at 250 V. Its plug-in construction allows the module to be installed directly into a compatible relay interface socket, providing a convenient alternative to a separately mounted fuse holder.
The integrated LED fuse status indicator helps maintenance personnel identify fuse conditions in suitable powered circuits. This makes the module particularly useful in PLC output interfaces, automation panels, machinery control systems and electrical installations where rapid fault identification can reduce troubleshooting time.
As a genuine Finder 93 Series accessory, the 093.63.0024 is designed for the manufacturer's modular MasterINTERFACE system. It provides an accessible fuse position within the relay output circuit while maintaining the compact arrangement of compatible interface modules.
Key Advantages
- Genuine Finder output fuse module with LED status indication.
- Designed for compatible Finder 39 Series MasterINTERFACE relay modules.
- 6–24 V AC/DC operating range for the LED indication function.
- Accommodates standard 5 × 20 mm cartridge fuses.
- Supports cartridge fuses rated up to 6 A at 250 V.
- Integrated LED helps identify fuse status during fault investigation.
- Convenient quick plug-in connection to compatible relay interface sockets.
- Provides a compact fuse position within the relay output circuit.
- Helps simplify maintenance and replacement of cartridge fuses.
- Suitable for low-voltage PLC and industrial automation applications.
- Supports organised electrical control panel construction.
- Available as a dedicated replacement or installation accessory.
- Suitable for compatible electromechanical and solid-state relay interface configurations.
Key Features
- Finder 093.63.0024 LED output fuse module.
- Manufacturer catalogue reference: 093.63.0.024.
- Part of the Finder 93 Series accessory range.
- Designed for Finder 39 Series MasterINTERFACE relay modules.
- LED fuse status indicator for suitable powered circuits.
- LED operating voltage: 6–24 V AC/DC.
- Compatible with 5 × 20 mm cartridge fuses.
- Maximum fuse rating: 6 A, 250 V.
- Quick plug-in installation into compatible sockets.
- Fuse positioned in series with the relay interface output common connection.
- Compatible with selected electromechanical relay interface modules.
- Compatible with selected solid-state relay interface modules.
- Suitable for selected Finder 39 Series timer interface modules.
- Compact construction for space-efficient electrical panels.
- Designed for accessible cartridge fuse replacement.
- Suitable for PLC output and low-voltage control applications.
LED Fuse Status Monitoring for Low-Voltage Control Circuits
The Finder 093.63.0024 is designed to provide fuse protection and visual status indication within compatible low-voltage relay interface circuits. The module's integrated LED operates over a specified 6–24 V AC/DC range, making it suitable for applications using common industrial control voltages.
In an electrical control panel, identifying a blown fuse can otherwise require individual inspection or electrical testing. The LED status indicator provides a convenient visual aid for troubleshooting, allowing maintenance personnel to identify the relevant fuse module more quickly when the circuit is in the appropriate operating condition.
The module accepts a standard 5 × 20 mm cartridge fuse. Finder specifies a maximum fuse rating of 6 A at 250 V, although the actual fuse selected must match the protected circuit and the electrical ratings of the connected relay interface. A 6 A fuse is not automatically suitable for every compatible module or connected load.
The Finder 093.63.0024 is especially useful for PLC output interfaces, where a relay module may be used to switch a field device such as a solenoid valve, contactor control circuit or signalling component. Incorporating a fuse directly into the interface assembly can help maintain a compact and serviceable control panel layout.
The LED indication is a diagnostic aid rather than a substitute for safe electrical testing. Its behaviour depends on the circuit voltage and operating conditions, and maintenance personnel should verify the fuse and circuit condition using appropriate procedures before replacing components.
How the Finder MasterINTERFACE Multi-State Fuse System Works
Compatible Finder 39 Series MasterINTERFACE sockets use a modular output connection arrangement. In the standard configuration, the socket is supplied with a bridging module that establishes continuity in the output circuit without a cartridge fuse module installed.
To introduce fuse protection, the bridging module is removed and replaced with the Finder 093.63.0024 containing a correctly selected, functioning cartridge fuse. The fuse is then connected electrically in series with the output common terminal.
The terminal designation depends on the type of relay interface. Finder identifies terminal 11 for applicable electromechanical relay versions, 13+ for solid-state relay versions, 15 for electromechanical timer versions and 15+ for solid-state timer versions.
If the fuse module is removed, the output circuit is interrupted in the manufacturer's specified arrangement. However, the circuit can be reinstated by fitting a functioning fuse module or the designated bridging module. Consequently, removing the fuse module must never be treated as a safety isolation procedure.
Finder also specifies an important restriction under UL 508A: the fuse module is not suitable for power circuits requiring a fuse certified to UL category JDDZ. It can be used in appropriate PLC output interface applications where the applicable installation requirements permit this arrangement.
Finder Output Fuse Module Comparison
| Finder Reference | Fuse Format | LED Status Indicator | LED Operating Voltage |
|---|---|---|---|
| 093.63 | 5 × 20 mm, up to 6 A / 250 V | No | Not applicable |
| 093.63.0024 / 093.63.0.024 | 5 × 20 mm, up to 6 A / 250 V | Yes | 6–24 V AC/DC |
| 093.63.8.230 | 5 × 20 mm, up to 6 A / 250 V | Yes | 110–240 V AC |
The Finder 093.63.0024 is the appropriate LED-equipped version for compatible 6–24 V AC/DC output circuits. For higher-voltage AC applications, the 093.63.8.230 is the corresponding LED-equipped alternative. The standard 093.63 provides fuse accommodation without an LED indicator.
Typical Applications
- Low-voltage PLC output interface protection.
- Finder 39 Series MasterINTERFACE relay installations.
- Industrial automation control panels.
- 24 V AC/DC control circuits.
- Machinery electrical control cabinets.
- Solenoid valve control circuits.
- Contactor control and signalling circuits.
- Building automation and HVAC control systems.
- Industrial process control equipment.
- Electrical panels requiring visible fuse status indication.
- Maintenance and replacement of LED-equipped fuse modules.
- Original equipment manufacturing using compatible Finder relay interfaces.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Accessory | |
|---|---|---|
| Manufacturer | Finder | |
| Product reference | 093.63.0024 | |
| Manufacturer catalogue reference | 093.63.0.024 | |
| Alternative ordering reference | 093630024 | |
| Product series | Finder 93 Series | |
| Product type | Plug-in output fuse module with LED indicator | |
| Accessory category | Relay interface fuse modules | |
| Associated interface series | Finder 39 Series MasterINTERFACE | |
| Compatible interface types | 39.30, 39.31, 39.60, 39.61, 39.80, 39.81, 39.90 and 39.91, subject to the complete module configuration | |
| LED status indication | Yes | |
| LED operating voltage | 6–24 V AC/DC | |
| Fuse type | Cylindrical cartridge fuse | |
| Fuse dimensions | 5 × 20 mm | |
| Maximum fuse current rating | 6 A | |
| Maximum fuse voltage rating | 250 V | |
| Connection method | Quick plug-in connection | |
| Fuse circuit position | In series with the interface output common terminal | |
| Electromechanical relay common terminal | 11, where applicable | |
| Solid-state relay common terminal | 13+, where applicable | |
| Electromechanical timer common terminal | 15, where applicable | |
| Solid-state timer common terminal | 15+, where applicable | |
| Associated mounting system | Finder 39 Series DIN rail relay interface assemblies | |
| Country of origin | Italy | |
| RoHS compliance | Yes | |
| EAN | 8012823401126 | |
| Relay interface included | No | |
| Cartridge fuse included | Check the supplier's stated package contents |
Frequently Asked Questions
What is the Finder 093.63.0024 used for?
The Finder 093.63.0024 is a plug-in output fuse module with an integrated LED fuse status indicator. It is designed for compatible Finder 39 Series MasterINTERFACE relay modules and allows a suitable cartridge fuse to be connected in series with the relay output circuit.
What voltage range does the Finder 093.63.0024 support?
The integrated LED fuse status indicator is designed for 6–24 V AC/DC applications. The module accepts cartridge fuses rated up to 6 A at 250 V, but the LED operating range and the fuse voltage rating are different specifications.
What size fuse does the Finder 093.63.0024 accept?
The module accepts standard 5 × 20 mm cartridge fuses with a maximum specified rating of 6 A at 250 V. The correct fuse rating must be selected according to the circuit and associated equipment.
Which Finder relay interfaces are compatible with the 093.63.0024?
The module is designed for compatible Finder 39 Series MasterINTERFACE types, including selected 39.30, 39.31, 39.60, 39.61, 39.80, 39.81, 39.90 and 39.91 configurations. Confirm compatibility with the complete relay interface and socket reference.
What is the difference between Finder 093.63 and 093.63.0024?
The Finder 093.63 is a standard output fuse module without an LED indicator. The Finder 093.63.0024, also catalogued as 093.63.0.024, includes an LED fuse status indicator for 6–24 V AC/DC circuits. Both accept suitable 5 × 20 mm cartridge fuses.
Can removing the Finder 093.63.0024 be used as a safety disconnect?
No. Removing the Finder 093.63.0024 must not be treated as a safe electrical isolation procedure. The output circuit can be reinstated by fitting a functioning fuse module or the designated bridging module. Always isolate the supply using an appropriate disconnecting device before electrical maintenance.
Trusted by Industrial Automation Engineers and Electrical Panel Builders
Finder MasterINTERFACE accessories provide compact, serviceable solutions for industrial control installations. The Finder 093.63.0024 combines a plug-in cartridge fuse holder with LED fuse status indication for 6–24 V AC/DC circuits, making it a practical accessory for compatible PLC output interfaces and low-voltage automation systems.
