Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£364.11
The WAGO 704-5044 is a compact and reliable 16-channel relay interface module with manual operation, designed for efficient signal switching and system wiring in industrial automation applications. As part of the WAGO 704 Series interface modules, it provides a practical connection between programmable logic controllers (PLCs) and field devices, helping simplify electrical control cabinet wiring and improve automation system flexibility.
This interface module incorporates 16 miniature switching relays, each providing one changeover contact, together with integrated status indication and manual operating functionality. The manual operation feature allows individual relay channels to be operated locally, supporting commissioning, maintenance and functional testing of connected equipment. Its 20-pole DIN 41651 male connector and triple-deck PCB terminal blocks enable organised connections between PLC outputs and industrial field wiring.
Operating from a nominal 24 V DC supply, the WAGO 704-5044 supports a maximum continuous current of 5 A per relay channel and switching voltages up to 250 V AC or 48 V DC. Its compact mounting carrier, integrated LED indicators and DIN-rail installation make it suitable for machinery control, PLC output interfacing and industrial automation systems requiring reliable multi-channel relay switching.
Relay interface modules such as the WAGO 704-5044 provide an effective connection between PLC control outputs and external electrical loads. The module uses electromechanical switching relays to control compatible AC and DC circuits while providing galvanic isolation between the control and load circuits. This helps protect sensitive control electronics and enables reliable switching of industrial equipment.
The WAGO 704-5044 is particularly useful in applications requiring local manual control of relay outputs. Its integrated manual operating functionality allows individual relay channels to be switched during commissioning, maintenance and diagnostic procedures, helping engineers verify field wiring and connected equipment without relying exclusively on automated PLC commands. Manual operation should be used in accordance with the machine's safety procedures and electrical operating requirements.
The module combines 16 relay channels within a compact DIN-rail assembly, reducing the need for individual interface relays and simplifying control cabinet wiring. Its 20-pole DIN 41651 connector supports structured PLC system cabling, while the triple-deck terminal blocks provide convenient field wiring connections. Integrated LED indicators allow operators to identify channel activity and supply status quickly.
The WAGO 704 Series supports industrial automation installations using compatible PLC systems and system wiring accessories. The 704-5044 can be integrated into suitable automation architectures where the connector pin assignment, control voltage and relay switching characteristics match the requirements of the connected equipment.
| Type of electrical connection, field-sided | Spring clamp connection |
|---|---|
| Type of electrical connection, control sided | Other |
| Height | 105 mm |
| Number of poles | 48 |
| Rated voltage | 50 V |
| Width | 121 mm |
| Rated current | 5 A |
| Pollution degree | 2 |
| Depth | 105 mm |
| Mounting method | DIN rail (top hat rail) 35 mm |
| Manufacturer | WAGO |
| Series | 704 Series Interface Modules and System Wiring |
| Model | 704-5044 |
| Product type | Relay interface module with manual operation |
| Interface function | PLC relay output interfacing |
| Number of relay channels | 16 |
| Relay type | Miniature switching relay |
| Relay reference | WAGO 857-152 |
| Contact configuration | 1 changeover contact per channel |
| Nominal operating voltage | 24 V DC |
| Operating voltage tolerance | ±10% |
| Maximum continuous current | 5 A per channel |
| Maximum switching voltage | 250 V AC / 48 V DC |
| Maximum resistive switching capacity | 1,250 VA AC / 50 W DC |
| Mechanical endurance | 10 × 106 switching operations |
| Manual operation | Integrated |
| System connector | DIN 41651 male connector |
| System connector poles | 20 |
| Field connection | Triple-deck PCB terminal blocks |
| Field connection poles | 48 |
| Supply connection | PCB terminal blocks |
| Supply connection poles | 4 |
| Conductor cross-section | 0.08–2.5 mm² |
| Supply fuse | 1 A |
| Relay output fuse | Not integrated |
| Status indication | Green LED per channel; yellow LED for power supply |
| Rated insulation voltage | 50 V |
| Rated surge voltage | 0.8 kV |
| Dielectric strength (control/load circuit) | 4 kV AC for 1 minute |
| Dielectric strength (load/load circuit) | 1 kV AC for 1 minute |
| Operating temperature | −25 to +40 °C |
| Storage temperature | −40 to +70 °C |
| Mounting type | 35 mm DIN rail |
| Mounting arrangement | Integrated mounting carrier |
| Dimensions (W × H × D) | 111 × 105 × 65 mm |
| Weight | Approx. 319 g |
The WAGO 704-5044 is a 16-channel relay interface module used to connect PLC control outputs to industrial electrical loads. It provides relay switching, galvanic isolation, integrated status indication and manual operation for automation control systems.
The module operates from a nominal 24 V DC supply with an operating voltage tolerance of ±10%. It is designed for compatible industrial PLC and automation control systems.
The module provides 16 relay output channels, each featuring one changeover contact and a maximum continuous current rating of 5 A. The maximum switching voltage is 250 V AC or 48 V DC.
Yes. The WAGO 704-5044 includes integrated manual operation, allowing relay channels to be operated locally for commissioning, maintenance and functional testing. It also includes green channel status LEDs and a yellow power supply indicator.
The module uses a 20-pole DIN 41651 male connector for system wiring and triple-deck PCB terminal blocks for field connections supporting conductors from 0.08 to 2.5 mm². It is supplied in a mounting carrier designed for installation on a standard 35 mm DIN rail inside an industrial control cabinet.
WAGO interface modules and system wiring solutions are used by automation engineers, control panel builders and OEM machine manufacturers to simplify electrical connections, improve system organisation and support reliable industrial control. The WAGO 704-5044 combines 16 relay output channels, manual operation, integrated status indication and compact DIN-rail installation to provide a flexible interface solution for modern PLC-based automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.