Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£77.50
The WAGO 704-2054 is a versatile 16-channel digital input/output interface module designed to simplify system wiring between programmable logic controllers (PLCs) and industrial field devices. Featuring a 20-pole male DIN 41651 connector, a 3-wire connection arrangement and integrated LED status indication, this module provides an organised interface for industrial automation and control applications.
As part of the WAGO 704 Series system wiring range, the 704-2054 combines a standardised pluggable system connector with multi-level field wiring terminals. Its 48-pole triple-deck field terminal arrangement and separate 6-pole power supply connection enable efficient termination of control signals and supply conductors, helping reduce wiring complexity inside electrical control cabinets.
Operating at a nominal voltage of 24 V DC, with an operating voltage tolerance of ±10%, the WAGO 704-2054 supports a maximum total current of 2 A and a limiting continuous current of 1 A. Green channel status LEDs, a yellow power supply LED and an integrated 2 A fuse provide useful monitoring and circuit protection features. Its compact 85 × 85 × 63 mm construction and DIN rail mounting design make it suitable for modern industrial control systems.
The WAGO 704-2054 digital I/O interface module provides a structured connection between compatible PLC digital input/output cards and industrial field wiring. Its 20-pole DIN 41651 system connector enables the use of suitable prefabricated cable assemblies, while the 48-pole triple-deck field terminals accommodate the three conductors associated with each of the 16 digital channels. This arrangement helps simplify sensor and actuator wiring, improve terminal accessibility and reduce installation effort.
The module also provides a dedicated 6-pole power supply connection, visual status indication and an integrated fuse. Green LEDs indicate channel status, while the yellow LED provides power supply status indication. The WAGO 704-2054 is an interface and distribution module rather than a standalone PLC input/output controller; the connected automation system performs the actual input acquisition or output control. Compatibility with a particular PLC card must be confirmed against the relevant system wiring assignment and connector pinout.
| Type of electrical connection, field-sided | Spring clamp connection |
|---|---|
| Type of electrical connection, control sided | Other |
| Height | 85 mm |
| Number of poles | 48 |
| Rated voltage | 50 V |
| Width | 85 mm |
| Rated current | 1 A |
| Pollution degree | 2 |
| Depth | 85 mm |
| Mounting method | DIN rail (top hat rail) 35 mm |
| Manufacturer | WAGO |
| Series | 704 Series |
| Model | 704-2054 |
| Product type | Interface module for system wiring |
| Module function | Digital input/output interface |
| Number of channels | 16 |
| Input/output type | Digital input or output |
| Circuit type | 3-wire connection |
| Nominal operating voltage | 24 V DC |
| Operating voltage tolerance | ±10% |
| Operating voltage range | 21.6–26.4 V DC |
| Maximum total current | 2 A |
| Limiting continuous current | 1 A |
| Status indication current consumption | 5 mA |
| Channel status indication | Green LED |
| Power supply status indication | Yellow LED |
| Internal fuse | 2 A |
| Rated surge voltage | 0.8 kV |
| System-side connector | DIN 41651 male connector |
| System-side number of poles | 20 |
| System connector mating direction | Vertical |
| Field-side connection | Triple-deck PCB terminal blocks |
| Field-side number of poles | 48 |
| Field-side terminal series | WAGO 737 Series |
| Power supply connection | Double-deck PCB terminal blocks |
| Power supply number of poles | 6 |
| Power supply terminal series | WAGO 736 Series |
| Solid conductor cross-section | 0.08–2.5 mm² |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² |
| Conductor size | 28–12 AWG |
| Conductor stripping length | 5–6 mm |
| Mounting type | DIN-35 rail |
| Housing design | Interface module in mounting carrier |
| Depth from upper edge of DIN rail | 63 mm |
| Operating temperature | −20 to +50 °C |
| Storage temperature | −40 to +70 °C |
| Relative humidity | ≤85%, non-condensing |
| Weight | 143 g |
| Country of origin | France |
| GTIN/EAN | 4050821220602 |
| RoHS compliance | Compliant without exemption |
The WAGO 704-2054 is a 16-channel digital input/output interface module used to connect compatible PLC systems to industrial field wiring. It provides a 20-pole DIN 41651 system connector, 3-wire field connections and integrated status indication.
The module supports 16 digital input or output channels, with a 3-wire field connection arrangement for each channel.
The WAGO 704-2054 operates at a nominal voltage of 24 V DC with a tolerance of ±10%, corresponding to an operating voltage range of 21.6–26.4 V DC.
The module has a maximum total current of 2 A and a limiting continuous current of 1 A. These ratings must be observed when selecting connected equipment and designing the electrical circuit.
Yes. The module includes green LEDs for channel status indication and a yellow LED for power supply status indication, supporting convenient visual inspection during operation and maintenance.
Yes. The WAGO 704-2054 includes an internal 2 A fuse. The overall installation must still incorporate any additional circuit protection required by the connected equipment and applicable electrical standards.
The module features a 20-pole male DIN 41651 connector with a vertical mating direction. It is intended for use with compatible system wiring cable assemblies and PLC interface connections.
The module provides 48 field-side terminal positions arranged in triple-deck PCB terminal blocks, together with 6 separate power supply terminal positions in double-deck terminal blocks.
The field and power supply terminals accommodate solid and fine-stranded conductors from 0.08–2.5 mm², corresponding to 28–12 AWG. The specified stripping length is 5–6 mm.
Yes. The WAGO 704-2054 is supplied in a mounting carrier designed for installation on a standard 35 mm DIN rail inside an appropriate electrical control enclosure.
The module measures 85 mm wide and 85 mm high, with a depth of 63 mm measured from the upper edge of the DIN rail.
No. Although the WAGO 704-2054 is designed for industrial PLC system wiring, compatibility depends on the PLC input/output card, cable assembly, connector pinout and electrical characteristics. The relevant manufacturer compatibility information should be checked before installation.
The module is specified for an ambient operating temperature range of −20 to +50 °C and a storage temperature range of −40 to +70 °C.
WAGO 704 Series system wiring interface modules provide practical connection solutions for industrial automation engineers, electrical panel builders and machine manufacturers. The WAGO 704-2054 combines 16-channel digital I/O connectivity, a 20-pole DIN 41651 connector, organised 3-wire field terminals, LED status indication and DIN rail mounting to simplify control cabinet wiring and support dependable industrial automation installations.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.