Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£92.44
The WAGO 704-2044 is a professional 16-channel digital input/output interface module designed to simplify electrical connections between programmable logic controllers (PLCs), industrial automation equipment and field wiring. Part of the established WAGO 704 Series, this module combines a standardised 20-pole DIN 41651 male connector, spring-clamp terminal technology and integrated disconnect/test facilities in a compact DIN rail-mounted assembly.
Designed for 24 V DC industrial control systems, the WAGO 704-2044 provides a 2-wire connection arrangement for 16 digital input or output channels. Unlike a conventional interface module, it incorporates disconnect/test terminal blocks, allowing individual circuits to be separated for testing, commissioning and troubleshooting. Integrated green channel status LEDs and a yellow power supply indicator provide convenient visual monitoring of the connected control circuits.
The module operates from a nominal 24 V DC supply with a ±10% voltage tolerance. It features an integrated 2 A fuse, a 1 A limiting continuous current and a 2 A total current rating. Its spring-clamp field terminals accommodate a range of industrial control conductors, while the supplied mounting carrier enables straightforward installation on standard 35 mm DIN rails. With a compact 99 mm mounting width, the WAGO 704-2044 provides a practical solution for organised digital I/O wiring and accessible circuit diagnostics.
The WAGO 704-2044 provides an organised interface between compatible PLC systems and individual field circuits. Its 20-pole DIN 41651 male connector allows a multi-core cable assembly to connect to the control system, while the spring-clamp field terminals provide convenient connections to external equipment. This arrangement simplifies panel wiring and helps maintain consistent signal identification across multi-channel installations.
A distinguishing feature of the WAGO 704-2044 is its integrated disconnect/test terminal arrangement. This allows individual signal paths to be opened for appropriate electrical testing and diagnostic procedures. The feature is particularly useful during equipment commissioning, maintenance and fault-finding, where technicians may need to distinguish between controller-side and field-side circuit problems. Disconnect/test facilities must be operated according to the manufacturer's instructions and applicable electrical safety procedures; they are not a substitute for a certified safety isolator.
The module also provides integrated LED status indication. Green LEDs indicate the status of individual digital channels, while a yellow LED indicates the power supply. These indicators make it easier to observe circuit activity directly at the interface, reducing the need for additional diagnostic equipment during initial visual checks. The status indication circuitry has a specified current consumption of 5 mA.
Operating at a nominal 24 V DC, the module incorporates a 2 A internal fuse and is subject to a 1 A limiting continuous current and 2 A total current. Its compact mounting carrier supports installation on a standard 35 mm DIN rail, making it suitable for industrial control cabinets, OEM machinery and automation system upgrades. The module provides wiring distribution, indication and circuit disconnection; it does not independently generate PLC input/output signals or provide programmable control functions.
| Type of electrical connection, field-sided | Spring clamp connection |
|---|---|
| Type of electrical connection, control sided | Other |
| Height | 85 mm |
| Number of poles | 20 |
| Rated voltage | 50 V |
| Width | 85 mm |
| Rated current | 1 A |
| Pollution degree | 2 |
| Depth | 99 mm |
| Mounting method | DIN rail (top hat rail) 35 mm |
| Manufacturer | WAGO |
| Series | 704 Series |
| Model | 704-2044 |
| Product type | Interface module for system wiring |
| Interface function | Digital input or output |
| Number of digital channels | 16 |
| Circuit type | 2-wire connection |
| Control-side connector | Male rectangular plug-in connector |
| Connector standard | DIN 41651 |
| Number of connector poles | 20 |
| Field-side connection | Spring-clamp terminal blocks |
| Special function | Integrated disconnect/test terminal blocks |
| Nominal operating voltage | 24 V DC |
| Operating voltage tolerance | ±10% |
| Operating voltage range | 21.6–26.4 V DC |
| Total current | 2 A |
| Limiting continuous current | 1 A |
| Internal fuse | 2 A |
| Status indication current consumption | 5 mA |
| Channel status indication | Green LED |
| Power supply indication | Yellow LED |
| Rated surge voltage | 0.8 kV |
| Conductor range | 28–12 AWG |
| Mounting type | 35 mm DIN rail |
| Module width | 99 mm |
| Module height | 85 mm |
| Module depth | 50 mm from the upper edge of the DIN rail |
| Dimensions (W × H × D) | 99 × 85 × 50 mm |
| Ambient operating temperature | −20 to +50 °C |
The WAGO 704-2044 is a 16-channel digital input/output interface module designed for industrial system wiring. It connects compatible PLC or control system cable assemblies through a 20-pole DIN 41651 male connector to field-side terminals and provides integrated disconnect/test facilities for commissioning and troubleshooting.
Both modules provide 16 digital input or output channels, a 20-pole DIN 41651 male connector, 2-wire connections and LED status indication. The key difference is that the WAGO 704-2044 includes disconnect/test terminal blocks, allowing individual signal circuits to be separated for diagnostic purposes, whereas the WAGO 704-2024 provides conventional direct wiring without this integrated disconnection function.
The WAGO 704-2044 supports 16 digital input or output channels using a 2-wire connection arrangement. Each channel has a green LED status indicator, and a separate yellow LED indicates the power supply status.
The module operates at a nominal 24 V DC with a ±10% voltage tolerance, corresponding to an operating range of 21.6–26.4 V DC. It has a 2 A total current rating, a 1 A limiting continuous current and an integrated 2 A fuse.
Yes. The WAGO 704-2044 is supplied in a mounting carrier designed for installation on a standard 35 mm DIN rail. The module has a mounting width of 99 mm and an operating temperature range of −20 to +50 °C, making it suitable for appropriately protected industrial control cabinets.
WAGO 704 Series interface modules provide organised, practical connectivity for industrial automation and PLC system wiring. The WAGO 704-2044 combines 16 digital input/output channels, integrated disconnect/test terminals, LED status indication, a standardised DIN 41651 connector and DIN rail mounting to support efficient panel construction, accessible diagnostics and straightforward maintenance in industrial control environments.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.