Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£68.98
The WAGO 704-2024 is a compact, DIN rail-mounted 16-channel digital input/output interface module designed to simplify system wiring between programmable logic controllers (PLCs), industrial automation equipment and field devices. Part of the WAGO 704 Series, this module combines a standardised 20-pole DIN 41651 male connector with double-deck terminal blocks, providing an organised interface for industrial digital signal connections.
Designed for 24 V DC control systems, the WAGO 704-2024 supports 16 digital input or output channels using a 2-wire connection arrangement. Integrated green channel status LEDs and a yellow power supply indicator provide convenient visual monitoring, helping maintenance engineers and control panel technicians identify signal activity and supply status during commissioning and troubleshooting.
The module incorporates an internal 2 A fuse, a specified 1 A limiting continuous current and a 2 A total current rating. Its field-side terminals accommodate conductors from 0.08–2.5 mm², while the integrated mounting carrier allows straightforward installation on standard 35 mm DIN rails. With overall dimensions of 85 × 85 × 50 mm, measured from the upper edge of the DIN rail for depth, the WAGO 704-2024 provides a practical interface solution for industrial control cabinets and automated machinery.
The WAGO 704-2024 is designed to provide an efficient connection between industrial PLC systems and field wiring. Its 20-pole DIN 41651 connector enables compatible multi-core cable assemblies to connect to the interface module, while the field-side terminal blocks provide organised access to individual digital input or output circuits. This arrangement helps reduce wiring complexity and supports consistent control panel construction.
One of the module's principal advantages is its integrated LED status indication. Each of the 16 digital channels has a green status indicator, while a separate yellow LED indicates the power supply status. These visual indicators assist engineers during system commissioning, signal verification and fault-finding by making relevant circuit states easier to observe directly at the interface module.
The module operates from a nominal 24 V DC supply with a tolerance of ±10%. Its internal 2 A fuse and specified current limits must be considered when designing the connected circuits. The interface provides wiring distribution and status indication; it should not be treated as an independent PLC input/output controller or as a substitute for appropriate external circuit protection.
Its WAGO 736 Series double-deck terminal blocks accommodate solid and fine-stranded conductors from 0.08–2.5 mm², allowing the module to be integrated into a variety of industrial control wiring arrangements. The 35 mm DIN rail mounting carrier simplifies mechanical installation and provides a compact, accessible interface for routine maintenance and future system modifications.
| Type of electrical connection, field-sided | Spring clamp connection |
|---|---|
| Type of electrical connection, control sided | Other |
| Height | 85 mm |
| Number of poles | 32 |
| Rated voltage | 50 V |
| Width | 85 mm |
| Rated current | 1 A |
| Pollution degree | 2 |
| Depth | 85 mm |
| Mounting method | DIN rail (top hat rail) 35 mm |
| Manufacturer | WAGO |
| Series | 704 Series |
| Model | 704-2024 |
| Product type | Interface module for system wiring |
| Interface function | Digital input or output |
| Number of digital channels | 16 |
| Circuit type | 2-wire connection |
| Control-side connector | Male plug-in connector |
| Connector standard | DIN 41651 |
| Number of connector poles | 20 |
| Field-side connection | Double-deck PCB terminal blocks |
| Terminal block series | WAGO 736 Series |
| Nominal operating voltage | 24 V DC |
| Operating voltage tolerance | ±10% |
| Operating voltage range | 21.6–26.4 V DC |
| Total current | 2 A |
| Limiting continuous current | 1 A |
| Internal fuse | 2 A |
| Status indication current consumption | 5 mA |
| Channel status indication | Green LED |
| Power supply indication | Yellow LED |
| Rated insulation voltage | 50 V |
| Rated surge voltage | 0.8 kV |
| Solid conductor cross-section | 0.08–2.5 mm² |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² |
| AWG conductor range | 28–12 AWG |
| Conductor stripping length | 5–6 mm |
| Power supply terminal arrangement | 6-pole double-deck PCB terminal block |
| Mounting type | DIN-35 rail |
| Depth from upper edge of DIN rail | 50 mm |
| Dimensions (W × H × D) | 85 × 85 × 50 mm |
| Weight | Approximately 112.3 g |
| Ambient operating temperature | −20 to +50 °C |
| Storage temperature | −40 to +70 °C |
| Relative humidity | ≤85%, non-condensing |
| Country of origin | France |
| GTIN / EAN | 4050821220657 |
| RoHS compliance | Compliant without exemption |
The WAGO 704-2024 is a 16-channel digital input/output interface module designed for industrial system wiring. It connects compatible PLC or control system cable assemblies through a 20-pole DIN 41651 male connector to field-side terminal blocks, providing organised wiring for 24 V DC automation circuits.
The WAGO 704-2024 supports 16 digital input or output channels using a 2-wire connection arrangement. Each channel has a green LED status indicator, and a separate yellow LED indicates the power supply status.
The module operates at a nominal 24 V DC with a ±10% voltage tolerance, corresponding to an operating range of 21.6–26.4 V DC. It has a 2 A total current rating, a 1 A limiting continuous current and an integrated 2 A fuse.
The WAGO 704-2024 accommodates solid and fine-stranded conductors from 0.08–2.5 mm², equivalent to 28–12 AWG. The specified conductor stripping length is 5–6 mm, and the field-side connections use double-deck WAGO 736 Series terminal blocks.
Yes. The WAGO 704-2024 is supplied in a mounting carrier designed for standard 35 mm DIN rail installation. The module measures 85 mm wide and 85 mm high, with a depth of 50 mm measured from the upper edge of the DIN rail.
WAGO 704 Series interface modules provide practical, organised connectivity for industrial automation and PLC system wiring. The WAGO 704-2024 combines 16 digital input/output channels, a standardised DIN 41651 connector, integrated LED status indication and DIN rail mounting to support efficient panel construction, accessible signal monitoring and straightforward maintenance in industrial control environments.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.