Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
£59.72
The WAGO 704-2003 is a compact and reliable 8-channel digital input/output interface module designed for efficient system wiring in industrial automation and PLC control applications. Featuring a 10-pole DIN 41651 male connector, three-conductor field connections and integrated status indication, this module provides an organised interface between compatible automation controllers and field devices. As part of the WAGO 704 Series system wiring interface modules, it is developed to simplify control cabinet wiring, improve signal identification and support dependable industrial operation.
The module incorporates WAGO's proven CAGE CLAMP® spring pressure connection technology, allowing conductors to be securely terminated without conventional screw connections. Its triple-deck PCB terminal blocks provide organised connections for eight three-wire channels, while separate supply terminals support convenient power distribution. Integrated green channel status LEDs and a yellow power supply LED provide clear visual indication, helping maintenance engineers identify signal activity and monitor the module's power supply.
Designed for a 24 V DC nominal operating supply, the WAGO 704-2003 supports a voltage tolerance of ±10%, equivalent to an operating range of 21.6–26.4 V DC. The module provides a 1 A limiting continuous current, a 2 A total current rating and an integrated 2 A fuse. Its compact 63 × 56 × 85 mm dimensions and DIN-35 rail mounting make it particularly suitable for PLC system wiring, industrial machinery and automated production equipment.
Industrial interface modules such as the WAGO 704-2003 simplify the connection between PLC input/output systems and field-mounted electrical devices. The module provides an organised wiring interface for eight digital input or output channels, allowing compatible controller signals to be connected through a 10-pole DIN 41651 system connector while individual field conductors are terminated using accessible spring-clamp terminals.
The WAGO 704 Series is designed for system wiring applications where installation efficiency, signal identification and dependable electrical connections are essential. The 704-2003 combines integrated LED status indication, internal fuse protection and a compact DIN rail mounting arrangement to support efficient maintenance and troubleshooting. Compatible WAGO system cables are available for selected WAGO-I/O-SYSTEM 753 Series modules and Siemens S7-300 applications, allowing the interface module to be incorporated into suitable industrial control architectures.
| Type of electrical connection, field-sided | Spring clamp connection |
|---|---|
| Type of electrical connection, control sided | Other |
| Height | 85 mm |
| Number of poles | 24 |
| Rated voltage | 50 V |
| Width | 56 mm |
| Rated current | 1 A |
| Pollution degree | 2 |
| Depth | 85 mm |
| Mounting method | DIN rail (top hat rail) 35 mm |
| Manufacturer | WAGO |
| Series | 704 Series System Wiring Interface Modules |
| Model | 704-2003 |
| Product type | Digital input/output interface module |
| Module function | Interface module for industrial system wiring |
| Number of channels | 8 |
| Channel type | Digital input or output |
| Circuit type | Three-conductor termination |
| System-side connector | DIN 41651 male pluggable connector |
| System connector poles | 10 |
| Connector mating direction | Vertical |
| Field-side terminal positions | 24 |
| Field-side terminal arrangement | Triple-deck PCB terminal blocks |
| Field-side terminal series | WAGO 737 Series |
| Supply terminal positions | 6 |
| Supply terminal arrangement | Two-row PCB terminal blocks |
| Supply terminal series | WAGO 736 Series |
| Connection technology | CAGE CLAMP® |
| Nominal operating voltage | 24 V DC |
| Operating voltage tolerance | ±10% |
| Operating voltage range | 21.6–26.4 V DC |
| Limiting continuous current | 1 A |
| Total current | 2 A |
| Internal fuse | 2 A |
| Channel status indication | Green LED |
| Power supply status indication | Yellow LED |
| Status indication power consumption | 5 mA |
| Rated insulation voltage | 50 V |
| Rated impulse voltage | 0.8 kV |
| Solid conductor cross-section | 0.08–2.5 mm² |
| Fine-stranded conductor cross-section | 0.08–2.5 mm² |
| Conductor size | 28–12 AWG |
| Conductor stripping length | 5–6 mm |
| Mounting type | DIN-35 rail |
| Housing design | Mounting carrier |
| Dimensions (H × W × D) | 63 × 56 × 85 mm |
| Height above DIN rail | 63 mm |
| Weight | approx. 92 g |
| Operating temperature | −20 to +50 °C |
| Storage temperature | −40 to +70 °C |
| Relative humidity | ≤85%, non-condensing |
| Country of origin | France |
| GTIN / EAN | 4050821161981 |
The WAGO 704-2003 is an industrial system wiring interface module designed to connect eight digital input or output channels between compatible PLC equipment and field devices. It uses a 10-pole DIN 41651 male connector and three-conductor field-side terminal connections.
The module operates from a nominal 24 V DC supply with a permitted voltage tolerance of ±10%, providing an operating range of 21.6–26.4 V DC.
Yes. The WAGO 704-2003 includes green LEDs for individual channel status indication and a yellow LED for power supply indication. These indicators help operators and maintenance engineers monitor signal activity and supply status.
The module has a 1 A limiting continuous current, a 2 A total current rating and an integrated 2 A internal fuse. The electrical installation must remain within the manufacturer's specified current and voltage limits.
The WAGO 704-2003 is designed for DIN-35 rail mounting inside electrical control cabinets. It features CAGE CLAMP® terminals accepting conductors from 0.08–2.5 mm² and has compact dimensions of 63 × 56 × 85 mm.
WAGO 704 Series system wiring interface modules provide industrial automation engineers, control panel builders and OEM manufacturers with dependable electrical connectivity, organised digital signal wiring and efficient DIN rail installation. The WAGO 704-2003 combines an eight-channel digital I/O interface, integrated LED status indication, CAGE CLAMP® terminals and a 10-pole DIN 41651 connector to deliver a practical solution for modern PLC and industrial control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.