Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 66.82.8.230.4003 is a 30 A Series 66 flange-mounted electromechanical power relay featuring a 230 V AC coil, two changeover contacts, silver tin oxide contact material and Faston 250 terminals for industrial electrical switching and automation applications.
The Finder 66.82.8.230.4003 is a high-performance 30 A electromechanical power relay designed for reliable electrical load switching in industrial automation, control panels and power management equipment. Part of the established Finder Series 66, this relay combines high-current switching capability with robust construction and practical flange-mounted installation.
Featuring a 230 V AC operating coil and two changeover contacts (2 CO / DPDT), the Finder 66.82.8.230.4003 provides flexible control of two independent electrical circuits. Its flange mounting and Faston 250 quick-connect terminals allow secure installation and convenient wiring in industrial machinery, heating equipment and commercial electrical systems.
With a 30 A normally open contact rating, 10 A normally closed contact rating, and silver tin oxide (AgSnO2) contacts, this relay is engineered for demanding switching applications. Reinforced coil-to-contact insulation and an operating temperature range of −40 to +70 °C further support dependable industrial operation.
The Finder 66.82.8.230.4003 operates using an electromagnetic coil that controls two changeover contact sets. When the rated 230 V AC control voltage is applied, the relay transfers its contacts from their normal positions to their energised positions. This enables two independent electrical circuits to be controlled while maintaining separation between the coil supply and the switched loads.
The Finder Series 66 is designed for demanding industrial and commercial switching duties. Its high-current silver tin oxide contact system, reinforced insulation and durable electromagnetic construction make it suitable for machinery, heating systems, power generators and electrical control equipment. The flange-mounted design with Faston terminals also supports convenient installation, servicing and replacement.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Mounting Type | Panel | |
| Manufacturer | Finder | |
| Series | 66 Series | |
| Model | 66.82.8.230.4003 | |
| Product type | Electromechanical power relay | |
| Relay family | 66.82 flange-mounted power relays | |
| Contact configuration | 2 CO (DPDT) | |
| Number of poles | 2 | |
| Nominal coil voltage | 230 V AC | |
| Coil type | AC electromagnetic coil | |
| Coil frequency | 50/60 Hz | |
| Nominal coil consumption | 3.6 VA | |
| Nominal coil resistance | 4 kΩ | |
| Nominal coil current | 15.7 mA | |
| Rated normally open contact current | 30 A | |
| Rated normally closed contact current | 10 A | |
| Maximum peak current (NO) | 120 A for 5 ms | |
| Maximum peak current (NC) | 20 A for 5 ms | |
| Rated contact voltage | 250 V AC | |
| Maximum AC switching voltage | 440 V AC | |
| Maximum DC switching voltage | 220 V DC | |
| Rated AC1 load (NO) | 7,500 VA | |
| Rated AC1 load (NC) | 2,500 VA | |
| Rated AC15 load at 230 V AC (NO) | 1,200 VA | |
| Single-phase motor rating at 230 V AC (NO) | 1.5 kW | |
| DC1 breaking capacity at 24 V DC (NO) | 25 A | |
| DC1 breaking capacity at 110 V DC (NO) | 0.7 A | |
| DC1 breaking capacity at 220 V DC (NO) | 0.3 A | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Coil-to-contact insulation | Reinforced | |
| Creepage and clearance distance | 8 mm | |
| Impulse withstand voltage | 6 kV | |
| Dielectric strength between open contacts | 1,500 V AC | |
| Operate time | 8 ms | |
| Mechanical endurance | 10 million operations | |
| Electrical endurance | 100,000 operations | |
| Operating ambient temperature | −40 to +70 °C | |
| Environmental protection category | RT II | |
| Dimensions (L × W × H) | 68.5 × 33.5 × 31 mm | |
| Mounting type | Flange / panel mounting | |
| Connection type | Faston 250 quick-connect terminals | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Number of electrical terminals | 8 | |
| Relay operation | Monostable, non-latching | |
| EAN | 8012823447681 | |
| Application category | Industrial power switching and control |
The Finder 66.82.8.230.4003 is a flange-mounted electromechanical power relay used for switching electrical loads in industrial automation, machinery, heating equipment, generators and electrical control systems.
This relay operates using a 230 V AC electromagnetic coil designed for 50/60 Hz control circuits, with a nominal coil consumption of 3.6 VA.
The relay provides 30 A normally open contacts and 10 A normally closed contacts, with a rated contact voltage of 250 V AC and a maximum switching voltage of 440 V AC. Permissible switching loads depend on the contact and load category.
DPDT means double-pole double-throw. The relay contains two changeover contact sets, allowing two separate electrical circuits to switch between normally closed and normally open connections when the coil is energised.
The relay is designed for flange or panel mounting and uses Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm, providing secure mechanical installation and convenient electrical connections.
Finder Series 66 power relays combine high-current switching capability, durable silver tin oxide contacts, reinforced electrical insulation and practical flange-mounted installation to support reliable electrical control in industrial machinery, commercial equipment and automation systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.