Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 66.82.8.120.4003 is a 30 A flange-mounted electromechanical power relay from the 66 Series, featuring a 120 V AC coil, two-pole changeover contacts and Faston 250 quick-connect terminals for industrial electrical switching and automation applications.
The Finder 66.82.8.120.4003 is a robust 30 A electromechanical power relay designed for dependable electrical load switching in industrial automation, power management and equipment control systems. As part of the established Finder 66 Series power relay range, it combines high-current switching capability with a flange-mounted construction and Faston quick-connect terminals, making it suitable for industrial machinery, electrical control assemblies and OEM equipment.
This relay features a 120 V AC operating coil and a two-pole changeover (DPDT) contact arrangement, allowing two independent electrical circuits to be switched between normally closed and normally open contact positions using a single control signal. The Finder 66 Series incorporates reinforced insulation between the coil and contacts, supporting dependable electrical separation between control and load circuits.
With a 30 A rated normally open contact current, a 10 A normally closed contact rating and a 250 V AC rated contact voltage, the Finder 66.82.8.120.4003 is suitable for industrial machinery, heating equipment, HVAC systems and automated electrical assemblies. Its flange-mounted design and Faston 250 terminals provide secure mechanical installation and convenient electrical connections.
Electromechanical power relays such as the Finder 66 Series allow lower-power electrical control signals to operate higher-current electrical loads. When the relay coil is energised, its internal electromagnetic mechanism transfers the changeover contacts from their normally closed positions to their normally open positions. When the coil is de-energised, the contacts return to their original positions, enabling controlled switching between electrical circuits.
The Finder 66.82.8.120.4003 provides a practical switching solution for industrial control panels, heating equipment and automated machinery. Its dual changeover contact arrangement offers flexibility for switching two independent circuits, while reinforced insulation, flange mounting and Faston quick-connect terminals support straightforward integration into electrical assemblies. The combination of a 120 V AC control coil and high-current normally open contacts makes this relay suitable for demanding industrial electrical switching applications.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Load Voltage | 440 V AC | |
| Manufacturer | Finder | |
| Series | 66 Series Power Relays | |
| Model | 66.82.8.120.4003 | |
| Product type | Electromechanical power relay | |
| Relay operation | Non-latching | |
| Contact configuration | 2 CO (DPDT) | |
| Number of poles | 2 | |
| Nominal coil voltage | 120 V AC | |
| Coil supply frequency | 50/60 Hz | |
| Nominal AC coil consumption | 3.6 VA at 50 Hz | |
| Nominal coil current | 30 mA | |
| Rated normally open contact current | 30 A | |
| Rated normally closed contact current | 10 A | |
| Maximum peak normally open contact current | 120 A for 5 ms with suitable contact material | |
| Maximum peak normally closed contact current | 20 A for 5 ms | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 440 V AC | |
| Rated resistive switching load (AC1) | 7500 VA (NO) / 2500 VA (NC) | |
| Rated inductive switching load (AC15, 230 V AC) | 1200 VA (NO) | |
| Single-phase motor rating (230 V AC) | 1.5 kW (NO) | |
| DC resistive breaking capacity at 24 V DC | 25 A (NO) | |
| Minimum switching load | 1000 mW | |
| Mounting type | Flange mounting | |
| Terminal type | Faston 250 quick-connect terminals | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Coil-to-contact insulation | Reinforced insulation | |
| Impulse withstand voltage | 6 kV between coil and contacts | |
| Dielectric strength between open contacts | 1500 V AC | |
| Creepage and clearance distance | 8 mm between coil and contacts | |
| Mechanical endurance | 10,000,000 cycles | |
| Electrical endurance | 100,000 cycles at specified AC1 rated load | |
| Ambient operating temperature | −40 to +70 °C | |
| Environmental protection category | RT II | |
| Overall flange mounting length | 68.5 mm |
The Finder 66.82.8.120.4003 is an electromechanical power relay designed for switching electrical loads in industrial automation, heating systems, HVAC equipment, power management and electrical control assemblies.
The relay operates using a 120 V AC nominal coil at 50/60 Hz, with a nominal AC coil consumption of 3.6 VA at 50 Hz, making it suitable for compatible AC-powered industrial control circuits.
The Finder 66.82 Series provides a 30 A rated current on normally open contacts and a 10 A rating on normally closed contacts under specified resistive load conditions. The permissible switching current depends on the electrical load characteristics, operating voltage and application requirements.
The relay features a two-pole changeover (2 CO / DPDT) contact arrangement, allowing two independent electrical circuits to be switched between normally closed and normally open contact positions when the coil is energised.
The relay is designed for flange mounting and uses Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm, enabling secure installation and convenient wiring within industrial electrical equipment and control assemblies.
Finder 66 Series power relays are designed for dependable high-current electrical switching in industrial automation, power management and equipment control applications. With robust electromagnetic construction, reinforced insulation and versatile changeover contacts, Finder relays provide practical switching solutions for electrical engineers, panel builders and OEM equipment manufacturers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.