Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 65.31.9.060.4300 is a 30 A industrial electromechanical power relay with a 60 V DC coil, one normally open contact, silver tin oxide contact material, a minimum 3 mm open-contact gap, Faston 250 terminals and rear flange mounting for industrial automation and high-current electrical switching.
The Finder 65.31.9.060.4300 is a heavy-duty 30 A industrial electromechanical power relay designed for dependable switching of high-current electrical loads. Part of the established Finder 65 Series, this model combines a 60 V DC operating coil with a single normally open contact (SPST-NO / 1 Form A).
Featuring silver tin oxide (AgSnO₂) contacts, the Finder 65.31.9.060.4300 is suitable for repeated switching of compatible industrial loads. Its 30 A rated contact current, 250 V AC rated contact voltage and 7,500 VA AC1 resistive switching capacity make it a practical choice for machinery, heating equipment, industrial automation and electrical power control.
The relay also features a minimum 3 mm open-contact gap, providing increased physical separation when the contact is open. Its Faston 250 quick-connect terminals and rear flange mounting arrangement support straightforward installation in compatible industrial electrical equipment.
The Finder 65.31.9.060.4300 operates as an electrically controlled power switch. When its 60 V DC coil is energised, the relay closes its normally open contact, allowing current to flow through the connected load circuit. When coil power is removed, the contact returns to its open position.
Its single-pole normally open contact arrangement is particularly suitable for applications requiring one substantial electrical load to be controlled by a separate DC signal. Unlike Finder 65 Series variants with one normally open and one normally closed contact, this model provides one normally open switching circuit rated at 30 A.
The silver tin oxide contact material supports repeated switching within the manufacturer's specified ratings. The minimum 3 mm open-contact gap provides increased physical separation when the relay is de-energised. The complete installation must nevertheless meet the relevant electrical safety and isolation requirements.
For installation, the rear flange mounting arrangement allows secure attachment to a suitable panel or chassis, while Faston 250 terminals enable convenient connections using compatible receptacles. Its 60 V DC coil makes this relay particularly useful in industrial equipment designed around that nominal control voltage.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Switching Current (A) | 30 A | |
| Load Voltage | 400 V AC | |
| Mounting Type | Panel | |
| Manufacturer | Finder | |
| Series | 65 Series Power Relays | |
| Model | 65.31.9.060.4300 | |
| Product type | Industrial electromechanical power relay | |
| Contact configuration | SPST-NO / 1 Form A | |
| Number of poles | 1 | |
| Normally open contacts | 1 | |
| Rated contact current | 30 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated resistive load (AC1) | 7,500 VA | |
| Rated inductive load (AC15 at 230 V AC) | 1,250 VA | |
| Single-phase motor rating at 230 V AC | 1.5 kW | |
| DC1 breaking capacity at 24 V DC | 30 A | |
| DC1 breaking capacity at 110 V DC | 1.1 A | |
| DC1 breaking capacity at 220 V DC | 0.7 A | |
| Nominal coil voltage | 60 V DC | |
| Coil type | DC, non-latching | |
| Nominal coil consumption | 1.3 W | |
| Nominal coil current | Approximately 21.7 mA | |
| Nominal coil resistance | Approximately 2,760 Ω | |
| Indicative DC coil operating range | 51 to 66 V DC under specified reference conditions | |
| Contact material | Silver tin oxide (AgSnO₂) | |
| Open-contact gap | At least 3 mm | |
| Mounting type | Chassis / panel mounting | |
| Mounting arrangement | Rear flange | |
| Terminal type | Faston 250 quick-connect | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Number of electrical terminals | 4 | |
| Approximate overall dimensions | 36.5 × 32.2 × 59.2 mm | |
| Operating temperature | −40 to +75 °C | |
| Mechanical endurance | 30 million operations for DC coil versions | |
| Electrical endurance | 30,000 operations at the specified rated AC1 load | |
| Operating time | Approximately 15 ms | |
| Release time | Approximately 4 ms | |
| Coil-to-contact impulse withstand voltage | 4 kV | |
| Environmental protection category | RT I | |
| Application | Industrial automation, high-current switching and electrical control systems |
The Finder 65.31.9.060.4300 is a 30 A industrial power relay used for switching electrical loads in machinery, automation systems and control panels. It operates a single normally open contact using a 60 V DC coil.
The relay has a 60 V DC nominal coil voltage. Its nominal coil consumption is 1.3 W, corresponding to a nominal coil current of approximately 21.7 mA.
The Finder 65 Series DC coil operating range is typically 85% to 110% of nominal voltage. For a 60 V DC coil, this corresponds to approximately 51 to 66 V DC under reference conditions. Check the manufacturer's data for temperature-dependent limits.
The Finder 65.31.9.060.4300 has a 30 A rated contact current at 250 V AC, with a rated resistive switching capacity of 7,500 VA. Actual permissible loads depend on the switching category, voltage and operating conditions.
The relay has one normally open contact (SPST-NO / 1 Form A). The contact closes when the coil is energised and opens when coil power is removed. It does not provide a normally closed or changeover contact.
The relay features a minimum 3 mm gap between its open contacts. This provides increased physical separation when the relay is de-energised. Any required electrical isolation function must be assessed against the applicable equipment and safety standards.
The relay uses a rear flange mounting arrangement for installation on a compatible panel or chassis. Electrical connections use Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm.
The relay uses silver tin oxide (AgSnO₂) contacts. This cadmium-free contact material is designed for dependable switching of compatible industrial electrical loads.
The Finder 65.31-4300 DC coil range has a specified mechanical endurance of 30 million operations and an electrical endurance of 30,000 operations at the specified rated AC1 load. Actual service life depends on electrical loading, switching frequency and environmental conditions.
The main difference is the contact arrangement and current rating. The 65.31.9.060.4300 has one normally open contact rated at 30 A, while the 65.31.9.060.4000 has one normally open and one normally closed contact rated at 20 A. Both use a 60 V DC coil, but their switching functions and contact ratings differ.
Yes. The relay can switch compatible DC loads. The Finder 65.31-4300 specification includes resistive DC1 breaking capacities of 30 A at 24 V DC, 1.1 A at 110 V DC and 0.7 A at 220 V DC. Higher-voltage or inductive DC applications require careful assessment against the manufacturer's switching characteristics.
Finder 65 Series power relays are designed for demanding industrial automation, machinery and electrical control applications. The Finder 65.31.9.060.4300 combines a 30 A contact rating, 60 V DC operating coil, single normally open contact, silver tin oxide contact material, minimum 3 mm contact gap, Faston 250 terminals and rear flange mounting to provide a dependable high-current switching solution for compatible industrial equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.