Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 65.31.9.060.4000 is a 20 A industrial electromechanical power relay with a 60 V DC coil, one normally open and one normally closed contact, silver tin oxide contact material, Faston 250 terminals and rear flange mounting for industrial automation and electrical control applications.
The Finder 65.31.9.060.4000 is a heavy-duty 20 A industrial electromechanical power relay designed for dependable electrical switching in machinery, automation systems and industrial control panels. Part of the Finder 65 Series, this model combines a 60 V DC operating coil with one normally open and one normally closed contact (1 NO + 1 NC).
The relay features silver tin oxide (AgSnO₂) contacts for repeated switching of compatible electrical loads. Its 20 A rated contact current, 250 V AC rated contact voltage and 5,000 VA AC1 resistive switching capacity make it suitable for a range of industrial load-control applications.
With two independently wired contacts, the Finder 65.31.9.060.4000 provides complementary switching functions: energising the 60 V DC coil closes the normally open contact and opens the normally closed contact. The Faston 250 quick-connect terminals and rear flange mounting arrangement support practical installation in compatible industrial equipment.
The Finder 65.31.9.060.4000 functions as an electrically controlled switching device. When its 60 V DC coil is energised, the normally open contact closes and the normally closed contact opens. When the coil supply is removed, both contacts return to their original positions.
This 1 NO + 1 NC arrangement is useful where one circuit needs to be activated while another is disconnected. Typical examples include auxiliary equipment control, electrical signalling, machinery control and complementary switching functions. Unlike a conventional changeover relay, the two contacts are independently wired rather than sharing a common terminal.
The relay's AgSnO₂ contact material is designed for repeated switching of compatible industrial loads. Its 20 A contact rating and 5,000 VA AC1 resistive switching capacity provide a useful combination for appropriately rated power-control circuits. The permissible switching current must always be checked against the actual load type, voltage and operating conditions.
The Faston 250 terminals allow connections using compatible quick-connect receptacles, while the rear flange mounting arrangement supports secure installation on a suitable chassis or panel. The 60 V DC coil makes this variant relevant to equipment specifically designed around a nominal 60 V DC control supply.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Switching Current (A) | 20 A | |
| Load Voltage | 400 V AC | |
| Mounting Type | Panel | |
| Manufacturer | Finder | |
| Series | 65 Series Power Relays | |
| Model | 65.31.9.060.4000 | |
| Product type | Industrial electromechanical power relay | |
| Contact configuration | 1 NO + 1 NC | |
| Normally open contacts | 1 | |
| Normally closed contacts | 1 | |
| Contact arrangement | Two independently wired single-throw contacts | |
| Rated contact current | 20 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated resistive load (AC1) | 5,000 VA | |
| Nominal coil voltage | 60 V DC | |
| Coil type | DC, non-latching | |
| Nominal coil consumption | 1.3 W | |
| Calculated nominal coil current | Approximately 21.7 mA | |
| Calculated nominal coil resistance | Approximately 2,770 Ω | |
| Indicative coil operating voltage range | 51 to 66 V DC, based on an 85–110% nominal-voltage range; verify against the exact coil data | |
| Contact material | Silver tin oxide (AgSnO₂) | |
| Mounting type | Chassis / panel mounting | |
| Mounting arrangement | Rear flange | |
| Terminal type | Faston 250 quick-connect | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Number of electrical terminals | 6 | |
| Switching operation | Monostable electromechanical | |
| Application | Industrial automation, electrical control and load switching |
The Finder 65.31.9.060.4000 is a 20 A industrial power relay used for switching electrical loads in machinery, automation systems and control panels. It operates one normally open and one normally closed contact using a 60 V DC coil.
The relay has a 60 V DC nominal coil voltage. Based on a nominal coil consumption of 1.3 W, its calculated coil current is approximately 21.7 mA.
An indicative range based on 85–110% of nominal voltage is 51 to 66 V DC. The precise permitted operating range should be confirmed using the manufacturer's coil data for this model, particularly where ambient temperature varies.
The Finder 65.31.9.060.4000 has a 20 A rated contact current at 250 V AC, with a rated resistive switching capacity of 5,000 VA. The permissible switching load depends on the electrical characteristics and applicable utilisation category.
The relay has two separate contacts: one normally open (NO) and one normally closed (NC). Energising the coil closes the NO contact and opens the NC contact. Both return to their normal states when coil power is removed.
No. The relay provides two independently wired single-throw contacts, one normally open and one normally closed. A conventional changeover contact shares a common terminal, whereas this model provides two separate switching circuits.
The relay uses a rear flange mounting arrangement for installation on a compatible panel or chassis. Electrical connections use Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm.
The Finder 65.31.9.060.4000 uses silver tin oxide (AgSnO₂) contacts. This cadmium-free contact material is designed for repeated switching of compatible industrial electrical loads.
Not as a direct substitution without checking the control circuit. The 65.31.9.060.4000 has a 60 V DC coil, while a 48 V DC version is designed for a different nominal supply. Contact configuration, terminal layout, mounting and electrical ratings must also be checked before replacement.
Yes, the relay can switch compatible DC loads, but the permissible current depends on DC voltage and load characteristics. Higher-voltage or inductive DC loads can be substantially more demanding than resistive AC loads. Consult the manufacturer's DC breaking-capacity information before selecting the relay for a particular DC circuit.
Yes. This is a non-latching relay, so the coil must remain energised to hold the normally open contact closed and the normally closed contact open. When the coil supply is removed, the contacts return to their normal states.
Finder 65 Series power relays are designed for industrial automation, machinery and electrical control applications. The Finder 65.31.9.060.4000 combines a 20 A contact rating, 60 V DC operating coil, one normally open and one normally closed contact, silver tin oxide contact material, Faston 250 terminals and rear flange mounting to provide a versatile switching solution for compatible industrial equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.