Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 65.31.9.012.4309 is an industrial electromagnetic power relay featuring a 12 V DC operating coil and one normally open contact for dependable electrical load switching in automation, machinery and industrial control equipment.
The Finder 65.31.9.012.4309 is a heavy-duty electromagnetic power relay from the established Finder 65 Series, designed for dependable electrical load switching in industrial automation, machinery control and electrical equipment. Featuring a 12 V DC operating coil and a single normally open contact (1 NO / SPST-NO), this relay provides a practical switching interface between low-voltage control circuits and electrical loads.
The Finder 65 Series is designed for power-switching applications where robust electromechanical construction and reliable contact operation are important. The 65.31 configuration provides a normally open switching contact that closes when the operating coil is energised and returns to its open position when the coil supply is removed. This operating principle makes the relay suitable for auxiliary control, electrical load switching and machinery automation.
The 65.31.9.012.4309 combines a 12 V DC coil with a single-pole switching arrangement, allowing compatible electronic controllers, automation equipment and DC control circuits to operate an electrically separate load circuit. Its industrial relay construction makes it suitable for integration into appropriately designed OEM equipment, electrical control panels and machinery assemblies.
The Finder 65.31.9.012.4309 provides an effective interface between 12 V DC control circuits and industrial electrical loads. When the operating coil is energised, the relay's electromagnetic mechanism closes the normally open contact, allowing the connected load circuit to operate. Removing the coil supply causes the contact to return to its normally open position.
The single-pole normally open configuration is particularly useful where an electrical load must remain disconnected until an intentional control signal is received. This switching arrangement supports auxiliary load control, machinery sequencing, industrial signalling and equipment automation. It also allows a suitably rated control device to command a separate electrical circuit without directly carrying the switched load current.
For dependable operation, the relay must be installed and used within the manufacturer's applicable electrical and environmental ratings. The connected load current, switching voltage, load characteristics and protective devices should be assessed carefully, particularly where inductive equipment, motors or high-inrush loads are involved. The precise contact ratings, terminal arrangement and mounting requirements should be confirmed against Finder's technical documentation for the 65.31.9.012.4309 variant.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Manufacturer | Finder | |
| Product series | 65 Series | |
| Manufacturer part number | 65.31.9.012.4309 | |
| Product category | Industrial power relay | |
| Relay technology | Electromagnetic / electromechanical | |
| Relay type | Monostable power relay | |
| Nominal coil voltage | 12 V DC | |
| Coil supply type | DC | |
| Contact configuration | 1 NO / SPST-NO | |
| Number of poles | 1 | |
| Number of normally open contacts | 1 | |
| Contact resting state | Normally open | |
| Contact state when energised | Closed | |
| Operating principle | Electromagnetic coil-actuated switching | |
| Switching behaviour | Monostable / non-latching | |
| Control-to-load interface | Electromechanically operated contact | |
| Application category | Industrial electrical switching and control | |
| Typical equipment | Industrial control panels, machinery and OEM electrical assemblies |
The Finder 65.31.9.012.4309 is an industrial electromagnetic power relay designed for switching electrical loads in automation, machinery control, auxiliary circuits and industrial electrical equipment.
This relay features a 12 V DC nominal operating coil and should be connected to a compatible DC control supply.
The relay features one normally open contact (1 NO / SPST-NO). The contact closes when the operating coil is energised and returns to its open position when the coil is de-energised.
No. The Finder 65.31.9.012.4309 uses a monostable electromagnetic switching mechanism, meaning the contact returns to its normally open state when the coil supply is removed.
Yes. The relay has a 12 V DC operating coil and can be controlled by a compatible DC automation system, provided the controller output can supply the required coil current and the installation meets the manufacturer's specifications.
Before installation, confirm the 12 V DC coil supply, normally open contact arrangement, permissible switching current and voltage, load characteristics, terminal connections, mounting requirements and appropriate circuit protection.
Finder 65 Series power relays provide robust electromechanical switching solutions for industrial machinery, automation equipment and electrical control systems, combining practical contact arrangements with reliable operating principles for suitably rated electrical loads.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.