Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
65.31.9.006.0000 Finder Power relay 1NO1 NC 20A DC 6V
Finder 65.31.9.006.0000 is a 20 A electromechanical power relay with a 6 V DC coil, one normally open and one normally closed AgCdO contact, a rear mounting flange and Faston 250 terminals.
Why Choose the Finder 65.31.9.006.0000 Power Relay?
The Finder 65.31.9.006.0000 is a heavy-duty electromechanical power relay designed for dependable switching in industrial machinery, automation equipment and electrical control systems. Part of the established Finder 65 Series, it combines a low-voltage 6 V DC coil with one normally open and one normally closed contact rated at 20 A.
This relay uses silver cadmium oxide contacts to provide reliable electrical switching under demanding operating conditions. Its complementary contact arrangement allows one circuit to close while the other opens when the coil is energised, making the relay suitable for control, interlocking and change-of-state functions.
The 65.31.9.006.0000 features a rear mounting flange and Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm. Its low-voltage DC coil enables straightforward integration with suitable electronic controllers, power supplies and automation systems.
Key Advantages
- Heavy-duty electromechanical relay for industrial power switching.
- One normally open and one normally closed contact for flexible control.
- 20 A nominal contact rating for demanding electrical loads.
- 6 V DC coil suitable for low-voltage control circuits.
- Silver cadmium oxide contacts support dependable switching performance.
- Rear mounting flange and Faston terminals simplify panel installation.
Key Features
- Finder 65 Series power relay.
- 1 NO + 1 NC contact configuration.
- 20 A nominal contact current.
- 6 V DC rated coil voltage.
- 5,000 VA maximum AC1 switching capacity.
- Silver cadmium oxide (AgCdO) contact material.
- Faston 250 terminals measuring 6.3 × 0.8 mm.
- Monostable, non-polarised operating mechanism.
Reliable Power Switching for Industrial Equipment
Electromechanical power relays allow a low-voltage control circuit to operate a separate, higher-current electrical load. When 6 V DC is applied to the coil, the normally open contact closes and the normally closed contact opens, providing two complementary switching states from one control signal.
The Finder 65 Series is designed for industrial applications where reliable power switching, electrical isolation and convenient panel installation are required. The low-voltage coil, high-current contacts and Faston connections make this relay suitable for integration with controllers and automation equipment.
Typical Applications
- Industrial machinery and automation systems.
- Low-voltage electronic control circuits.
- Pump and motor control panels.
- Heating, ventilation and refrigeration equipment.
- Power distribution and electrical control cabinets.
- Battery-powered and DC control systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Mounting Type | Panel | |
| Load Voltage | 400 V AC | |
| Coil / Supply Voltage | 6 V DC | |
| Contacts | 2NO + 2NC | |
| HS Code | 85364900 | |
| Manufacturer | Finder | |
| Series | 65 Series | |
| Model | 65.31.9.006.0000 | |
| Product type | Electromechanical power relay | |
| Contact configuration | 1 normally open + 1 normally closed (1 NO + 1 NC) | |
| Nominal contact current | 20 A | |
| Maximum instantaneous current | 120 A for 5 ms | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC / 220 V DC | |
| Resistive DC contact rating | 20 A at 24 V DC | |
| Maximum AC1 switching capacity | 5,000 VA | |
| AC15 switching capacity | 1,000 VA at 230 V AC | |
| Rated coil voltage | 6 V DC | |
| Coil operating range | 5.1–6.6 V DC | |
| Coil current | 214 mA | |
| Coil resistance | 28 Ω | |
| Coil power consumption | 1.3 W | |
| Contact material | Silver cadmium oxide (AgCdO) | |
| Terminal type | Faston 250 quick-connect terminals | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Mounting type | Panel mounting with rear fixing flange | |
| Coil-to-contact insulation | 8 mm clearance and creepage distance | |
| Impulse withstand voltage | 6 kV between coil and contacts | |
| Protection category | RT I | |
| Operating temperature | -40 to +75 °C | |
| Dimensions (H × W × D) | approximately 57.2 × 32.2 × 36.5 mm | |
| Weight | approximately 69 g |
Frequently Asked Questions
What is the Finder 65.31.9.006.0000 used for?
This power relay allows a 6 V DC control circuit to switch higher-current loads in industrial machinery, automation equipment and electrical control panels.
What coil voltage does this relay require?
The Finder 65.31.9.006.0000 has a 6 V DC coil with a specified operating range of 5.1–6.6 V DC.
What contact configuration does this relay provide?
The relay provides one normally open and one normally closed contact, allowing complementary switching from a single coil signal.
What is the contact rating of this relay?
The contacts have a nominal current rating of 20 A at 250 V AC, with a maximum AC1 switching capacity of 5,000 VA.
How is the Finder 65.31.9.006.0000 installed?
The relay is panel mounted using its rear fixing flange and connected through 6.3 × 0.8 mm Faston 250 terminals.
Trusted Industrial Switching from Finder
Finder 65 Series power relays are used throughout industrial control and automation equipment where reliable high-current switching, flexible contact arrangements and secure panel installation are required.
