65.31.8.400.4300 Finder Power relay 1NO 30A 400VNO

65.31.8.400.4300 Finder Power relay 1NO 30A 400VNO

Finder 65.31.8.400.4300 industrial electromechanical power relay featuring a 400 V AC operating coil, one 30 A normally open contact with a minimum 3 mm contact gap, rear flange mounting and Faston 250 terminals for industrial electrical switching.

SKU: 65.31.8.400.4300Alt SKU: 653184004300MPN: 65.31.8.400.4300
Price on application Contact us for pricing and availability.
Call 01708 343600

Why Choose the Finder 65.31.8.400.4300 Industrial Power Relay?

The Finder 65.31.8.400.4300 is a high-current 30 A industrial electromechanical power relay designed for reliable electrical switching in industrial automation, machinery control, heating equipment and power distribution applications. Part of the established Finder 65 Series, this model combines a high-voltage AC operating coil with a normally open power contact for dependable control of electrical loads.

Featuring a 400 V AC nominal operating coil and a single normally open contact (1 NO / SPST-NO), the relay enables electrical equipment to be switched through a separate control circuit. The 65.31-4300 contact arrangement provides a contact opening of at least 3 mm, supporting applications where increased separation between open contacts is required.

With a 30 A rated contact current, 250 V AC rated contact voltage and 7,500 VA AC-1 resistive switching capacity, the Finder 65.31.8.400.4300 offers substantial switching capability for appropriately rated industrial loads. Its rear flange-mounted construction and Faston 250 quick-connect terminals make it suitable for integration into electrical control panels, industrial machinery and OEM equipment.

Key Advantages

  • 30 A rated contact current supports demanding industrial switching applications.
  • 400 V AC nominal operating coil suitable for appropriately rated industrial AC control circuits.
  • Single normally open contact (1 NO / SPST-NO) provides straightforward electrical load switching.
  • Minimum 3 mm open-contact gap provides increased separation when the relay is de-energised.
  • 7,500 VA AC-1 resistive switching capacity supports suitable high-current electrical loads.
  • 250 V AC rated contact voltage for industrial power switching.
  • 400 V AC maximum switching voltage, subject to the specified insulation and installation conditions.
  • Rear flange mounting enables secure installation in industrial equipment.
  • Faston 250 quick-connect terminals simplify wiring and servicing.
  • Monostable operation automatically opens the contact when the operating coil is de-energised.
  • Part of the established Finder 65 Series of industrial power relays.

Key Features

  • Finder 65 Series industrial power relay.
  • 65.31 relay type with flange mounting and Faston terminals.
  • 400 V AC nominal coil voltage.
  • 50/60 Hz AC coil operation.
  • One normally open contact (1 NO / SPST-NO).
  • 30 A rated contact current.
  • 250 V AC rated contact voltage.
  • 400 V AC maximum switching voltage.
  • 7,500 VA rated resistive switching load (AC-1).
  • 1,250 VA AC-15 switching capacity at 230 V AC.
  • 1.5 kW single-phase motor rating at 230 V AC.
  • Minimum 3 mm contact opening.
  • 2.2 VA nominal AC coil consumption.
  • Faston 250 terminals measuring 6.3 × 0.8 mm.
  • Electromechanical monostable switching mechanism.
  • Designed for industrial electrical switching, machinery and power control applications.

High-Current Switching for Industrial Electrical Control

The Finder 65.31.8.400.4300 provides an effective interface between a 400 V AC control circuit and an electrical load. When the relay coil is energised, its normally open contact closes, allowing current to flow through the connected circuit. When the coil is de-energised, the contact returns to its open position and interrupts the switched load.

The Finder 65 Series is designed for applications requiring greater switching capacity than conventional low-current interface relays. The 65.31.8.400.4300 offers a 30 A contact rating and 7,500 VA AC-1 resistive switching capacity, making it suitable for appropriately rated industrial heating equipment, electrical distribution assemblies, industrial appliances and machinery control systems.

The relay's minimum 3 mm contact gap provides increased separation between open contacts, while its rear flange mounting and Faston 250 connections support practical installation. For motor loads, inductive equipment and other demanding applications, engineers should select the relay according to the appropriate utilisation category, starting current, switching frequency and protective requirements. The 400 V AC coil rating describes the operating supply and should not be confused with the relay's contact load ratings.

Typical Applications

  • Industrial heating equipment and resistive load switching.
  • Electrical distribution cabinets and power control assemblies.
  • Industrial machinery using 400 V AC control circuits.
  • Burner, boiler and industrial oven control systems.
  • Commercial and industrial appliance control.
  • Industrial washing machines and laundry equipment.
  • Backup generators and auxiliary electrical control circuits.
  • Single-phase motor switching within the specified motor rating.
  • Heating, ventilation and air conditioning equipment.
  • Industrial process control and electrical load management.
  • OEM machinery and high-current electrical assemblies.

Technical Specifications

Tick the specs you need, then view products that match.

Device Type Power Relay
Terminal Type Faston / flat-pin
Load Voltage 400 V AC
Mounting Type Panel
Switching Current (A) 30 A
Manufacturer Finder
Series 65 Series Power Relays
Model 65.31.8.400.4300
Product type Industrial electromechanical power relay
Relay family 65.31
Nominal coil voltage 400 V AC
Coil supply type AC
Coil frequency 50/60 Hz
AC coil operating voltage range 320–440 V AC
Rated AC coil consumption 2.2 VA
Nominal coil current Approximately 6 mA
Coil resistance 19.8 kΩ
Contact configuration 1 NO / SPST-NO
Number of poles 1
Rated contact current 30 A
Rated contact voltage 250 V AC
Maximum switching voltage 400 V AC
Rated resistive load (AC-1) 7,500 VA
Rated AC-15 load at 230 V AC 1,250 VA
Single-phase motor rating at 230 V AC 1.5 kW
DC-1 switching capacity at 24 V DC 30 A
Minimum switching load 1,000 mW
Minimum open-contact gap 3 mm
Coil-to-contact impulse withstand voltage 4 kV
Dielectric strength between open contacts 2,500 V AC
Relay operation Monostable / non-latching
Mounting type Rear flange / panel mounting
Terminal type Faston 250 quick-connect
Terminal dimensions 6.3 × 0.8 mm
Environmental protection category RT I
Application category Industrial power switching and electrical control

Frequently Asked Questions

What is the Finder 65.31.8.400.4300 used for?

The Finder 65.31.8.400.4300 is an industrial electromechanical power relay designed for switching electrical loads in heating equipment, industrial machinery, electrical distribution assemblies and automation systems using appropriately rated control circuits.

What coil voltage does the Finder 65.31.8.400.4300 require?

The relay requires a 400 V AC nominal coil supply operating at 50/60 Hz. Its specified AC coil operating voltage range is 320–440 V AC, with a nominal coil consumption of 2.2 VA.

What contact configuration does the Finder 65.31.8.400.4300 provide?

The relay features one normally open contact (1 NO / SPST-NO) with a minimum 3 mm contact gap. The contact closes when the coil is energised and opens when the coil is de-energised.

What is the switching capacity of the Finder 65.31.8.400.4300?

The relay's 65.31-4300 contact arrangement provides a 30 A rated contact current, 250 V AC rated contact voltage and 7,500 VA AC-1 resistive switching capacity. The applicable load rating depends on the electrical characteristics of the connected equipment and its utilisation category.

How is the Finder 65.31.8.400.4300 mounted and connected?

The Finder 65.31.8.400.4300 uses rear flange mounting for secure installation and Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm for electrical connections. These features support integration into industrial control panels and machinery assemblies.

Trusted by Industrial Automation and Electrical Control Professionals

Finder 65 Series power relays are designed for demanding industrial electrical switching applications where substantial contact capacity, dependable operation and practical installation are essential. Combining a 400 V AC operating coil, 30 A normally open contact arrangement, increased contact separation and Faston electrical connections, the Finder 65.31.8.400.4300 offers a practical solution for electrical engineers, control panel manufacturers, OEM machine builders and industrial maintenance professionals.