Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.83.9.220.4000 Finder Power relay 3 pole 16A DC 220V
Finder 62.83.9.220.4000 is a 16 A three-pole changeover industrial power relay with a 220 V DC coil, silver tin oxide contacts, rear flange mounting and Faston 250 terminals for dependable electrical switching in industrial automation and machinery control.
£19.10
Why Choose the Finder 62.83.9.220.4000 Power Relay?
The Finder 62.83.9.220.4000 is a robust 16 A industrial power relay with a 220 V DC coil and three changeover contacts, designed for dependable electrical switching in industrial automation, machinery and electrical control systems. Part of the established Finder 62 Series, this electromechanical relay offers a practical solution for controlling multiple electrical circuits from a single DC control signal.
Featuring a three-pole double-throw (3PDT / 3 CO) contact configuration, the relay enables three independent circuits to change switching state simultaneously. Its 16 A rated contacts and 250 V AC rated contact voltage support a range of industrial switching applications, including auxiliary control, electrical interlocking and machinery automation.
The Finder 62.83.9.220.4000 combines a 220 V DC operating coil with rear flange mounting and Faston 250 quick-connect terminals. Its standard electromechanical construction provides electrical separation between the control coil and switched circuits, while its panel-mounting design supports straightforward integration into suitable industrial equipment.
Key Advantages
- 16 A industrial power relay suitable for machinery, automation and electrical control applications.
- 220 V DC operating coil for compatible industrial DC control systems.
- Three changeover contacts (3PDT / 3 CO) enable simultaneous switching of three independent circuits.
- 250 V AC rated contact voltage supports suitable industrial electrical loads.
- Versatile changeover switching provides normally open and normally closed connections for each pole.
- Rear flange mounting enables secure installation on suitable equipment panels and mounting surfaces.
- Faston 250 quick-connect terminals support convenient wiring, servicing and replacement.
- Non-latching electromechanical operation automatically returns contacts to their normal positions when coil power is removed.
- Reinforced coil-to-contact insulation supports electrical separation between control and load circuits.
- Part of the established Finder 62 Series industrial relay range.
Key Features
- Finder 62 Series industrial power relay.
- 220 V DC nominal coil voltage.
- DC-operated electromagnetic coil.
- 16 A rated contact current.
- Three-pole double-throw (3PDT) configuration.
- Three changeover contacts (3 CO).
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 4,000 VA rated resistive switching load (AC1).
- Silver tin oxide (AgSnO2) contact material.
- Approximately 1.3 W nominal DC coil consumption.
- Non-latching electromagnetic switching mechanism.
- Standard 4000 configuration without a lockable test button.
- Rear flange / panel mounting.
- Faston 250 quick-connect terminals.
- 6.3 × 0.8 mm terminal dimensions.
- Reinforced insulation between coil and contacts.
- Suitable for industrial automation, machinery and electrical control equipment.
Reliable Electrical Switching for Industrial Automation
The Finder 62.83.9.220.4000 provides dependable control of multiple electrical circuits using a separate 220 V DC control signal. When the relay coil is energised, its electromagnetic mechanism operates three changeover contacts, transferring each circuit from its normally closed connection to its normally open connection. When the coil is de-energised, the contacts return to their original positions.
The relay's three-pole changeover arrangement is particularly useful for applications requiring several switching functions from one control input. Typical duties include electrical interlocking, machinery signalling, auxiliary contactor control and industrial equipment automation. The 220 V DC coil makes this model suitable for compatible higher-voltage DC control systems, including appropriately designed industrial control and power distribution equipment.
Its rear flange mounting arrangement supports secure installation within machinery and control cabinets, while Faston 250 terminals provide accessible electrical connections. The 16 A rated contacts support a range of industrial switching duties, provided the connected loads remain within the manufacturer's applicable ratings. Particular attention should be given to load type, switching frequency and contact protection when controlling inductive or DC loads.
Typical Applications
- Industrial automation and machinery control panels.
- 220 V DC industrial control and signalling circuits.
- Power distribution and electrical control equipment.
- Industrial machinery and automated production systems.
- Auxiliary contactor and motor control circuits.
- Electrical interlocking and three-circuit changeover functions.
- Industrial process control and monitoring equipment.
- Control cabinets with compatible high-voltage DC supplies.
- Building management and facility automation systems.
- Industrial heating, ventilation and air conditioning controls.
- OEM machinery and industrial electrical equipment manufacturing.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Switching Current (A) | 16 A | |
| Load Voltage | 400 V AC | |
| Mounting Type | Panel | |
| Manufacturer | Finder | |
| Series | 62 Series Power Relays | |
| Manufacturer part number | 62.83.9.220.4000 | |
| Product type | Industrial electromechanical power relay | |
| Contact configuration | 3PDT / 3 CO | |
| Number of poles | 3 | |
| Number of changeover contacts | 3 | |
| Rated contact current | 16 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated resistive switching load (AC1) | 4,000 VA | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Nominal coil voltage | 220 V DC | |
| Coil supply type | DC | |
| Nominal DC coil consumption | Approximately 1.3 W | |
| Calculated nominal coil current | Approximately 5.9 mA | |
| Calculated nominal coil resistance | Approximately 37.2 kΩ | |
| Coil operating principle | Electromagnetic, non-latching | |
| Contact switching action | Electromechanical changeover | |
| Mounting type | Rear flange / panel mounting | |
| Terminal type | Faston 250 quick-connect | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Coil-to-contact insulation | Reinforced insulation | |
| Contact position at rest | Common connected to normally closed terminal | |
| Contact position when energised | Common connected to normally open terminal |
Frequently Asked Questions
What is the Finder 62.83.9.220.4000 used for?
The Finder 62.83.9.220.4000 is a 16 A industrial power relay used to switch electrical circuits in machinery, automation equipment and control panels. Its three changeover contacts allow three independent circuits to be controlled using a single 220 V DC coil.
What coil voltage does the Finder 62.83.9.220.4000 require?
The relay uses a 220 V DC nominal coil. Its nominal DC coil consumption is approximately 1.3 W, corresponding to a calculated nominal current of approximately 5.9 mA. The control supply must be suitable for the relay's rated DC coil voltage.
What is the contact configuration of the Finder 62.83.9.220.4000?
The relay features three changeover contacts (3PDT / 3 CO). Each contact has a common terminal, a normally closed terminal and a normally open terminal, allowing three independent circuits to change switching state when the coil is energised.
What is the contact rating of the Finder 62.83.9.220.4000?
The relay has a 16 A rated contact current and a 250 V AC rated contact voltage, with a maximum switching voltage of 400 V AC. Its rated resistive switching load is 4,000 VA (AC1). The permissible switching current depends on the load type and operating conditions, and DC load ratings must be checked separately.
How is the Finder 62.83.9.220.4000 installed?
The Finder 62.83.9.220.4000 uses a rear flange / panel mounting arrangement and Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm. It is intended for secure installation on suitable equipment panels or mounting surfaces rather than conventional plug-in relay socket mounting.
Trusted by Industrial Automation and Electrical Engineers
Finder 62 Series power relays provide dependable electromechanical switching solutions for automation engineers, machinery builders and electrical maintenance professionals. The Finder 62.83.9.220.4000 combines a 220 V DC coil, three 16 A changeover contacts, silver tin oxide contact material, rear flange mounting and Faston 250 terminals, making it a practical choice for industrial control and electrical switching applications.
