Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.82.9.024.0300 Finder Power relay 2pole 16A DC 24VNO
Finder 62.82.9.024.0300 is a 16 A two-pole normally open power relay with a 24 V DC coil, a minimum 3 mm contact gap, rear flange mounting and Faston 250 terminals.
This product has been superseded
A direct replacement is available below.
Replacement product
62.82.9.024.4300 Finder Power relay 2pole 16A DC 24VNO
SKU: 62.82.9.024.4300
£11.49 ex VAT
View
Why Choose the Finder 62.82.9.024.0300 Power Relay?
The Finder 62.82.9.024.0300 is a heavy-duty two-pole normally open electromagnetic power relay designed for dependable switching in industrial control panels, machinery and automation systems. As part of the Finder 62 Series, it combines two normally open contacts with a high switching capacity and a secure rear-flange mounting arrangement.
This relay features a 24 V DC coil and two normally open contacts rated at 16 A. Each contact provides a gap of at least 3 mm when the relay is de-energised, supporting applications where enhanced contact separation is required.
With an AC1 rated load of 4,000 VA and a maximum switching voltage of 400 V AC, the 62.82.9.024.0300 is suitable for demanding industrial control duties. Its rear mounting flange and Faston 250 terminals provide secure panel installation and reliable quick-connect wiring.
Key Advantages
- Heavy-duty two-pole normally open power relay.
- Two normally open contacts allow two circuits to be switched simultaneously.
- Contact gap of at least 3 mm for enhanced circuit separation.
- 16 A rated contact current for demanding industrial loads.
- 24 V DC coil compatible with common control systems.
- Rear flange and Faston 250 terminals support secure panel installation.
Key Features
- Finder 62.82 Series electromagnetic power relay.
- 2 NO (DPST-NO) contact configuration.
- Minimum 3 mm contact gap.
- 16 A rated contact current.
- 24 V DC nominal coil voltage.
- 3 W coil power consumption.
- Rear flange mounting for industrial panels and equipment.
- Faston 250 terminals for direct electrical connection.
Reliable Normally Open Industrial Switching
The Finder 62.82.9.024.0300 uses a 24 V DC control signal to close two normally open contacts simultaneously. This allows one control output to energise two separate load circuits while maintaining electrical isolation between the coil and switched contacts.
The minimum 3 mm contact gap provides enhanced separation when the relay is de-energised. Its rear mounting flange secures the relay to a panel or equipment chassis, while the Faston 250 terminals enable direct quick-connect wiring.
Typical Applications
- Industrial control panels and automation equipment.
- Machinery and production systems.
- Industrial motors and contactor-control circuits.
- Burners, boilers, furnaces and heating systems.
- Pumps, fans and ventilation equipment.
- Electrical power-management systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Load Voltage | 400 V AC | |
| Mounting Type | Panel | |
| Switching Current (A) | 16 A | |
| Contacts | 4NO | |
| HS Code | 85364900 | |
| Manufacturer | Finder | |
| Series | 62.82 | |
| Model | 62.82.9.024.0300 | |
| Product type | Electromagnetic power relay | |
| Contact configuration | 2 NO (DPST-NO) | |
| Minimum contact gap | 3 mm | |
| Rated contact current | 16 A | |
| Maximum peak current | 120 A for 5 ms | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated load AC1 | 4,000 VA | |
| Rated load AC15 at 230 V AC | 750 VA | |
| Motor rating at 230 V AC | 0.8 kW | |
| DC1 switching capacity at 24 / 110 / 220 V DC | 16 / 0.6 / 0.4 A | |
| Minimum switching load | 1,000 mW (10 V / 10 mA) | |
| Nominal coil voltage | 24 V DC | |
| Coil current | 125 mA | |
| Coil power consumption | 3 W | |
| Contact material | AgCdO | |
| Operate / release time | 15 / 3 ms | |
| Dielectric strength between open contacts | 3,000 V AC | |
| Mounting type | Rear flange / panel mounting | |
| Terminal type | Faston 250 | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Environmental protection | RT I | |
| Operating temperature | −40 to +50 °C |
Frequently Asked Questions
What is the Finder 62.82.9.024.0300 used for?
It is used to switch two normally open load circuits in industrial control panels, machinery, motor controls, heating equipment and automation systems.
What coil voltage does this relay require?
The Finder 62.82.9.024.0300 has a nominal 24 V DC coil.
What is the contact configuration?
The relay has two normally open contacts, also described as a 2 NO or DPST-NO contact configuration.
What contact gap does this relay provide?
The normally open contacts provide a gap of at least 3 mm when the relay is de-energised.
How is the relay mounted and connected?
The relay uses a rear mounting flange for panel installation and Faston 250 terminals measuring 6.3 × 0.8 mm for electrical connections.
Trusted Industrial Relay Technology
Finder 62 Series power relays provide reliable, high-capacity switching for industrial machinery and control panels where secure mounting and dependable contact separation are essential.
