Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.82.9.024.0070 Finder Power relay 2pole 16A DC 24V
Finder 62.82.9.024.0070 is a 16 A two-pole changeover power relay with a 24 V DC coil, rear flange mounting, a lockable test button, an LED indicator and a suppression diode.
This product has been superseded
A direct replacement is available below.
Replacement product
62.82.9.024.4070 Finder Power relay 2pole 16A DC 24V
SKU: 62.82.9.024.4070
View
Why Choose the Finder 62.82.9.024.0070 Power Relay?
The Finder 62.82.9.024.0070 is a robust two-pole electromagnetic power relay designed for dependable switching in industrial control panels, machinery and automation systems. As part of the Finder 62 Series, it combines two changeover contacts with a high switching capacity and a durable rear-flange mounting arrangement.
This relay features a 24 V DC coil and two changeover contacts rated at 16 A. Its lockable test button enables manual contact operation during commissioning and fault-finding, while the integrated LED provides clear visual confirmation when the coil is energised.
A built-in suppression diode helps protect PLC outputs and other sensitive control electronics from the reverse-voltage transient generated when the DC coil is switched off. The relay’s rear mounting flange and Faston 250 terminals provide secure panel installation and reliable quick-connect wiring.
Key Advantages
- Heavy-duty two-pole power relay for industrial switching.
- Two changeover contacts allow two circuits to be controlled simultaneously.
- 16 A rated contact current for demanding electrical loads.
- 24 V DC coil compatible with common industrial control systems.
- Lockable test button supports manual operation during commissioning.
- Integrated LED and suppression diode provide status indication and transient protection.
Key Features
- Finder 62.82 Series electromagnetic power relay.
- 2 CO (DPDT) contact configuration.
- 16 A rated contact current.
- 24 V DC nominal coil voltage.
- 1.3 W coil power consumption.
- Integrated lockable test button, LED and suppression diode.
- Positive coil polarity connected to terminal A1.
- Rear flange mounting with Faston 250 terminals.
Protected Switching with Manual Testing
Electromagnetic power relays allow a low-power control signal to operate electrically isolated load circuits. The Finder 62.82.9.024.0070 uses a 24 V DC coil to operate two changeover contacts, allowing two separate circuits to switch between normally closed and normally open states.
The suppression diode absorbs the inductive voltage generated when the DC coil is de-energised, helping protect PLC outputs and electronic control devices. Because the diode makes the coil polarity-sensitive, the positive supply must be connected to terminal A1. The lockable test button and LED also support efficient commissioning and fault diagnosis.
Typical Applications
- Industrial control panels and automation equipment.
- PLC-controlled machinery and production systems.
- Industrial motor-control circuits.
- Burners, boilers, furnaces and heating systems.
- Pumps, fans and ventilation equipment.
- Electrical power-management systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Switching Current (A) | 16 A | |
| Load Voltage | 400 V AC | |
| Mounting Type | Panel | |
| Contacts | 2 C/O | |
| HS Code | 85364900 | |
| Manufacturer | Finder | |
| Series | 62.82 | |
| Model | 62.82.9.024.0070 | |
| Product type | Electromagnetic power relay | |
| Contact configuration | 2 CO (DPDT) | |
| Rated contact current | 16 A | |
| Maximum peak current | 120 A for 5 ms | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated load AC1 | 4,000 VA | |
| Rated load AC15 at 230 V AC | 750 VA | |
| Motor rating at 230 V AC | 0.8 kW | |
| DC1 switching capacity at 24 / 110 / 220 V DC | 16 / 0.6 / 0.4 A | |
| Minimum switching load | 1,000 mW (10 V / 10 mA) | |
| Nominal coil voltage | 24 V DC | |
| Coil current | 54 mA | |
| Coil power consumption | 1.3 W | |
| Contact material | AgCdO | |
| Operate / release time | 11 / 4 ms | |
| Operating controls | Lockable test button | |
| Coil accessories | LED and suppression diode | |
| Coil polarity | Positive to A1 | |
| Mounting type | Rear flange / panel mounting | |
| Terminal type | Faston 250 | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Environmental protection | RT I | |
| Operating temperature | −40 to +70 °C |
Frequently Asked Questions
What is the Finder 62.82.9.024.0070 used for?
It is used to switch electrical loads in industrial control panels, PLC-controlled machinery, heating equipment, motor-control circuits and automation systems.
What coil voltage does this relay require?
The Finder 62.82.9.024.0070 has a nominal 24 V DC coil.
What is the contact configuration?
The relay has two changeover contacts, also described as a 2 CO or DPDT contact configuration, rated at 16 A.
What testing and indication features are included?
This version includes a lockable test button and LED indicator, supporting manual contact operation and visual confirmation that the coil is energised.
Is coil polarity important when installing this relay?
Yes. The built-in suppression diode makes the coil polarity-sensitive, so the positive 24 V DC supply must be connected to terminal A1.
Trusted Industrial Relay Technology
Finder 62 Series power relays provide reliable, high-capacity switching for industrial machinery and control panels where secure mounting, convenient testing and protection for electronic controls are essential.
