62.82.9.024.0069 Finder Power relay 2pole 16A DC 24V

Q: What is the Finder 62.82.9.024.0069 used for?

The Finder 62.82.9.024.0069 is an industrial electromechanical power relay used to switch electrical circuits in automation equipment, machinery and electrical control systems. Its two changeover contacts allow two independent circuits to be controlled using a single coil signal.

Q: What coil voltage does the Finder 62.82.9.024.0069 require?

The relay uses a 24 V DC nominal coil. The standard Finder 62.82 DC coil specification provides an operating range of 19.2–26.4 V DC, corresponding to 80–110% of nominal voltage.

Q: What is the contact rating of this Finder power relay?

The relay has two changeover contacts rated at 16 A, with a rated contact voltage of 250 V AC and a maximum switching voltage of 400 V AC. Its rated AC1 switching capacity is 4,000 VA, subject to the electrical load category and operating conditions.

Q: What does the DPDT contact configuration mean?

DPDT (double-pole double-throw) means the relay contains two independent changeover contacts. Each contact switches between normally closed and normally open connections when the coil is energised, allowing two separate electrical circuits to be controlled simultaneously.

Q: How is the Finder 62.82.9.024.0069 installed?

The relay uses a rear flange mounting arrangement and Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm. It is designed for secure installation onto a suitable chassis or mounting surface within industrial electrical equipment.

62.82.9.024.0069 Finder Power relay 2pole 16A DC 24V.

SKU: 62.82.9.024.0069Alt SKU: 628290240069MPN: 62.82.9.024.0069

Why Choose the Finder 62.82.9.024.0069 Power Relay?

The Finder 62.82.9.024.0069 is a robust and reliable 16 A industrial electromechanical power relay featuring a 24 V DC coil and two changeover contacts (DPDT). As part of the established Finder 62 Series power relay range, it is designed for dependable switching of electrical circuits in industrial automation, machinery, power management and electrical control applications.

The relay incorporates two independent changeover contacts (2 CO), enabling two electrical circuits to be switched simultaneously using a single control signal. Its monostable electromagnetic operating mechanism automatically returns the contacts to their normal positions when the coil is de-energised. The 62 Series combines high switching capacity with reinforced insulation between the coil and contacts, supporting reliable electrical separation in industrial equipment.

With a 24 V DC nominal coil voltage, 16 A rated contact current and 250 V AC rated contact voltage, the Finder 62.82.9.024.0069 is suitable for industrial control systems, machinery interfaces, auxiliary switching circuits and electrical automation equipment. Its rear flange mounting arrangement and Faston 250 terminals provide a practical installation solution for control cabinets and industrial equipment.

Key Advantages

Reliable 16 A industrial power relay for electrical switching and automation applications.
24 V DC operating coil compatible with suitable industrial DC control circuits.
Two changeover contacts (DPDT / 2 CO) allow simultaneous switching of two independent circuits.
250 V AC rated contact voltage for industrial electrical loads.
4,000 VA rated AC1 switching capacity for resistive load applications.
750 VA rated AC15 switching capacity at 230 V AC for suitable electromagnetic loads.
Rear flange mounting supports secure installation onto suitable mounting surfaces.
Faston 250 quick-connect terminals simplify electrical connections and servicing.
Reinforced coil-to-contact insulation provides dependable electrical separation.
Monostable operation automatically returns contacts to their normal positions when coil power is removed.
Robust construction supports industrial machinery and automation applications.

Key Features

Finder 62 Series industrial power relay.
24 V DC nominal coil voltage.
Two changeover contacts (DPDT / 2 CO).
16 A rated contact current.
250 V AC rated contact voltage.
400 V AC maximum switching voltage.
4,000 VA rated AC1 switching capacity.
750 VA rated AC15 load at 230 V AC.
1.3 W nominal DC coil consumption.
445 Ω nominal coil resistance.
19.2–26.4 V DC nominal coil operating range.
6 kV coil-to-contact impulse withstand voltage.
Reinforced insulation between coil and contact circuits.
Faston 250 (6.3 × 0.8 mm) terminals.
Rear flange mounting for industrial equipment installation.
Monostable electromechanical switching mechanism.

Reliable Power Switching for Industrial Automation

Electromechanical power relays such as the Finder 62.82.9.024.0069 provide electrical isolation between control and load circuits. When the 24 V DC coil is energised, the relay's electromagnetic mechanism operates its two changeover contacts simultaneously. Each contact transfers between normally closed and normally open connections, enabling two independent electrical circuits to be controlled through a single switching signal.

The Finder 62 Series is designed for industrial applications requiring dependable switching performance, high contact capacity and robust electrical insulation. The 62.82 configuration uses rear flange mounting and Faston 250 terminals, making it suitable for direct installation into machinery and electrical equipment. Its reinforced coil-to-contact insulation and versatile changeover contact arrangement support integration into modern industrial control systems, with connected loads selected according to the applicable switching category and electrical ratings.

Typical Applications

Industrial automation and electrical control panels.
PLC-controlled switching and interface circuits.
Industrial machinery and manufacturing equipment.
Motor control auxiliary circuits and electrical interlocking.
Industrial heating, furnaces and ovens.
Burner and boiler control systems.
Road and tunnel lighting control equipment.
Electrical power management and distribution control.
Industrial signalling and auxiliary switching circuits.
OEM machinery and industrial electrical system integration.

Technical Specifications

Tick the specs you need, then view products that match.

Device Type	Power Relay
Load Voltage	400 V AC
Switching Current (A)	16 A
Manufacturer	Finder
Series	62 Series Power Relays
Model	62.82.9.024.0069
Product type	Electromechanical power relay
Relay configuration	2-pole changeover (DPDT / 2 CO)
Number of contacts	2 changeover contacts
Nominal coil voltage	24 V DC
Coil supply type	DC
Operating principle	Monostable
Nominal coil consumption	1.3 W
Nominal coil resistance	445 Ω
Nominal coil current	Approximately 54 mA
Coil operating voltage range	19.2–26.4 V DC
Rated contact current	16 A
Rated contact voltage	250 V AC
Maximum switching voltage	400 V AC
Rated load AC1	4,000 VA
Rated load AC15	750 VA at 230 V AC
Single-phase motor rating	0.8 kW at 230 V AC
DC1 breaking capacity at 24 V DC	16 A
DC1 breaking capacity at 110 V DC	0.6 A
DC1 breaking capacity at 220 V DC	0.4 A
Minimum switching load	1,000 mW (10 V / 10 mA)
Mechanical endurance	30 million operations for the standard DC coil configuration
Electrical endurance	100,000 operations at rated AC1 load
Typical operate time	11 ms
Typical release time	4 ms
Coil-to-contact impulse withstand voltage	6 kV (1.2/50 µs)
Dielectric strength between open contacts	1,500 V AC
Insulation type	Reinforced insulation between coil and contacts
Coil-to-contact clearance	6 mm
Coil-to-contact creepage distance	8 mm
Operating ambient temperature	−40 to +70 °C for the standard 62.82 DC coil configuration
Environmental protection category	RT I
Mounting type	Rear flange / chassis mounting
Terminal arrangement	Faston 250 quick-connect terminals
Terminal dimensions	6.3 × 0.8 mm
Contact arrangement	Two independent changeover circuits

Frequently Asked Questions

What is the Finder 62.82.9.024.0069 used for?

The Finder 62.82.9.024.0069 is an industrial electromechanical power relay used to switch electrical circuits in automation equipment, machinery and electrical control systems. Its two changeover contacts allow two independent circuits to be controlled using a single coil signal.

What coil voltage does the Finder 62.82.9.024.0069 require?

The relay uses a 24 V DC nominal coil. The standard Finder 62.82 DC coil specification provides an operating range of 19.2–26.4 V DC, corresponding to 80–110% of nominal voltage.

What is the contact rating of this Finder power relay?

The relay has two changeover contacts rated at 16 A, with a rated contact voltage of 250 V AC and a maximum switching voltage of 400 V AC. Its rated AC1 switching capacity is 4,000 VA, subject to the electrical load category and operating conditions.

What does the DPDT contact configuration mean?

DPDT (double-pole double-throw) means the relay contains two independent changeover contacts. Each contact switches between normally closed and normally open connections when the coil is energised, allowing two separate electrical circuits to be controlled simultaneously.

How is the Finder 62.82.9.024.0069 installed?

The relay uses a rear flange mounting arrangement and Faston 250 quick-connect terminals measuring 6.3 × 0.8 mm. It is designed for secure installation onto a suitable chassis or mounting surface within industrial electrical equipment.

Trusted by Industrial Automation Professionals Worldwide

Finder 62 Series power relays provide dependable electrical switching for industrial automation, machinery and electrical control applications. The Finder 62.82.9.024.0069 combines a 16 A contact rating, 24 V DC operating coil, two changeover contacts and robust flange-mounted construction to deliver a practical solution for industrial multi-circuit switching and control.

Device Type	Power Relay
Load Voltage	400 V AC
Switching Current (A)	16 A
Manufacturer	Finder
Series	62 Series Power Relays
Model	62.82.9.024.0069
Product type	Electromechanical power relay
Relay configuration	2-pole changeover (DPDT / 2 CO)
Number of contacts	2 changeover contacts
Nominal coil voltage	24 V DC
Coil supply type	DC
Operating principle	Monostable
Nominal coil consumption	1.3 W
Nominal coil resistance	445 Ω
Nominal coil current	Approximately 54 mA
Coil operating voltage range	19.2–26.4 V DC
Rated contact current	16 A
Rated contact voltage	250 V AC
Maximum switching voltage	400 V AC
Rated load AC1	4,000 VA
Rated load AC15	750 VA at 230 V AC
Single-phase motor rating	0.8 kW at 230 V AC
DC1 breaking capacity at 24 V DC	16 A
DC1 breaking capacity at 110 V DC	0.6 A
DC1 breaking capacity at 220 V DC	0.4 A
Minimum switching load	1,000 mW (10 V / 10 mA)
Mechanical endurance	30 million operations for the standard DC coil configuration
Electrical endurance	100,000 operations at rated AC1 load
Typical operate time	11 ms
Typical release time	4 ms
Coil-to-contact impulse withstand voltage	6 kV (1.2/50 µs)
Dielectric strength between open contacts	1,500 V AC
Insulation type	Reinforced insulation between coil and contacts
Coil-to-contact clearance	6 mm
Coil-to-contact creepage distance	8 mm
Operating ambient temperature	−40 to +70 °C for the standard 62.82 DC coil configuration
Environmental protection category	RT I
Mounting type	Rear flange / chassis mounting
Terminal arrangement	Faston 250 quick-connect terminals
Terminal dimensions	6.3 × 0.8 mm
Contact arrangement	Two independent changeover circuits

UK delivery

Delivery options

Free UK delivery on orders over £200 ex VAT. Order in-stock items before 2pm Monday to Friday for next-day delivery.

This product Manufacturer Lead Time

Standard Manufacturer Lead Time 6-8 Weeks, Call For Express Delivery Options

Standard delivery

£8 ex VAT · free over £200

UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.

Heavier items may be charged at a weight-based or pallet rate, shown at checkout.

Collect from our showroom

Mon–Fri, 8am–5pm

Order and pay online, then collect from our showroom.

Please allow 15–30 minutes after ordering for us to prepare your order.

Northern Ireland, ROI & export

Priced at checkout

We deliver to Northern Ireland, the Republic of Ireland and overseas.

Delivery is calculated at checkout based on your destination.

Orders with mixed availability

Shipped complete

If part of your order is on a lead time, we hold it and send everything together.

Need the in-stock items sooner? Ask us and we can split the delivery.

Business customer returns

Returns & order support

Need to return an item? Find the guidance for your order below, then contact our team before sending anything back.

Stocked items

Request within 30 days

Changed your mind or ordered the wrong item? Request a return within 30 days of receipt. There is no restocking charge.

Items must be unused, in resalable condition and in their original packaging, and returns need our approval first. Return carriage is at your cost, and the original delivery charge is not refunded.

Faulty or damaged items

Tell us as soon as possible

Faulty, damaged on delivery or the wrong product supplied? Contact our team as soon as possible with the details.

We will review the issue and arrange an appropriate resolution under our terms and conditions and your statutory rights.

Made-to-order items

Manufacturer approval needed

Manufactured, configured and special-order products can only be returned with the manufacturer’s approval. Any handling charge is agreed with you when you request the return.

This does not affect claims for faulty goods or items that do not meet the agreed specification.

LED Controls showroom with electrical products on display

Let’s get your return sorted.

Send your order number, product details and reason for return. For faults or delivery damage, include photographs if available. We will confirm the next steps.

Email returns team 01706 242050

The 30-day return request period applies to change-of-mind returns for stocked items. It does not limit your statutory rights for faulty or non-conforming goods.