Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.82.9.024.0060 Finder Power relay 2pole 16A DC 24V
Finder 62.82.9.024.0060 is a 16 A two-pole changeover power relay with a 24 V DC coil, rear flange mounting, an LED indicator and an integrated suppression diode.
This product has been superseded
A direct replacement is available below.
Replacement product
62.82.9.024.4060 Finder Power relay 2pole 16A DC 24V
SKU: 62.82.9.024.4060
£14.94 ex VAT
View
Why Choose the Finder 62.82.9.024.0060 Power Relay?
The Finder 62.82.9.024.0060 is a robust two-pole electromagnetic power relay designed for dependable switching in industrial control panels, machinery and automation systems. As part of the Finder 62 Series, it combines two changeover contacts with a high switching capacity and a durable rear-flange mounting arrangement.
This relay features a 24 V DC coil and two changeover contacts rated at 16 A. An integrated LED provides clear visual confirmation when the coil is energised, helping engineers inspect the relay’s control status during operation and fault-finding.
A built-in suppression diode helps protect PLC outputs and other sensitive control electronics from the reverse-voltage transient generated when the DC coil is switched off. The relay’s rear mounting flange and Faston 250 terminals provide secure panel installation and reliable quick-connect wiring.
Key Advantages
- Heavy-duty two-pole power relay for industrial switching.
- Two changeover contacts allow two circuits to be controlled simultaneously.
- 16 A rated contact current for demanding electrical loads.
- 24 V DC coil compatible with common industrial control systems.
- Integrated LED provides clear visual confirmation of coil energisation.
- Built-in suppression diode helps protect electronic control outputs.
Key Features
- Finder 62.82 Series electromagnetic power relay.
- 2 CO (DPDT) contact configuration.
- 16 A rated contact current.
- 24 V DC nominal coil voltage.
- 1.3 W coil power consumption.
- Integrated LED and polarity-sensitive suppression diode.
- Positive coil polarity connected to terminal A1.
- Rear flange mounting with Faston 250 terminals.
Protected Switching for Electronic Control Systems
Electromagnetic power relays allow a low-power control signal to operate electrically isolated load circuits. The Finder 62.82.9.024.0060 uses a 24 V DC coil to operate two changeover contacts, allowing two separate circuits to switch between normally closed and normally open states.
The suppression diode absorbs the inductive voltage generated when the DC coil is de-energised, helping protect PLC outputs and electronic control devices. Because the diode makes the coil polarity-sensitive, the positive supply must be connected to terminal A1. The integrated LED provides a convenient visual indication that the coil is energised.
Typical Applications
- Industrial control panels and automation equipment.
- PLC-controlled machinery and production systems.
- Industrial motor-control circuits.
- Burners, boilers, furnaces and heating systems.
- Pumps, fans and ventilation equipment.
- Electrical power-management systems.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Load Voltage | 400 V AC | |
| Mounting Type | Panel | |
| Switching Current (A) | 16 A | |
| Contacts | 2 C/O | |
| HS Code | 85364900 | |
| Manufacturer | Finder | |
| Series | 62.82 | |
| Model | 62.82.9.024.0060 | |
| Product type | Electromagnetic power relay | |
| Contact configuration | 2 CO (DPDT) | |
| Rated contact current | 16 A | |
| Maximum peak current | 120 A for 5 ms | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated load AC1 | 4,000 VA | |
| Rated load AC15 at 230 V AC | 750 VA | |
| Motor rating at 230 V AC | 0.8 kW | |
| DC1 switching capacity at 24 / 110 / 220 V DC | 16 / 0.6 / 0.4 A | |
| Minimum switching load | 1,000 mW (10 V / 10 mA) | |
| Nominal coil voltage | 24 V DC | |
| Coil current | 54 mA | |
| Coil power consumption | 1.3 W | |
| Contact material | AgCdO | |
| Operate / release time | 11 / 4 ms | |
| Coil accessories | LED and suppression diode | |
| Coil polarity | Positive to A1 | |
| Mounting type | Rear flange / panel mounting | |
| Terminal type | Faston 250 | |
| Terminal dimensions | 6.3 × 0.8 mm | |
| Environmental protection | RT I | |
| Operating temperature | −40 to +70 °C |
Frequently Asked Questions
What is the Finder 62.82.9.024.0060 used for?
It is used to switch electrical loads in industrial control panels, PLC-controlled machinery, heating equipment, motor-control circuits and automation systems.
What coil voltage does this relay require?
The Finder 62.82.9.024.0060 has a nominal 24 V DC coil.
What is the contact configuration?
The relay has two changeover contacts, also described as a 2 CO or DPDT contact configuration, rated at 16 A.
What electrical protection is built into the coil circuit?
The relay includes a suppression diode that helps protect connected electronic controls from the reverse-voltage transient produced when the coil is switched off.
Is coil polarity important when installing this relay?
Yes. The built-in diode makes the coil polarity-sensitive, so the positive 24 V DC supply must be connected to terminal A1.
Trusted Industrial Relay Technology
Finder 62 Series power relays provide reliable, high-capacity switching for industrial machinery and control panels where secure mounting, clear coil-status indication and protection for electronic controls are essential.
