Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.82.8.110.4300 Finder Power relay 2pole 16A 110V
62.82.8.110.4300 Finder Power relay 2pole 16A 110V.
£12.57
Why Choose the Finder 62.82.8.110.4300 Industrial Power Relay?
The Finder 62.82.8.110.4300 is a heavy-duty 16 A industrial electromechanical power relay designed for reliable switching of electrical loads in industrial automation, machinery and electrical control systems. Part of the established Finder 62 Series, this model combines a 110 V AC coil with two normally open contacts and a flange-mounting arrangement.
The relay features a 2 NO (DPST-NO) contact configuration with a contact gap of at least 3 mm when open. Each contact is rated at 16 A and 250 V AC, with a maximum switching voltage of 400 V AC and a rated AC1 switching capacity of 4,000 VA. This configuration is particularly useful where two electrical circuits must be energised simultaneously.
The Finder 62.82.8.110.4300 incorporates silver tin oxide (AgSnO2) contacts, Faston 250 quick-connect terminals and a rear flange-mounting design. Its combination of high-current switching, reinforced coil-to-contact insulation and increased normally open contact separation makes it suitable for industrial control equipment and appropriately rated power-switching applications.
Key Advantages
- 16 A contact rating: Supports switching of appropriately rated industrial electrical loads.
- 110 V AC coil: Designed for compatible AC control circuits operating at 50/60 Hz.
- Two normally open contacts: Allows simultaneous switching of two independent circuits.
- Minimum 3 mm contact gap: Provides increased contact separation in the open state.
- Silver tin oxide contacts: AgSnO2 contact material supports reliable industrial power switching.
- Faston 250 terminals: Enables practical electrical connection using compatible quick-connect terminals.
- Rear flange mounting: Supports direct mounting within suitable electrical equipment and control panels.
- High impulse insulation: Provides 6 kV coil-to-contact impulse withstand capability.
- High peak-current capability: The contact system is rated for a maximum peak current of 120 A for 5 ms.
- Industrial construction: Designed for demanding automation, machinery and electrical switching applications.
Key Features
- Finder 62 Series industrial power relay.
- 62.82 flange-mounted relay construction.
- 110 V AC nominal coil voltage.
- 50/60 Hz AC coil operation.
- 2 NO (DPST-NO) contact configuration.
- 16 A rated contact current.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 4,000 VA rated AC1 switching capacity.
- 750 VA rated AC15 switching capacity at 230 V AC.
- 120 A maximum peak contact current for 5 ms.
- At least 3 mm contact separation when open.
- Silver tin oxide (AgSnO2) contact material.
- Monostable electromechanical operation.
- Faston 250 quick-connect terminals.
- Rear flange mounting.
- Reinforced insulation between coil and contacts.
- RT I environmental protection category.
Reliable High-Current Switching for Industrial Automation
The Finder 62.82.8.110.4300 enables a 110 V AC control signal to operate two independent normally open contact sets. When the relay coil is energised, both contacts close to complete their respective electrical circuits. When coil power is removed, the contacts return to their normally open positions.
A distinguishing feature of the 62.82-4300 configuration is its contact separation of at least 3 mm. This provides a greater open-contact gap than standard changeover variants and makes the relay useful in applications where the specified contact separation is an important design requirement. Its 16 A current rating and 4,000 VA AC1 switching capacity support appropriately rated resistive loads.
The rear flange mounting and Faston 250 terminals allow the relay to be incorporated directly into suitable electrical equipment. Its reinforced coil-to-contact insulation, silver tin oxide contacts and industrial construction make it a practical choice for machine builders, electrical panel manufacturers and automation engineers. Load-specific switching ratings and installation requirements should always be checked before use.
Typical Applications
- Industrial electrical control panels.
- Machinery and production equipment.
- Industrial automation and process control.
- Electrical power and load switching.
- Heating and ventilation control equipment.
- Building automation systems.
- Auxiliary control and switching circuits.
- Electrical equipment requiring two normally open contacts.
- OEM industrial machinery and electrical assemblies.
- Control systems using 110 V AC supplies.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Switching Current (A) | 16 A | |
| Load Voltage | 400 V AC | |
| Manufacturer | Finder | |
| Series | 62 Series | |
| Product code | 62.82.8.110.4300 | |
| Relay type | 62.82 | |
| Product category | Industrial electromechanical power relay | |
| Nominal coil voltage | 110 V AC | |
| Coil type | AC | |
| Coil frequency | 50/60 Hz | |
| Relay operation | Monostable | |
| Contact configuration | 2 NO (DPST-NO) | |
| Number of poles | 2 | |
| Rated contact current | 16 A | |
| Maximum peak contact current | 120 A for 5 ms | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated AC1 switching capacity | 4,000 VA | |
| Rated AC15 switching capacity at 230 V AC | 750 VA | |
| Contact gap | ≥ 3 mm | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Coil-to-contact impulse withstand voltage | 6 kV | |
| Dielectric strength between open contacts | 3,000 V AC | |
| Coil-to-contact clearance | 6 mm | |
| Coil-to-contact creepage distance | 8 mm | |
| Operate time | 15 ms | |
| Release time | 3 ms | |
| Mechanical life | 10 million operations with AC coil | |
| Electrical life at rated AC1 load | 100,000 operations | |
| Operating temperature range | −40 to +50 °C | |
| Environmental protection category | RT I | |
| Mounting | Rear flange mounting | |
| Terminal type | Faston 250 quick-connect | |
| Terminal dimensions | 6.3 × 0.8 mm |
Frequently Asked Questions
What is the Finder 62.82.8.110.4300 used for?
The Finder 62.82.8.110.4300 is a 16 A industrial power relay designed for switching two electrical circuits in industrial automation, machinery, control panels and other compatible electrical equipment.
What coil voltage does the Finder 62.82.8.110.4300 require?
The relay uses a nominal 110 V AC coil operating at 50/60 Hz. It must be connected to a compatible AC control supply rather than a DC supply.
What is the contact rating of the Finder 62.82.8.110.4300?
The relay has two normally open contacts rated at 16 A and 250 V AC, with a maximum switching voltage of 400 V AC and a rated AC1 switching capacity of 4,000 VA. Actual load suitability depends on the switching duty.
What does the 4300 contact configuration mean?
The 4300 configuration identifies silver tin oxide contacts with a normally open contact arrangement providing at least 3 mm separation when open. The Finder 62.82.8.110.4300 therefore has two normally open contacts rather than two changeover contacts.
How is the Finder 62.82.8.110.4300 installed?
The relay is designed for rear flange mounting and uses Faston 250 terminals measuring 6.3 × 0.8 mm. It can be installed directly in suitable electrical equipment using appropriate mounting hardware and compatible electrical connectors.
Trusted by Industrial Automation and Electrical Control Professionals
Finder 62 Series industrial power relays provide reliable high-current switching solutions for automation engineers, machine builders and electrical control panel manufacturers, combining robust contact construction, reinforced electrical insulation and practical mounting arrangements for demanding industrial applications.
