Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
Finder 62.33.9.125.4000 is a 16 A three-pole changeover electromagnetic power relay with a 125 V DC coil, silver tin oxide contacts and plug-in mounting for industrial automation, machinery control and electrical switching applications.
The Finder 62.33.9.125.4000 is a 16 A electromagnetic power relay with a 125 V DC operating coil, designed for dependable electrical switching in industrial automation, machinery control and electrical control panels. Part of the established Finder 62 Series, this industrial relay combines three-pole switching capability with a practical plug-in design for electrical control applications.
Featuring three changeover contacts (3 CO / 3PDT), the Finder 62.33.9.125.4000 enables three independent electrical circuits to be controlled simultaneously using a single DC control signal. Each changeover contact provides normally open and normally closed switching paths, making the relay suitable for applications requiring coordinated control, signalling or equipment interlocking.
With its 125 V DC nominal coil voltage, 16 A contact current rating and 250 V AC rated switching voltage, this relay provides a versatile interface between industrial DC control systems and electrical loads. The silver tin oxide (AgSnO2) contacts offer resistance to contact welding, while the plug-in mounting arrangement supports straightforward installation and replacement using compatible Finder 92 Series relay sockets.
Technical note: The specifications above describe the 62.33 relay family and the coil and contact configuration indicated by the manufacturer part number. Exact 125 V DC coil consumption, coil resistance, operating voltage limits, switching-category ratings and product-specific approvals should be confirmed against Finder's current datasheet before final engineering selection. The 16 A rating must not be assumed to apply to every load type or DC switching voltage.
The Finder 62.33.9.125.4000 enables three electrical circuits to be controlled through a single 125 V DC operating coil. When the coil is energised, the electromagnetic mechanism transfers all three changeover contacts from their normally closed positions to their normally open positions. When the coil is de-energised, the contacts return to their original positions, providing repeatable switching for industrial control systems.
The 3PDT contact arrangement provides greater flexibility than a normally open-only relay because each contact set can select between two electrical paths. This makes the relay useful for control logic, status signalling, equipment interlocking and coordinated switching applications where several functions must respond to the same control signal.
Its 125 V DC coil makes the Finder 62.33.9.125.4000 suitable for compatible DC control supplies used in industrial equipment and electrical installations. The relay can switch appropriately rated AC or DC loads, provided the relevant contact ratings, load characteristics and switching conditions are observed.
The silver tin oxide contact material supports reliable electromechanical switching in demanding applications, while the plug-in mounting arrangement makes servicing more convenient. When installed with a compatible Finder 92 Series socket, the relay can be replaced without extensive rewiring, helping reduce maintenance time in industrial control panels and machinery.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Switching Current (A) | 16 A | |
| Load Voltage | 250 V AC | |
| Mounting Type | Plug-in socket | |
| Manufacturer | Finder | |
| Series | 62 Series Power Relays | |
| Manufacturer part number | 62.33.9.125.4000 | |
| Product type | Electromagnetic power relay | |
| Relay family | 62.33 | |
| Nominal coil voltage | 125 V DC | |
| Coil supply type | DC | |
| Coil operation | Electromagnetic, direct current | |
| Number of poles | 3 | |
| Contact configuration | 3 changeover (3 CO / 3PDT) | |
| Normally open contact paths | 3 | |
| Normally closed contact paths | 3 | |
| Rated contact current | 16 A | |
| Rated switching voltage | 250 V AC | |
| Maximum AC switching voltage | 400 V AC, subject to applicable operating conditions | |
| Rated resistive-load switching capacity (AC-1) | 4,000 VA | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Contact circuit option | Standard three-pole changeover configuration | |
| Operating principle | Electromagnetic changeover switching | |
| Relay operation | Monostable / non-latching | |
| Mounting type | Plug-in / socket mounting | |
| Terminal type | Faston 187 quick-connect terminals | |
| Terminal dimensions | 4.8 × 0.5 mm | |
| Compatible socket family | Finder 92 Series, subject to socket selection | |
| Application | Industrial automation, machinery control and electrical switching |
The Finder 62.33.9.125.4000 is a 16 A electromagnetic power relay used for switching electrical circuits in industrial automation, machinery control and electrical control panels. Its three changeover contacts allow three independent circuits to be controlled using a single 125 V DC operating coil.
The relay uses a 125 V DC nominal operating coil. It is designed for direct-current coil operation and must be connected to a compatible DC control supply within the manufacturer's specified operating voltage limits. It should not be connected directly to an AC coil supply.
The Finder 62.33 relay family has a 16 A nominal contact rating at 250 V AC for specified resistive loads, with a rated AC-1 switching capacity of 4,000 VA. The permissible switching current depends on the applied voltage, load type and switching category. DC load ratings must be checked separately.
3 CO means three changeover contacts, also known as 3PDT (three-pole double-throw). Each contact set has common, normally closed and normally open connections. Energising the relay coil transfers all three contact sets simultaneously, allowing three independent electrical circuits to be switched.
The relay uses a plug-in mounting arrangement with Faston 187 quick-connect terminals measuring 4.8 × 0.5 mm. It can be installed using a compatible Finder 92 Series relay socket, provided the socket matches the three-pole changeover configuration and applicable electrical ratings.
Finder 62 Series power relays are designed for industrial automation, machinery control and electrical installations where dependable switching and straightforward maintenance are essential. The Finder 62.33.9.125.4000 combines a 125 V DC operating coil, 16 A contact rating, three changeover contacts and silver tin oxide contact technology in a practical plug-in format for industrial electrical control systems.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.