Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.33.8.400.4040 Finder Power relay 3 pole 16A 400V
Finder 62.33.8.400.4040 is an industrial electromechanical power relay featuring a 400 V AC operating coil, three changeover contacts and a Faston 187 plug-in connection arrangement for industrial automation and electrical switching applications.
£16.02
Why Choose the Finder 62.33.8.400.4040 Power Relay?
The Finder 62.33.8.400.4040 is an industrial electromechanical power relay from the Finder 62 Series, designed for electrical switching in automation equipment, machinery and control panels. It combines a 400 V AC operating coil with 3 changeover contacts (3 CO / 3PDT), enabling three separate circuits to be controlled from a single relay.
The Finder 62.33 relay design provides a practical solution for installations requiring multi-circuit switching and convenient maintenance. Its Faston 187 plug-in terminals support integration into compatible relay socket assemblies, allowing the relay to be replaced without redesigning the associated control panel wiring.
The 62.33.8.400.4040 is particularly relevant to industrial control systems using a 400 V AC coil supply. Its three changeover contacts allow the relay to transfer connected circuits between normally closed and normally open paths, providing flexibility for auxiliary control, signalling and appropriately rated load-switching applications.
Key Advantages
- 3 changeover contacts (3PDT) provide flexible control of three separate electrical circuits.
- 400 V AC coil supports compatible industrial AC control supplies.
- Finder 62 Series construction is intended for industrial power switching and automation applications.
- Faston 187 plug-in terminals facilitate installation and replacement.
- Changeover switching supports both normally open and normally closed circuit functions.
- Electromechanical operation provides physical contact switching between control and load circuits.
- Monostable operation returns the contacts to their normal positions when the coil is de-energised.
- Suitable for industrial control panels, OEM machinery and auxiliary switching systems.
Key Features
- Finder 62 Series industrial power relay.
- 3 CO (3PDT) contact configuration.
- 400 V AC nominal coil voltage.
- AC-operated electromagnetic coil.
- Three independent changeover contact sets.
- Faston 187 quick-connect terminal arrangement.
- Plug-in relay design for compatible mounting arrangements.
- Monostable, non-latching switching mechanism.
- Suitable for industrial electrical control and automation equipment.
Reliable Switching for Industrial Automation
The Finder 62.33.8.400.4040 operates through an electromagnetic coil and three mechanically linked changeover contact sets. When the 400 V AC coil is energised, the contacts transfer from their normally closed paths to their normally open paths. When the coil is de-energised, the relay returns to its normal contact positions.
This arrangement enables one control signal to operate three separate electrical circuits. It is useful for auxiliary control, signalling and machine sequencing, provided the electrical loads remain within the manufacturer's specified switching ratings. Correct coil supply selection, suitable circuit protection and compatible mounting arrangements are essential for dependable operation.
Typical Applications
- Industrial automation and machinery control systems.
- 400 V AC-operated relay control circuits.
- Electrical control panels and automation cabinets.
- Motor starter auxiliary control circuits.
- Industrial signalling and status switching.
- Heating and ventilation control equipment.
- Multi-circuit electrical control applications.
- OEM machinery and industrial electrical assemblies.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Manufacturer | Finder | |
| Series | 62 Series | |
| Part number | 62.33.8.400.4040 | |
| Product type | Electromechanical power relay | |
| Contact configuration | 3 CO (3PDT) | |
| Number of poles | 3 | |
| Nominal coil voltage | 400 V AC | |
| Coil supply type | AC | |
| Relay operating type | Monostable / non-latching | |
| Connection type | Faston 187 terminals | |
| Mounting arrangement | Plug-in | |
| Product family | Industrial power relays | |
| Application | Industrial automation and electrical circuit switching |
Frequently Asked Questions
What is the Finder 62.33.8.400.4040 used for?
The Finder 62.33.8.400.4040 is an industrial electromechanical power relay used for switching electrical circuits in automation equipment, machinery control systems and industrial control panels.
What coil voltage does the Finder 62.33.8.400.4040 require?
The relay requires a nominal 400 V AC coil supply and should only be connected to a compatible control voltage in accordance with the manufacturer's specifications.
What is the contact configuration of this Finder relay?
The relay features 3 changeover contacts (3 CO / 3PDT), allowing three separate circuits to transfer between normally open and normally closed contact paths.
Is the Finder 62.33.8.400.4040 a latching relay?
No. It is a monostable electromechanical relay, meaning its contacts return to their normal positions when the operating coil is de-energised.
How is the Finder 62.33.8.400.4040 connected?
The relay uses a Faston 187 plug-in terminal arrangement. Any socket or connection assembly must be selected to match the relay's contact layout, coil voltage and installation requirements.
Trusted by Industrial Automation Professionals Worldwide
Finder 62 Series power relays are designed for industrial electrical switching applications where dependable electromagnetic operation, flexible contact arrangements and practical installation are important to control panel builders, automation engineers and equipment manufacturers.
