Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.33.8.400.0020 Finder Power relay 3 pole 16A 400V.
The Finder 62.33.8.400.0020 is a robust and reliable 16 A industrial electromechanical power relay featuring a 400 V AC coil and three changeover contacts (3PDT). Designed for industrial automation, electrical switching and machinery control applications, this relay provides dependable operation of multiple electrical circuits through a single control signal. As part of the established Finder 62 Series power relay range, it combines high switching capacity with convenient plug-in installation.
The relay incorporates three independent changeover contacts (3 CO), enabling three separate electrical circuits to be switched simultaneously. Its monostable electromagnetic operating mechanism automatically returns the contacts to their normal positions when the coil is de-energised. The relay also provides reinforced insulation between the coil and contacts, supporting reliable electrical separation in industrial control equipment.
With a 400 V AC nominal coil voltage, 16 A rated contact current and 250 V AC rated contact voltage, the Finder 62.33.8.400.0020 is suitable for industrial control panels, machinery interfaces, auxiliary motor control circuits and electrical automation systems. Its Faston 187 plug-in terminals allow installation using compatible Finder 92 Series relay sockets or suitable direct connections.
Electromechanical power relays such as the Finder 62.33.8.400.0020 provide galvanic isolation between the operating coil and switched electrical circuits. When the 400 V AC coil is energised, the relay's electromagnetic mechanism operates its three changeover contacts simultaneously. Each contact transfers between normally closed and normally open connections, enabling multiple independent electrical circuits to be controlled using a single switching signal.
The Finder 62 Series is designed for industrial applications requiring dependable switching, multiple contact configurations and convenient maintenance. The 62.33 model's plug-in construction allows straightforward replacement when installed with a compatible Finder 92 Series socket. Its reinforced insulation and industrial contact ratings make it suitable for electrical control equipment where reliable switching and separation between coil and load circuits are important. The contact voltage and load ratings must be observed independently of the 400 V AC coil supply rating.
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Mounting Type | Plug-in socket | |
| Switching Current (A) | 16 A | |
| Load Voltage | 400 V AC | |
| Manufacturer | Finder | |
| Series | 62 Series Power Relays | |
| Model | 62.33.8.400.0020 | |
| Product type | Electromechanical power relay | |
| Relay configuration | 3-pole changeover (3PDT / 3 CO) | |
| Number of contacts | 3 changeover contacts | |
| Nominal coil voltage | 400 V AC | |
| Coil supply type | AC | |
| Coil frequency | 50/60 Hz | |
| Operating principle | Monostable | |
| Nominal coil consumption | 2.2 VA at 50 Hz | |
| Coil resistance | 19,800 Ω | |
| Rated coil current | Approximately 6 mA at 50 Hz | |
| AC coil operating voltage range | 320–440 V AC | |
| Rated contact current | 16 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated load AC1 | 4,000 VA | |
| Rated load AC15 | 750 VA at 230 V AC | |
| Single-phase motor rating | 0.8 kW at 230 V AC | |
| Three-phase motor rating | 1.5 kW at 400 V AC | |
| Minimum switching load | 1,000 mW (10 V / 10 mA) | |
| DC1 breaking capacity at 30 V DC | 16 A | |
| DC1 breaking capacity at 110 V DC | 0.6 A | |
| DC1 breaking capacity at 220 V DC | 0.4 A | |
| Mechanical endurance | 10 million operations (AC coil version) | |
| Electrical endurance | 100,000 operations at rated AC1 load | |
| Typical operate time | 11 ms | |
| Typical release time | 4 ms | |
| Coil-to-contact impulse withstand voltage | 6 kV (1.2/50 µs) | |
| Dielectric strength between open contacts | 1,500 V AC | |
| Insulation type | Reinforced insulation between coil and contacts | |
| Coil-to-contact clearance | 6 mm | |
| Coil-to-contact creepage distance | 8 mm | |
| Operating ambient temperature | −40 to +70 °C | |
| Environmental protection category | RT I | |
| Mounting type | Plug-in / socket mounting | |
| Terminal arrangement | Faston 187 (4.8 × 0.5 mm) | |
| Compatible socket series | Finder 92 Series |
The Finder 62.33.8.400.0020 is an industrial electromechanical power relay used to switch electrical circuits in automation equipment, machinery and electrical control panels. Its three changeover contacts allow three independent circuits to be controlled using a single coil signal.
The relay uses a 400 V AC nominal coil designed for 50/60 Hz operation. Its specified AC coil operating voltage range is 320–440 V AC under the manufacturer's stated operating conditions.
The relay features three changeover contacts rated at 16 A, with a rated contact voltage of 250 V AC and a maximum switching voltage of 400 V AC. Its rated AC1 switching capacity is 4,000 VA, subject to the applicable load category and operating conditions.
No. The 400 V AC specification refers to the relay's nominal coil supply. The contacts have a 250 V AC rated voltage and a 400 V AC maximum switching voltage. The permitted load must be selected according to the manufacturer's contact ratings, switching category and operating conditions.
The relay features Faston 187 plug-in terminals and can be installed using a compatible Finder 92 Series relay socket or suitable direct connections. Socket mounting allows convenient installation and replacement within industrial electrical control panels.
Finder 62 Series power relays provide dependable electrical switching for industrial automation, machinery and electrical control applications. The Finder 62.33.8.400.0020 combines a 16 A contact rating, 400 V AC operating coil, three changeover contacts and convenient plug-in construction to deliver a practical solution for industrial multi-circuit switching and control.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.