Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.32.9.110.4040 Finder Power relay 2pole 16A DC 110VNO
Finder 62.32.9.110.4040 is a 16 A electromechanical power relay featuring a 110 V DC coil, two changeover contacts, silver tin oxide contact material, Faston 187 terminals, a lockable test button and a mechanical indicator for industrial automation and electrical switching applications.
£12.36
Why Choose the Finder 62.32.9.110.4040 Power Relay?
The Finder 62.32.9.110.4040 is a 16 A industrial electromechanical power relay designed for dependable electrical switching in automation systems, machinery control and industrial electrical installations. Part of the established Finder 62 Series, this relay features 2 changeover contacts (2 CO / DPDT), a 110 V DC operating coil and a plug-in connection arrangement for industrial control applications.
The Finder 62.32 relay design combines robust switching performance with convenient installation and maintenance. Its Faston 187 terminals support direct connections or installation using compatible Finder 92 Series sockets. The silver tin oxide (AgSnO2) contact material provides a cadmium-free switching solution for appropriately rated industrial electrical loads.
The 62.32.9.110.4040 configuration incorporates a lockable test button and mechanical indicator, allowing technicians to check relay operation and identify contact status during commissioning and maintenance. Its 16 A contact rating and 110 V DC coil make it suitable for applications requiring DC control signals to operate electrical loads through isolated relay contacts.
Key Advantages
- 16 A contact rating for industrial electrical switching applications.
- 2 changeover contacts (DPDT) provide flexible control of two independent electrical circuits.
- 110 V DC operating coil suitable for compatible industrial DC control systems.
- Lockable test button supports manual operation during appropriate testing and commissioning procedures.
- Mechanical indicator provides visual confirmation of relay operation.
- Silver tin oxide (AgSnO2) contacts provide a cadmium-free contact material.
- Faston 187 plug-in terminals support straightforward installation and replacement.
- Reinforced insulation between coil and contacts supports electrical separation of control and load circuits.
Key Features
- Finder 62 Series industrial electromechanical power relay.
- 2 CO (DPDT) changeover contact configuration.
- 16 A nominal contact current.
- 110 V DC nominal coil voltage.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 4,000 VA rated AC-1 switching capacity.
- 750 VA rated AC-15 load at 230 V AC.
- Silver tin oxide (AgSnO2) contact material.
- Lockable test button for manual contact actuation.
- Mechanical flag indicator for visual monitoring.
- Faston 187 terminals measuring 4.8 × 0.5 mm.
- Compatible with suitable Finder 92 Series relay sockets.
- Monostable, non-latching electromagnetic operation.
- Reinforced insulation between coil and contacts.
- Suitable for industrial automation, electrical control panels and OEM equipment.
Reliable Power Switching for Industrial Automation
The Finder 62.32.9.110.4040 uses an electromagnetic switching mechanism to control two independent electrical circuits. When the 110 V DC coil is energised, both changeover contacts transfer from their normally closed positions to their normally open positions. When coil power is removed, the contacts return to their normal states, providing dependable non-latching operation.
Its lockable test button and mechanical indicator are useful during equipment commissioning, inspection and troubleshooting. The plug-in Faston construction also makes the relay suitable for maintainable industrial control assemblies. Connected loads must remain within the applicable contact ratings, and manual testing should only be undertaken under appropriate safe working conditions.
Typical Applications
- Industrial automation and machinery control systems.
- 110 V DC-operated industrial relay control circuits.
- Electrical control panels and automation cabinets.
- Motor starter auxiliary control and interlocking circuits.
- Industrial and commercial lighting control.
- Heating and temperature control equipment.
- Electrical signalling and auxiliary switching systems.
- OEM machinery and industrial electrical assemblies.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Switching Current (A) | 16 A | |
| Load Voltage | 400 V AC | |
| Mounting Type | Plug-in socket | |
| Manufacturer | Finder | |
| Series | 62 Series Power Relays | |
| Part number | 62.32.9.110.4040 | |
| Product type | Electromechanical power relay | |
| Contact configuration | 2 CO (DPDT) | |
| Number of poles | 2 | |
| Rated contact current | 16 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated load AC-1 | 4,000 VA | |
| Rated load AC-15 at 230 V AC | 750 VA | |
| Motor rating at 230 V AC | 0.8 kW | |
| DC-1 breaking capacity at 24 V DC | 16 A | |
| DC-1 breaking capacity at 110 V DC | 0.6 A | |
| DC-1 breaking capacity at 220 V DC | 0.4 A | |
| Nominal coil voltage | 110 V DC | |
| Coil supply type | DC | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Relay operating type | Monostable / non-latching | |
| Test button | Lockable | |
| Mechanical indicator | Included | |
| Mounting type | Plug-in / compatible socket mounting | |
| Connection type | Faston 187 terminals | |
| Terminal dimensions | 4.8 × 0.5 mm | |
| Compatible socket family | Finder 92 Series, subject to socket selection | |
| Insulation between coil and contacts | Reinforced | |
| Coil-to-contact clearance | 6 mm | |
| Coil-to-contact creepage distance | 8 mm | |
| Application | Industrial automation and electrical power switching |
Frequently Asked Questions
What is the Finder 62.32.9.110.4040 used for?
The Finder 62.32.9.110.4040 is a 16 A industrial power relay used for switching electrical circuits in automation equipment, machinery controls, lighting systems and industrial control panels.
What coil voltage does the Finder 62.32.9.110.4040 require?
The relay requires a nominal 110 V DC coil supply, making it suitable for compatible industrial DC control systems.
What is the contact configuration of this Finder relay?
The relay features 2 changeover contacts (2 CO / DPDT), allowing two separate electrical circuits to switch between normally open and normally closed contact positions.
Does the Finder 62.32.9.110.4040 have a test button?
Yes. The 4040 configuration includes a lockable test button and mechanical indicator, supporting manual testing and visual confirmation of relay operation during appropriate maintenance procedures.
Which sockets are compatible with the Finder 62.32.9.110.4040?
The relay uses Faston 187 terminals measuring 4.8 × 0.5 mm and can be installed with a suitable Finder 92 Series socket. The exact socket should be selected according to the relay configuration and installation requirements.
Trusted by Industrial Automation Professionals Worldwide
Finder 62 Series power relays provide dependable electrical switching solutions for industrial automation engineers, electrical panel builders and OEM equipment manufacturers requiring robust contact ratings, flexible circuit control and convenient maintenance features.
