62.32.9.048.4040 Finder Power relay 2pole 16A DC 48VNO

Finder 62.32.9.048.4040 – 30 A Industrial Power Relay, 48 V DC Coil, 2 NO

The Finder 62.32.9.048.4040 is a heavy-duty 30 A electromagnetic power relay from the Finder 62 Series, designed for reliable electrical switching in industrial automation, machinery control and power management equipment. Featuring a 48 V DC operating coil and two normally open contacts (2 NO / DPST-NO), this relay provides dependable two-pole switching for demanding electrical control applications.

With its 30 A switching current rating, silver tin oxide (AgSnO2) contact material and robust industrial construction, the Finder 62.32.9.048.4040 is particularly suitable for applications involving electrical heating, industrial machinery, lighting control and automated equipment. The relay allows two independent electrical circuits to be controlled simultaneously using a single DC control signal.

The relay combines a 48 V DC coil with approximately 1.3 W nominal coil consumption, a monostable electromagnetic mechanism and a wide operating temperature range. Its contact construction is designed to provide reliable switching performance in industrial environments where dependable operation and electrical separation between control and load circuits are essential.

Key Advantages

• High-current switching: 30 A contact rating for appropriately rated electrical loads.
• Two normally open contacts: Enables simultaneous switching of two separate circuits.
• 48 V DC control: Suitable for industrial systems using a 48 V DC control supply.
• Silver tin oxide contacts: AgSnO2 contact material supports demanding electrical switching applications.
• Low coil consumption: Approximately 1.3 W nominal DC coil power.
• Monostable operation: Contacts automatically return to their normally open positions when coil power is removed.
• Reinforced insulation: Supports electrical separation between coil and contact circuits.
• Wide temperature range: Suitable for operation from −40 to +70 °C.
• Industrial versatility: Suitable for heating, machinery, lighting and power control applications.
• Finder 62 Series reliability: Established electromagnetic relay technology for professional electrical equipment.

Key Features

• Finder 62 Series industrial power relay.
• Two normally open contacts (2 NO / DPST-NO / 2 Form A).
• 30 A rated switching current.
• 48 V DC nominal coil voltage.
• 1.8 kΩ nominal coil resistance.
• Approximately 1.3 W nominal coil consumption.
• Silver tin oxide (AgSnO2) contact material.
• 400 V AC maximum switching voltage.
• Monostable, non-latching electromagnetic operation.
• Reinforced insulation between coil and contacts.
• 6 kV impulse withstand voltage between coil and contacts.
• Operating temperature range of −40 to +70 °C.
• Designed for industrial automation and high-current electrical switching.
• Suitable for integration into appropriately rated industrial control assemblies.

Reliable High-Current Switching for Industrial Automation

The Finder 62.32.9.048.4040 uses an electromagnetic coil to operate two mechanically linked normally open contacts. When the 48 V DC coil receives its rated control supply, the relay closes both contacts, allowing current to flow through the connected electrical circuits. When coil power is removed, the monostable mechanism releases and the contacts return to their normally open positions. This provides predictable switching for automated machinery, electrical control panels and power management systems.

The Finder 62 Series is designed for industrial applications requiring robust electromechanical switching and practical control of electrical loads. The 62.32.9.048.4040 combines a 30 A switching rating, AgSnO2 contacts and a 48 V DC control coil to support demanding installations. Correct conductor sizing, circuit protection, load assessment and installation arrangements are essential, particularly when switching inductive loads, motors or equipment with high starting currents. The permissible switching current must always be assessed against the actual load characteristics.

Typical Applications

• Industrial automation: Switching electrical loads in automated production systems.
• Machinery control: Electrical switching in industrial manufacturing equipment.
• Industrial heating: Control of suitably rated heating elements and temperature control equipment.
• Lighting systems: Switching appropriately rated industrial and infrastructure lighting circuits.
• Power management: Auxiliary load switching in industrial electrical equipment.
• Control panels: Two-pole switching in industrial automation assemblies.
• Industrial furnaces and ovens: Electrical control of suitably rated heating circuits.
• OEM equipment: Integration into machinery and specialised electrical control systems.