62.32.9.024.4070 Finder Power relay 2pole 16A DC 24VNO

Why Choose the Finder 62.32.9.024.4070 Industrial Power Relay?

The Finder 62.32.9.024.4070 is an industrial electromechanical power relay from the established Finder 62 Series, designed for reliable electrical switching in industrial automation, machinery and control panel applications. Featuring a 24 V DC operating coil and two changeover contacts (2 CO / DPDT), this relay provides flexible switching for electrical control systems requiring both normally open and normally closed contact functions.

The Finder 62.32 configuration incorporates two independent changeover contact sets operated by a common electromagnetic coil. Each contact set transfers between its normally closed and normally open connections when the coil is energised, allowing two separate electrical circuits to change state simultaneously. This makes the relay suitable for auxiliary switching, electrical interlocking, control sequencing, industrial signalling and equipment control applications.

As part of the Finder 62 Series industrial power relay range, the 62.32.9.024.4070 combines electromechanical switching technology with a practical two-pole contact arrangement. Its 24 V DC coil supports compatible low-voltage DC control systems, while the 4070 ordering configuration identifies a specific product variant that should be matched when selecting or replacing an existing relay.

Key Advantages

• Two changeover contacts (2 CO / DPDT) provide flexible switching between normally open and normally closed circuits.
• 24 V DC nominal coil voltage supports compatible industrial DC control systems.
• Two independent contact sets enable simultaneous switching of separate electrical circuits.
• Electromechanical operation provides galvanic isolation between the operating coil and switched contacts.
• Changeover contacts support electrical interlocking, control sequencing and signal selection.
• Industrial power relay construction supports appropriately rated electrical loads.
• Non-latching operation allows the contacts to return to their normal positions when the coil is de-energised.
• Suitable for machinery control, industrial automation and auxiliary electrical switching.
• Established Finder 62 Series technology for industrial electrical installations.

Key Features

• Finder 62 Series industrial electromechanical power relay.
• Two changeover contacts (2 CO / DPDT).
• 24 V DC nominal operating coil.
• Two independently switched contact circuits.
• Normally open and normally closed contact functions.
• Electromagnetic, non-latching switching mechanism.
• Contact changeover when the operating coil is energised.
• Electrical separation between the control coil and switched circuits.
• Suitable for appropriately rated AC and DC switching applications.
• Industrial construction for auxiliary control and power switching.
• 4070 ordering configuration within the Finder 62 Series.

Flexible Two-Pole Changeover Switching for 24 V DC Control Systems

The Finder 62.32.9.024.4070 provides a practical method of controlling two separate electrical circuits using a common DC control signal. When its 24 V DC electromagnetic coil is energised, both changeover contacts transfer from their normally closed positions to their normally open positions. When the control voltage is removed, the contacts return to their original positions. This operating principle supports applications where one electrical connection must be interrupted while another is established.

The relay's two-pole changeover configuration makes it suitable for auxiliary equipment operation, control circuit selection, electrical interlocking and industrial signalling. Its electromechanical construction allows the DC control coil to operate electrically isolated contact circuits, subject to the applicable insulation and switching ratings. When specifying the 62.32.9.024.4070, engineers should verify the exact contact ratings, load characteristics, coil connection requirements and any special features associated with the 4070 ordering suffix.

Typical Applications

• Industrial machinery and automation control systems.
• Electrical control panels and relay assemblies.
• 24 V DC auxiliary control circuits.
• PLC-controlled auxiliary switching applications.
• Electrical interlocking and control sequencing.
• Industrial signalling and alarm circuits.
• Changeover switching between control signals.
• Building automation and HVAC control equipment.
• Motor control auxiliary circuits and contactor interfaces.
• Manufacturing and production automation installations.
• Control circuit isolation and auxiliary equipment switching.