Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.32.9.024.0006 Finder Power relay 2pole 16A DC 24V
Finder 62.32.9.024.0006 is a 16 A DPDT industrial power relay featuring two changeover contacts, a 24 V DC coil, a rear mounting flange and Faston 187 terminals.
This product has been superseded
A direct replacement is available below.
Replacement product
62.32.9.024.4006 Finder Power relay 2pole 16A DC 24VNO
SKU: 62.32.9.024.4006
View
Why Choose the Finder 62.32.9.024.0006 Power Relay?
The Finder 62.32.9.024.0006 is a robust 16 A industrial power relay designed for switching electrical loads in control panels, machinery and automation systems. Part of the established Finder 62 Series, it combines two changeover contacts with a 24 V DC coil and a rear mounting flange.
Its DPDT contact configuration provides two independently operated changeover contacts, allowing two circuits or control functions to be switched simultaneously. Reinforced insulation between the coil and contacts supports reliable electrical separation in demanding industrial control and machinery applications.
The 62.32.9.024.0006 supports a rated AC-1 load of 4,000 VA. Its rear flange enables secure direct mounting, while the 4.8 × 0.5 mm Faston 187 terminals provide convenient quick-connect wiring for installation and maintenance.
Key Advantages
- High-capacity 16 A power relay for industrial load switching.
- Two changeover contacts provide flexible DPDT circuit control.
- 24 V DC coil suitable for common industrial control systems.
- Rear flange enables secure direct mounting.
- Rated for switching loads up to 4,000 VA at AC-1.
- Reinforced coil-to-contact insulation enhances electrical separation.
- Faston 187 terminals enable straightforward quick-connect wiring.
Key Features
- Finder 62 Series industrial power relay.
- Two changeover contacts in a DPDT configuration.
- 16 A rated contact current.
- 24 V DC coil voltage.
- 250 V AC rated contact voltage.
- Maximum switching voltage of 400 V AC.
- Rear flange mounting configuration.
- Silver cadmium oxide contact material.
- Reinforced insulation between the coil and contacts.
- Faston 187 terminals measuring 4.8 × 0.5 mm.
Reliable Motor and Load Control
Industrial power relays allow a low-voltage control circuit to switch higher-current electrical loads while maintaining separation between the control and load sides. The Finder 62.32.9.024.0006 uses a 24 V DC coil to operate its two changeover contacts, making it suitable for controlling contactors, solenoid valves, lighting and auxiliary machinery.
Its reinforced coil-to-contact insulation incorporates a 6 mm clearance and an 8 mm creepage distance. The rear flange provides a secure direct-mounting solution, while the Faston quick-connect terminals simplify wiring and relay replacement.
Typical Applications
- Industrial control panels and switchgear.
- Machinery and production equipment.
- Motor control and contactor circuits.
- Heating, ventilation and air-conditioning systems.
- Pumps, fans and compressors.
- Lighting and electrical load control.
- Building automation systems.
- Solenoid valves and industrial actuators.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Load Voltage | 400 V AC | |
| Switching Current (A) | 16 A | |
| Coil / Supply Voltage | 24 V DC | |
| Contacts | 2 C/O | |
| HS Code | 85364900 | |
| Manufacturer | Finder | |
| Series | 62 Series | |
| Model | 62.32.9.024.0006 | |
| Product type | Industrial power relay | |
| Contact configuration | 2 CO (DPDT / 2 Form C) | |
| Rated contact current | 16 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated load AC-1 | 4,000 VA | |
| Rated load AC-15 at 230 V AC | 750 VA | |
| Motor rating at 230 V AC | 0.8 kW | |
| DC-1 breaking capacity at 24 V DC | 16 A | |
| DC-1 breaking capacity at 110 V DC | 0.6 A | |
| DC-1 breaking capacity at 220 V DC | 0.4 A | |
| Coil voltage | 24 V DC | |
| Rated coil power | 1.3 W | |
| Coil current | 54 mA | |
| Coil resistance | 445 Ω | |
| Coil operating range | 19.2–26.4 V DC | |
| Must-release voltage | 2.4 V DC | |
| Contact material | AgCdO | |
| Minimum switching load | 1,000 mW (10 V / 10 mA) | |
| Operate time | 11 ms | |
| Release time | 4 ms | |
| Mechanical life | 30 million cycles | |
| Electrical life at rated AC-1 load | 100,000 cycles | |
| Impulse withstand between coil and contacts | 6 kV | |
| Dielectric strength between open contacts | 1,500 V AC | |
| Coil-to-contact clearance | 6 mm | |
| Coil-to-contact creepage distance | 8 mm | |
| Ambient temperature range | −40 to +70 °C | |
| Mounting type | Rear flange mounting | |
| Termination | Faston 187 quick-connect terminals | |
| Terminal size | 4.8 × 0.5 mm | |
| Environmental protection | RT I |
Frequently Asked Questions
What is the Finder 62.32.9.024.0006 used for?
It is an industrial power relay used to switch electrical loads in machinery, control panels, building automation and other electrical control systems.
What coil voltage does this relay require?
The Finder 62.32.9.024.0006 has a 24 V DC coil with a rated power consumption of 1.3 W.
What contact configuration does the relay provide?
It provides two changeover contacts, also described as a DPDT or 2 Form C contact configuration, with a rated current of 16 A.
How does the rear flange version differ from the standard relay?
The rear flange allows the relay to be secured directly to a suitable mounting surface while retaining its Faston 187 quick-connect terminals.
How is the Finder 62.32.9.024.0006 connected?
The relay is wired through its 4.8 × 0.5 mm Faston 187 quick-connect terminals and can be secured using its rear mounting flange.
Trusted Industrial Relay Technology
Finder 62 Series power relays are designed to provide reliable high-current switching, reinforced electrical insulation and secure mounting for industrial machinery and automation systems.
