Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.32.9.012.4800 Finder Power relay 2pole 16A DC 12VNO
Finder 62.32.9.012.4800 is a 16 A DPST-NO magnetic blow power relay with a 12 V DC coil, designed for switching high-voltage resistive and inductive DC loads.
£15.72
Why Choose the Finder 62.32.9.012.4800 Magnetic Blow Power Relay?
The Finder 62.32.9.012.4800 is a specialised 16 A magnetic blow power relay designed for switching high-voltage resistive and inductive DC loads. Part of the robust Finder 62 Series, it combines two normally open contacts with a 12 V DC coil and an integrated magnetic blow-out system.
Its magnetic blow-out system helps extinguish the electrical arc produced when DC loads are disconnected, increasing the relay’s DC switching capability. The two-pole normally open configuration can switch resistive DC loads rated up to 16 A at 24 V DC, 12 A at 125 V DC or 6 A at 220 V DC.
The 62.32.9.012.4800 uses durable silver tin oxide contacts and supports plug-in installation with compatible Finder 92 Series sockets. Its 4.8 × 0.5 mm Faston 187 terminals also enable direct quick-connect wiring in industrial control and power-management systems.
Key Advantages
- Magnetic blow-out system supports high-voltage DC load switching.
- Two normally open contacts provide simultaneous control of two circuits.
- 12 V DC coil suitable for low-voltage control systems.
- Switches resistive loads up to 6 A at 220 V DC.
- Suitable for both resistive and inductive DC loads.
- Cadmium-free silver tin oxide contact material.
- Plug-in design supports convenient installation and replacement.
Key Features
- Finder 62 Series magnetic blow power relay.
- Two normally open contacts in a DPST-NO configuration.
- 16 A rated contact current.
- 12 V DC coil voltage.
- Integrated magnetic blow-out arc suppression.
- 250 V AC rated contact voltage.
- Maximum switching voltage of 400 V AC.
- Silver tin oxide contact material.
- Compatible with Finder 92 Series sockets.
- Faston 187 terminals measuring 4.8 × 0.5 mm.
Reliable High-Voltage DC Load Switching
Interrupting a DC circuit can produce a sustained electrical arc because the current does not naturally pass through zero as it does in an AC circuit. The magnetic blow-out system in the Finder 62.32.9.012.4800 directs and lengthens this arc, helping it extinguish more rapidly when the contacts open.
This design allows the relay to switch substantially higher DC voltages and currents than a conventional power relay. It is suitable for compatible battery systems, DC motors, industrial power supplies, photovoltaic equipment and other resistive or inductive DC applications.
Typical Applications
- High-voltage DC control circuits.
- Battery and energy-storage systems.
- Photovoltaic and renewable-energy equipment.
- DC motors, actuators and solenoid valves.
- Industrial power supplies and converters.
- Electric power control and management systems.
- Industrial machinery and control panels.
- Resistive and inductive DC load switching.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Mounting Type | Plug-in socket | |
| Switching Current (A) | 16 A | |
| Load Voltage | 400 V AC | |
| Coil / Supply Voltage | 12 V DC | |
| Contacts | 4NO | |
| HS Code | 85364900 | |
| Manufacturer | Finder | |
| Series | 62 Series | |
| Model | 62.32.9.012.4800 | |
| Product type | Magnetic blow power relay | |
| Contact configuration | 2 NO (DPST-NO) | |
| Contact gap | ≥2.1 mm | |
| Rated contact current | 16 A | |
| Maximum peak current | 30 A for 5 ms | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated load AC-1 | 4,000 VA | |
| DC-1 breaking capacity at 24 V DC | 16 A | |
| DC-1 breaking capacity at 125 V DC | 12 A | |
| DC-1 breaking capacity at 220 V DC | 6 A | |
| Inductive DC breaking capacity at 24 V DC | 10 A at L/R = 40 ms | |
| Inductive DC breaking capacity at 125 V DC | 2 A at L/R = 40 ms | |
| Inductive DC breaking capacity at 220 V DC | 1.2 A at L/R = 40 ms | |
| Coil voltage | 12 V DC | |
| Rated coil power | 1.3 W | |
| Coil current | 109 mA | |
| Coil resistance | 110 Ω | |
| Coil operating range | 10.2–13.2 V DC | |
| Contact material | AgSnO2 | |
| Minimum switching load | 1,000 mW (10 V / 10 mA) | |
| Arc suppression | Magnetic blow-out system | |
| Operate time | 16 ms | |
| Release time | 5 ms | |
| Mechanical life | 10 million cycles | |
| Electrical life at rated DC-1 load | 100,000 cycles | |
| Impulse withstand between coil and contacts | 6 kV | |
| Dielectric strength between open contacts | 2,000 V AC | |
| Ambient temperature range | −40 to +70 °C | |
| Mounting type | Plug-in / socket mounting | |
| Termination | Faston 187 quick-connect terminals | |
| Terminal size | 4.8 × 0.5 mm | |
| Environmental protection | RT I |
Frequently Asked Questions
What is the Finder 62.32.9.012.4800 used for?
It is designed for switching high-voltage resistive and inductive DC loads in industrial control, energy-management and automation systems.
What does the magnetic blow-out system do?
The magnetic blow-out system helps extinguish the electrical arc formed when a DC load is disconnected, increasing the relay’s DC switching capability.
What coil voltage does this relay require?
The Finder 62.32.9.012.4800 has a 12 V DC coil with a rated power consumption of 1.3 W.
What DC loads can the relay switch?
For resistive DC-1 loads, it can switch up to 16 A at 24 V DC, 12 A at 125 V DC or 6 A at 220 V DC.
How is the Finder 62.32.9.012.4800 installed?
The relay plugs into a compatible Finder 92 Series socket and can also connect through its 4.8 × 0.5 mm Faston 187 terminals.
Trusted High-Voltage DC Relay Technology
Finder magnetic blow power relays provide dependable switching for demanding resistive and inductive DC loads, combining effective arc suppression with robust industrial construction.
