Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.32.8.120.0300 Finder Power relay 2pole 16A 120V
62.32.8.120.0300 Finder Power relay 2pole 16A 120V.
This product has been discontinued
A direct replacement is available below.
Replacement product
62.32.8.120.4300 Finder Power relay 2pole 16A 120V
SKU: 62.32.8.120.4300
View
Why Choose the Finder 62.32.8.120.0300 Industrial Power Relay?
The Finder 62.32.8.120.0300 is a robust 16 A, 2-pole normally open (DPST-NO) industrial power relay designed for dependable electrical switching in industrial automation, machinery control and electrical installations. As part of the established Finder 62 Series power relays, it provides reliable electromechanical switching for industrial control panels, electrical equipment and automated systems.
Featuring a 120 V AC operating coil and two normally open contacts rated at 16 A, this relay enables two electrical circuits to be switched simultaneously using a single control signal. Its silver cadmium oxide (AgCdO) contact material is suitable for industrial switching duties, while the normally open contact arrangement allows connected circuits to remain open until the relay coil is energised.
The Finder 62.32.8.120.0300 combines a practical plug-in construction with quick-connect terminals for straightforward installation and servicing. Designed for use with a compatible relay socket, it is suitable for electrical control cabinets, industrial machinery and equipment requiring reliable two-pole switching. Its 16 A contact rating and 120 V AC coil make it particularly useful in industrial systems requiring higher-current switching from an AC control circuit.
Key Advantages
- Robust 16 A industrial power relay for electrical control and automation applications.
- Two normally open contacts (DPST-NO) enable simultaneous switching of two circuits.
- 120 V AC operating coil for appropriately rated AC control systems.
- 250 V AC rated contact voltage for common industrial switching applications.
- 400 V AC maximum switching voltage for suitable electrical loads.
- Silver cadmium oxide (AgCdO) contacts provide dependable electromechanical switching.
- Electrical isolation between the control coil and switched contact circuits.
- Plug-in construction supports convenient installation, maintenance and replacement.
- 4.8 mm quick-connect terminals provide a practical electrical connection arrangement.
- Non-latching operation automatically opens the normally open contacts when the coil is de-energised.
Key Features
- Finder 62 Series industrial power relay.
- 2 NO (DPST-NO) contact configuration with two normally open contacts.
- 16 A nominal contact current.
- 120 V AC nominal coil voltage.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- AgCdO contact material for industrial electrical switching.
- Electromagnetic, monostable switching mechanism.
- Plug-in and quick-connect terminal arrangement.
- Two mechanically linked normally open contact sets.
- Suitable for installation using a compatible relay socket.
- Electrical isolation between the coil and contact circuits.
- Compact industrial construction for electrical control cabinets.
- Suitable for auxiliary switching, machinery control and industrial automation equipment.
Reliable Two-Pole Switching for Industrial Control Systems
Electromechanical power relays such as the Finder 62.32.8.120.0300 operate by energising an electromagnetic coil to move mechanically linked electrical contacts. When the 120 V AC coil is energised, the relay closes its two normally open contacts, allowing two connected electrical circuits to be switched simultaneously. When the coil is de-energised, the contacts return to their normally open positions.
The Finder 62 Series is designed for industrial switching applications where dependable contact operation, electrical isolation and straightforward installation are important. The two-pole normally open arrangement makes this relay particularly suitable for switching electrical loads, controlling auxiliary circuits and interfacing industrial automation equipment with higher-current electrical devices.
With its 16 A contact rating, robust electromechanical construction and convenient plug-in terminal arrangement, the 62.32.8.120.0300 provides a practical switching solution for industrial control panels, electrical equipment and automated machinery. The relay is listed as discontinued, making exact part-number identification particularly important when sourcing replacement units or assessing compatible alternatives.
Typical Applications
- Industrial automation and machinery control systems.
- Electrical control panels and switching assemblies.
- Motor starter and contactor control circuits.
- Industrial heating and electrical load switching.
- Conveyor and material handling machinery.
- Building automation and electrical control systems.
- Industrial lighting and equipment control circuits.
- Heating, ventilation and air conditioning control equipment.
- Electrical interlocking and auxiliary control circuits.
- Manufacturing equipment and OEM automation machinery.
- Two-pole normally open electrical switching applications.
- Maintenance and replacement of existing Finder 62 Series relay installations.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | Faston / flat-pin | |
| Load Voltage | 400 V AC | |
| Mounting Type | Plug-in socket | |
| Switching Current (A) | 16 A | |
| Manufacturer | Finder | |
| Series | 62 Series Power Relays | |
| Model | 62.32.8.120.0300 | |
| Product type | Industrial electromechanical power relay | |
| Contact configuration | 2 NO (DPST-NO), two normally open contacts | |
| Number of poles | 2 | |
| Rated contact current | 16 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Maximum listed switching load | 6,400 VA | |
| Nominal coil voltage | 120 V AC | |
| Coil supply type | Alternating current (AC) | |
| Rated coil current | 24 mA | |
| Coil resistance | approximately 1.35 kΩ | |
| Must-operate voltage | 106 V AC | |
| Must-release voltage | 24 V AC | |
| Coil operation | Non-latching, monostable | |
| Contact material | Silver cadmium oxide (AgCdO) | |
| Switching mechanism | Electromagnetic | |
| Terminal type | Plug-in / quick-connect | |
| Quick-connect terminal width | approximately 4.8 mm | |
| Mounting type | Socket mounting | |
| Operating time | 15 ms | |
| Release time | 3 ms | |
| Operating temperature | −40 to +50 °C | |
| Listed approvals | CCC, CE, CSA, cURus, EAC, ENEC, RINA, UKCA and VDE | |
| Product lifecycle status | Obsolete / discontinued |
Frequently Asked Questions
What is the Finder 62.32.8.120.0300 used for?
The Finder 62.32.8.120.0300 is an industrial electromechanical power relay designed for switching electrical circuits in automation systems, machinery control panels and industrial installations. Its two normally open contacts allow two electrical circuits to be switched simultaneously using a single control signal.
What coil voltage does the Finder 62.32.8.120.0300 require?
The relay operates using a 120 V AC coil. It is intended for control systems providing an appropriately rated alternating-current supply and should not be connected directly to a DC coil supply.
What is the contact rating of the Finder 62.32.8.120.0300?
The relay features two normally open contacts rated at 16 A, with a rated contact voltage of 250 V AC and a maximum switching voltage of 400 V AC. The permissible switching capacity depends on the load type, voltage and operating conditions.
What does the DPST-NO contact configuration mean?
DPST-NO stands for double-pole single-throw, normally open. The Finder 62.32.8.120.0300 contains two normally open contact sets that close when the relay coil is energised and open again when the coil is de-energised. Unlike a changeover relay, this configuration does not provide normally closed switching contacts.
What contact material does this relay use?
The Finder 62.32.8.120.0300 uses silver cadmium oxide (AgCdO) contacts, a contact material used in industrial electromechanical switching applications. The material should be considered when assessing environmental compliance and selecting suitable replacement relays.
How is the Finder 62.32.8.120.0300 installed?
The relay features a plug-in connection with approximately 4.8 mm quick-connect terminals and is designed for socket mounting. It can be installed in suitable industrial control panels and electrical equipment using a compatible relay socket.
Is the Finder 62.32.8.120.0300 still manufactured?
The Finder 62.32.8.120.0300 is listed as an obsolete or discontinued product. Replacement selection should consider the 120 V AC coil, two normally open contacts, 16 A contact rating, terminal arrangement and mounting compatibility.
Trusted by Industrial Automation Professionals Worldwide
Finder 62 Series power relays are designed to provide dependable electromechanical switching for industrial automation, machinery control and electrical installations. With its two normally open contacts, 16 A contact rating, 120 V AC coil and practical plug-in construction, the Finder 62.32.8.120.0300 remains a relevant component for maintaining compatible industrial electrical control systems.
