62.32.8.024.4000 Finder Power relay 2pole 16A 24V

Why Choose the Finder 62.32.8.024.4000 Industrial Power Relay?

The Finder 62.32.8.024.4000 is an industrial electromechanical power relay from the established Finder 62 Series, designed for dependable electrical switching in industrial automation, machinery and control panel applications. Featuring a 24 V AC operating coil and two changeover contacts (2 CO / DPDT), this relay provides flexible switching for applications requiring both normally open and normally closed contact functions.

The Finder 62.32 configuration features two independent changeover contact sets operated by a common electromagnetic coil. Each contact set can transfer between normally closed and normally open connections, allowing the relay to perform auxiliary switching, electrical interlocking, signal selection and control circuit changeover functions.

As part of the Finder 62 Series power relay family, the 62.32.8.024.4000 combines industrial switching capability with a practical two-pole contact arrangement. Its 24 V AC coil is suitable for compatible low-voltage AC control systems, while the 4000 ordering configuration identifies a particular variant within the range.

Key Advantages

• Two changeover contacts (2 CO / DPDT) provide flexible switching between normally open and normally closed circuits.
• 24 V AC nominal coil voltage supports compatible industrial AC control systems.
• Two independent contact sets allow multiple switching functions from a single control signal.
• Electromechanical operation provides galvanic isolation between the operating coil and switched circuits.
• Changeover contacts are suitable for electrical interlocking, control sequencing and signal selection.
• Industrial power relay construction supports appropriately rated electrical loads.
• Suitable for machinery control, industrial automation and auxiliary switching applications.
• Established Finder 62 Series technology for industrial electrical installations.

Key Features

• Finder 62 Series industrial electromechanical power relay.
• Two changeover contacts (2 CO / DPDT).
• 24 V AC nominal operating coil.
• Two independently switched contact circuits.
• Normally open and normally closed contact functions.
• Electromagnetic, non-latching operating mechanism.
• Contact changeover when the operating coil is energised.
• Electrical isolation between the control coil and contact circuits.
• Suitable for appropriately rated AC and DC switching applications.
• Industrial construction for auxiliary control and power switching.
• 4000 ordering configuration within the Finder 62 Series.

Flexible Two-Pole Changeover Switching for Industrial Control Systems

The Finder 62.32.8.024.4000 provides a practical method of switching two separate electrical circuits using a common AC control signal. When its 24 V AC electromagnetic coil is energised, both changeover contacts transfer from their normally closed positions to their normally open positions. When the control voltage is removed, the contacts return to their original positions. This arrangement is particularly useful where a control circuit must disconnect one connection while establishing another.

Its two-pole changeover configuration makes the relay suitable for industrial control applications requiring signal changeover, electrical interlocking and coordinated auxiliary switching. The complete 62.32.8.024.4000 ordering code should be checked when selecting a replacement, particularly where contact materials, load ratings or special variant characteristics may affect compatibility.

Typical Applications

• Industrial machinery and automation control systems.
• Electrical control panels and relay assemblies.
• 24 V AC auxiliary control circuits.
• Electrical interlocking and control sequencing.
• Industrial signalling and alarm circuits.
• Changeover switching between control signals.
• Building automation and HVAC control equipment.
• Motor control auxiliary circuits and contactor interfaces.
• Manufacturing and production automation installations.
• Control circuit isolation and auxiliary equipment switching.