62.23.9.060.4000 Finder Power relay 3 pole 16A DC 60V

Why Choose the Finder 62.23.9.060.4000 Power Relay?

The Finder 62.23.9.060.4000 is a robust 16 A three-pole electromechanical power relay designed for dependable switching in industrial automation, machinery control and electronic equipment. Part of the established Finder 62 Series power relay range, this model combines a 60 V DC operating coil, three changeover contacts and durable silver tin oxide contact technology for reliable operation in industrial electrical systems.

Featuring a 3PDT (three-pole double-throw) contact configuration, the relay allows three independent electrical circuits to be switched simultaneously using a single control signal. Each changeover contact provides a common, normally open and normally closed connection, making the relay suitable for control logic, electrical interlocking and auxiliary switching applications. Its silver tin oxide (AgSnO2) contacts provide good resistance to contact welding and support dependable switching of suitable industrial loads.

With a 16 A rated contact current, 250 V AC rated contact voltage and 60 V DC nominal coil voltage, the Finder 62.23.9.060.4000 is suitable for industrial control equipment, machinery automation and power switching assemblies. Its printed circuit board mounting arrangement enables direct integration into electronic control systems, while reinforced insulation between the coil and contacts supports electrical separation within industrial equipment.

Key Advantages

• Reliable 16 A electromechanical power relay for industrial automation and electrical switching.
• 60 V DC operating coil for compatible direct-current control circuits.
• Three changeover contacts (3 CO / 3PDT) enable simultaneous switching of three independent electrical circuits.
• 16 A rated contact current supports demanding industrial control applications.
• 250 V AC rated contact voltage for suitable electrical switching loads.
• 4,000 VA rated resistive switching capacity (AC1).
• Silver tin oxide (AgSnO2) contacts provide resistance to contact welding and reliable switching performance.
• Reinforced insulation between coil and contacts supports electrical safety in equipment design.
• PCB mounting allows direct integration into industrial electronic control assemblies.
• Three-pole changeover arrangement provides flexible normally open and normally closed switching functions.
• Monostable operation returns the contacts to their normal positions when the coil is de-energised.
• Suitable for machinery control, industrial automation, electrical interlocking and auxiliary switching circuits.

Key Features

• Finder 62 Series power relay.
• 62.23 three-pole PCB mounting configuration.
• 60 V DC nominal coil voltage.
• Three changeover contacts (3 CO / 3PDT).
• 16 A rated contact current.
• 250 V AC rated contact voltage.
• 400 V AC maximum switching voltage.
• 4,000 VA rated resistive switching load (AC1).
• 750 VA rated AC15 load at 230 V AC.
• Silver tin oxide (AgSnO2) contact material.
• 1.3 W nominal DC coil power consumption.
• 48–66 V DC coil operating range.
• 11 ms typical operating time.
• 4 ms typical release time.
• 6 kV rated impulse withstand voltage between coil and contacts.
• Reinforced coil-to-contact insulation with 6 mm clearance and 8 mm creepage distance.
• PCB through-hole mounting for industrial electronic assemblies.
• Robust electromechanical construction for dependable industrial switching.

Reliable Three-Pole Switching for Industrial Control Systems

Electromechanical power relays such as the Finder 62.23.9.060.4000 provide a dependable method of controlling electrical circuits through an electromagnetic switching mechanism. When the 60 V DC coil is energised, the internal armature changes the state of the relay's three changeover contacts. Each common contact transfers between its normally closed and normally open positions, allowing connected electrical circuits to be controlled through a single coil signal. When the coil supply is removed, the contacts return to their normal positions.

The Finder 62 Series is designed for industrial applications requiring high switching capacity, durable construction and reliable electrical isolation. The 62.23.9.060.4000 combines 16 A silver tin oxide changeover contacts with reinforced coil-to-contact insulation and a compact PCB mounting arrangement. This makes it suitable for OEM equipment manufacturers, automation engineers and electronic control system designers requiring reliable multi-circuit switching within industrial equipment.

Typical Applications

• Industrial automation and machinery control systems.
• Printed circuit board-based power switching assemblies.
• Industrial electrical control panels and electronic equipment.
• Motor control and auxiliary switching circuits within the relay's specified ratings.
• Electrical interlocking and multi-circuit control systems.
• Heating and electrical load switching equipment.
• Industrial process control and manufacturing automation.
• Control of contactors, actuators and auxiliary electrical equipment.
• Industrial signalling, monitoring and alarm circuits.
• Building automation and electrical control installations.
• OEM electronic equipment and industrial control board manufacturing.