62.23.8.024.4000 Finder Power relay 3 pole 16A 24V

Why Choose the Finder 62.23.8.024.4000 Power Relay?

The Finder 62.23.8.024.4000 is a robust and reliable 16 A three-pole electromechanical power relay designed for electrical switching in industrial automation, machinery control and electronic equipment. As part of the established Finder 62 Series power relay range, it combines a 24 V AC operating coil, three changeover contacts and durable silver tin oxide contact technology to provide dependable switching performance in demanding industrial environments.

Featuring a 3PDT (three-pole double-throw) contact configuration, the relay allows three independent electrical circuits to be switched simultaneously using a single control signal. Its silver tin oxide (AgSnO2) contacts provide good resistance to contact welding and are particularly suitable for applications involving demanding electrical loads and switching conditions. Reinforced insulation between the coil and contacts supports safe integration into industrial electronic assemblies.

With a 16 A rated contact current, 250 V AC rated contact voltage and 24 V AC nominal coil voltage, the Finder 62.23.8.024.4000 is suitable for industrial control circuits, auxiliary switching, motor control and electrical machinery. Its 11-pin printed circuit board mounting arrangement allows direct integration into electronic control assemblies, while the compact construction helps optimise space within industrial equipment.

Key Advantages

• Reliable 16 A electromechanical power relay for industrial automation and electrical control applications.
• 24 V AC operating coil compatible with industrial alternating-current control circuits.
• Three changeover contacts (3 CO / 3PDT) enable simultaneous switching of three independent circuits.
• 16 A rated contact current for demanding industrial electrical loads.
• 250 V AC rated contact voltage suitable for electrical switching and control applications.
• 4,000 VA rated resistive switching capacity (AC1).
• Silver tin oxide (AgSnO2) contacts provide improved resistance to contact welding.
• Reinforced insulation between coil and contacts supports electrical separation and equipment protection.
• PCB mounting allows direct integration into industrial electronic control assemblies.
• Three-pole changeover configuration provides flexible normally open and normally closed switching arrangements.
• Compact construction helps reduce installation space within electronic equipment.
• Suitable for machinery control, industrial automation, motor switching and auxiliary electrical circuits.

Key Features

• Finder 62 Series power relay.
• 62.23 three-pole PCB mounting configuration.
• 24 V AC nominal coil voltage.
• 50 / 60 Hz AC coil operation.
• Three changeover contacts (3 CO / 3PDT).
• 16 A rated contact current.
• 30 A maximum peak contact current under specified conditions.
• 250 V AC rated contact voltage.
• 400 V AC maximum switching voltage.
• 4,000 VA rated resistive load (AC1).
• 750 VA rated AC15 load at 230 V AC.
• Silver tin oxide (AgSnO2) contact material.
• 2.2 VA nominal AC coil power consumption at 50 Hz.
• 19.2–26.4 V AC coil operating range.
• 11 ms typical operating time.
• 4 ms typical release time.
• 6 kV rated impulse withstand voltage between coil and contacts.
• Reinforced coil-to-contact insulation with 6 mm clearance and 8 mm creepage distance.
• 11-pin PCB through-hole mounting for electronic control assemblies.
• Robust electromechanical construction for industrial switching applications.

Reliable Three-Pole Switching for Industrial Machinery

Electromechanical power relays such as the Finder 62.23.8.024.4000 provide a dependable method of controlling electrical loads through an electromagnetic switching mechanism. When the 24 V AC coil is energised, the relay's internal armature changes the state of its three changeover contacts, allowing connected circuits to be switched according to the control signal. When the coil is de-energised, the contacts return to their normal positions.

The Finder 62 Series is designed for industrial applications requiring high switching capacity, robust construction and reliable contact operation. The 62.23.8.024.4000 combines 16 A changeover contacts, durable silver tin oxide contact technology and reinforced insulation between the coil and contacts. Its PCB mounting arrangement makes it suitable for OEM equipment manufacturers, industrial automation engineers and electronic control system designers requiring reliable switching within compact assemblies.

Typical Applications

• Industrial automation and machinery control systems.
• Printed circuit board-based electrical switching assemblies.
• Industrial electrical control panels and electronic equipment.
• Motor control and auxiliary switching circuits within the relay's rated capacity.
• Heating and electrical load switching equipment.
• Industrial process control and manufacturing automation.
• Control of contactors, actuators and auxiliary electrical equipment.
• Electrical interlocking and multi-circuit control systems.
• Industrial signalling and monitoring circuits.
• Building automation and electrical control installations.
• OEM electronic equipment and industrial control board manufacturing.