Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
62.22.9.048.4300 Finder Power relay 2pole 16A DC 48V
Finder 62.22.9.048.4300 is a 16 A industrial electromechanical power relay featuring a 48 V DC coil, two normally open contacts, silver tin oxide contact material and PCB mounting for industrial electrical switching and automation applications.
Why Choose the Finder 62.22.9.048.4300 Power Relay?
The Finder 62.22.9.048.4300 is a robust industrial 16 A electromechanical power relay designed for dependable electrical switching in industrial automation, machinery control and electronic power management systems. As part of the established Finder 62 Series, this relay features 2 normally open contacts (DPST-NO) and a 48 V DC operating coil, providing reliable control of two electrical circuits from a single control signal.
The Finder 62 Series is developed for applications requiring high switching capacity, reliable electrical insulation and long-term operational performance. The 62.22 PCB-mounted configuration allows direct integration into printed circuit boards and industrial electronic assemblies. Its silver tin oxide (AgSnO2) contacts are particularly suitable for applications involving elevated inrush currents, including appropriately rated lighting and electrical power switching systems.
With a 16 A rated contact current, 250 V AC rated contact voltage and 48 V DC coil supply, the Finder 62.22.9.048.4300 provides a practical solution for switching industrial electrical loads. Its 2-pole normally open contact arrangement and compact PCB-mounted construction make it suitable for OEM equipment manufacturers, automation engineers and industrial electronic control system designers.
Key Advantages
- Reliable 16 A industrial power relay for electrical switching applications.
- 2 normally open contacts (DPST-NO) enable simultaneous switching of two circuits.
- 48 V DC operating coil suitable for industrial DC control systems.
- Silver tin oxide (AgSnO2) contacts provide improved suitability for loads with high inrush currents.
- 250 V AC rated contact voltage for industrial electrical applications.
- PCB-mounted construction supports integration into electronic control equipment.
- Electromechanical switching provides electrical separation between control and load circuits.
- Suitable for industrial automation, lighting, heating and electrical power management systems.
Key Features
- Finder 62 Series industrial electromechanical power relay.
- 16 A nominal contact current.
- 2 NO (DPST-NO) contact configuration.
- 48 V DC nominal coil voltage.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- 4,000 VA rated AC-1 switching load.
- Silver tin oxide (AgSnO2) contact material.
- PCB through-hole mounting for industrial electronic assemblies.
- Electromechanical, non-latching switching mechanism.
- Electrical insulation between the coil and contact circuits.
- Suitable for switching resistive and appropriately rated inductive or high-inrush loads.
- Designed for industrial automation and OEM equipment integration.
Reliable Power Switching for Industrial Automation
Industrial power relays such as the Finder 62.22 use an electromagnetically operated switching mechanism to control electrical loads. When the 48 V DC coil is energised, the relay's normally open contacts close, allowing current to flow through the connected load circuits. When the coil is de-energised, the contacts return to their normally open positions, interrupting the switched circuits.
The Finder 62 Series is suitable for automation engineers, electrical equipment manufacturers and industrial control system designers requiring dependable switching performance. The AgSnO2 contact configuration is particularly useful for applications involving higher initial switching currents, while the PCB-mounted design enables integration into industrial controllers, lighting equipment, heating systems and power management assemblies. The connected load must remain within the relay's applicable electrical ratings.
Typical Applications
- Industrial automation and machinery control equipment.
- Electrical power management and switching systems.
- Industrial and commercial lighting control circuits.
- Heating equipment and electrical temperature control systems.
- Burners, boilers and industrial oven controls.
- Electrical distribution and auxiliary switching circuits.
- PCB-based industrial electronic controllers.
- OEM equipment and industrial electrical assemblies.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Power Relay | |
|---|---|---|
| Terminal Type | PCB / pins | |
| Load Voltage | 400 V AC | |
| Mounting Type | PCB | |
| Switching Current (A) | 16 A | |
| Manufacturer | Finder | |
| Series | 62 Series Power Relays | |
| Model | 62.22.9.048.4300 | |
| Product type | Electromechanical power relay | |
| Contact configuration | 2 NO (DPST-NO) | |
| Number of poles | 2 | |
| Rated contact current | 16 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated load AC-1 | 4,000 VA | |
| Nominal coil voltage | 48 V DC | |
| Coil supply type | DC | |
| Contact material | Silver tin oxide (AgSnO2) | |
| Contact operation | Normally open | |
| Relay operating type | Monostable / non-latching | |
| Switching mechanism | Electromechanical | |
| Mounting type | PCB through-hole mounting | |
| Connection type | PCB pins | |
| Application | Industrial power switching and automation control |
Frequently Asked Questions
What is the Finder 62.22.9.048.4300 used for?
The Finder 62.22.9.048.4300 is a 16 A industrial electromechanical power relay used for switching electrical loads in industrial automation, lighting control, heating equipment and electronic power management systems.
What coil voltage does this Finder relay require?
The relay operates with a nominal 48 V DC coil supply, making it suitable for compatible industrial DC control circuits and electronic control equipment.
What is the contact configuration of this relay?
The Finder 62.22.9.048.4300 features 2 normally open contacts (2 NO / DPST-NO), allowing two separate electrical circuits to be switched simultaneously when the relay coil is energised.
What contact material does the Finder 62.22.9.048.4300 use?
The relay uses silver tin oxide (AgSnO2) contacts, which are suitable for electrical switching applications involving elevated inrush currents, subject to the relay's specified load ratings.
Where is the Finder 62.22.9.048.4300 typically installed?
The relay features a PCB through-hole mounting design and is typically incorporated into industrial electronic control assemblies, OEM equipment, lighting controllers and electrical switching systems.
Trusted by Industrial Automation Professionals Worldwide
Finder 62 Series power relays are widely used by electrical engineers, automation specialists and OEM equipment manufacturers to provide dependable electrical switching, robust load control and reliable performance in industrial power and automation applications.
