62.22.8.048.4300 Finder Power relay 2pole 16A 48V

Why Choose the Finder 62.22.8.048.4300 Industrial Power Relay?

The Finder 62.22.8.048.4300 is a high-performance 16 A industrial PCB-mounted power relay designed for reliable electrical switching in industrial automation, machinery and power control applications. Featuring a 48 V AC operating coil and two normally open (2 NO) contacts, this relay provides dependable switching of two electrical circuits from a single control signal. As part of the established Finder 62 Series power relay range, it combines robust construction, high switching capacity and reinforced electrical insulation.

The 62.22-4300 configuration is specifically designed with a double-pole single-throw normally open (DPST-NO) contact arrangement and a contact gap of at least 3 mm. Unlike the standard 62.22 changeover version, this model uses two normally open contacts intended for applications requiring greater contact separation. Its silver tin oxide (AgSnO2) contacts provide robust switching performance, particularly where electrical loads generate significant inrush currents.

With a 16 A rated contact current, 48 V AC coil supply and 4000 VA rated AC-1 switching capacity, the Finder 62.22.8.048.4300 is suitable for industrial heating equipment, lighting control, electrical power management and automated machinery. Its PCB mounting design allows direct integration into electronic control assemblies, making it a practical choice for OEM manufacturers and industrial equipment designers.

Key Advantages

• Robust 16 A industrial power relay designed for demanding electrical switching applications.
• 48 V AC operating coil suitable for compatible industrial AC control circuits.
• DPST-NO (2 NO) contact configuration enables simultaneous switching of two independent circuits.
• Minimum 3 mm contact gap provides enhanced separation between open contacts.
• Silver tin oxide (AgSnO2) contacts offer robust switching performance for demanding loads.
• 4000 VA AC-1 rated switching capacity supports high-current resistive applications.
• High peak current capability helps accommodate short-duration inrush currents within specified limits.
• Reinforced insulation between coil and contacts supports electrical safety in control equipment.
• PCB mounting construction enables direct integration into electronic control assemblies.
• Suitable for industrial lighting, heating, power management and machinery control applications.

Key Features

• Finder 62 Series industrial power relay.
• 62.22-4300 PCB-mounted normally open configuration.
• 16 A rated switching current.
• 48 V AC nominal coil voltage.
• 50/60 Hz AC coil operation.
• 2 NO / DPST-NO contact arrangement.
• Minimum 3 mm open contact gap.
• 250 V AC rated contact voltage.
• 400 V AC maximum switching voltage.
• 4000 VA rated switching capacity for AC-1 resistive loads.
• Silver tin oxide (AgSnO2) contact material.
• 120 A maximum peak contact current for 5 ms, subject to the manufacturer's specified conditions.
• 3 VA nominal AC coil consumption for the normally open configuration.
• Electromagnetic, non-latching switching operation.
• Two independently switched normally open contact circuits.
• Reinforced insulation between coil and contact circuits.
• 6 mm clearance and 8 mm creepage distance between coil and contacts.
• Direct printed circuit board mounting.
• Suitable for industrial equipment requiring high-current switching and enhanced contact separation.

High-Current Switching with Enhanced Contact Separation

The Finder 62.22.8.048.4300 uses an electromagnetic switching mechanism to control two normally open electrical circuits. When the 48 V AC coil is energised, both normally open contacts close, allowing current to flow through their respective circuits. When the coil supply is removed, the contacts return to their open positions. The DPST-NO arrangement is particularly useful where two circuits must be energised together without requiring changeover contacts.

The Finder 62 Series is designed for industrial applications requiring high switching currents, reliable insulation and durable electrical contacts. The 62.22-4300 variant provides a contact gap of at least 3 mm, making it suitable for equipment designs that require enhanced open-contact separation. Its silver tin oxide contacts and high short-duration peak current capability make it a practical choice for switching resistive loads and equipment with demanding inrush characteristics, provided the relevant manufacturer load ratings are observed.

Typical Applications

• Industrial heating equipment and electric furnaces.
• Commercial ovens, burners and boiler control systems.
• Road lighting and tunnel lighting control equipment.
• Industrial lighting switching and distribution circuits.
• Electrical power management and control equipment.
• PCB-based industrial automation controllers.
• Industrial machinery and production equipment.
• Power switching circuits in OEM electronic assemblies.
• Building services and HVAC control equipment.
• Electrical distribution and load control systems.
• Automated manufacturing and process control installations.
• Equipment requiring two normally open contacts with enhanced contact separation.