60.13.9.125.2000 Finder General purpose relay 3 pole 10A DC 125V

Q: What is the Finder 60.13.9.125.2000 used for?

The Finder 60.13.9.125.2000 is an industrial electromechanical relay designed for switching electrical circuits in automation systems, machinery control panels and industrial installations. Its three changeover contacts allow multiple circuits to be controlled using a single relay.

Q: What coil voltage does the Finder 60.13.9.125.2000 require?

The relay uses a 125 V DC coil. It is intended for control systems that provide an appropriately rated direct-current supply and should not be connected directly to an AC coil supply.

Q: What is the contact rating of the Finder 60.13.9.125.2000?

The relay features three changeover contacts rated at 10 A, with a rated contact voltage of 250 V AC. Actual switching capacity depends on the electrical load, voltage and operating conditions, particularly when switching DC loads.

Q: What does the 3PDT contact configuration mean?

3PDT stands for three-pole double-throw. The Finder 60.13.9.125.2000 contains three independent changeover contact sets, each providing a common, normally open and normally closed connection. All three contact sets change state when the relay coil is energised.

Q: How is the Finder 60.13.9.125.2000 installed?

The relay features an 11-pin plug-in connection and is designed for installation using compatible Finder 90 Series relay sockets. This arrangement allows convenient installation and replacement in electrical control panels and industrial automation equipment.

60.13.9.125.2000 Finder General purpose relay 3 pole 10A DC 125V.

SKU: 60.13.9.125.2000Alt SKU: 601391252000MPN: 60.13.9.125.2000

Why Choose the Finder 60.13.9.125.2000 Industrial Power Relay?

The Finder 60.13.9.125.2000 is a versatile 3-pole changeover (3PDT) industrial electromechanical relay designed for dependable electrical switching in industrial automation, machinery control and electrical installations. As part of the established Finder 60 Series general purpose relays, it provides a practical solution for controlling multiple electrical circuits in industrial control panels and automated equipment.

Featuring a 125 V DC operating coil and three independent changeover contacts rated at 10 A, this relay enables multiple electrical circuits to be switched simultaneously using a single control signal. Its electromechanical design provides galvanic isolation between the control coil and the switched contact circuits, making it suitable for a wide range of industrial control applications.

The Finder 60.13.9.125.2000 features an 11-pin plug-in connection designed for installation using compatible Finder 90 Series relay sockets. Its compact construction and non-latching operation make it suitable for control cabinets, industrial machinery and electrical systems that require reliable switching from a 125 V DC control supply.

Key Advantages

Reliable 3-pole industrial power relay for automation and electrical control.
Three changeover contacts (3PDT) enable simultaneous switching of multiple circuits.
10 A rated contact current suitable for a range of industrial electrical loads.
125 V DC operating coil for appropriately rated DC control systems.
250 V AC rated contact voltage for general purpose switching applications.
Galvanic isolation between the control coil and switched contact circuits.
Plug-in construction simplifies installation, maintenance and relay replacement.
Compatible with suitable Finder 90 Series relay sockets.
Non-latching operation automatically returns contacts to their normal positions when the coil is de-energised.
Suitable for industrial automation, control panels and auxiliary switching circuits.

Key Features

Finder 60 Series general purpose industrial relay.
3 CO (3PDT) contact configuration with three independent changeover contacts.
10 A nominal contact current.
125 V DC nominal coil voltage.
250 V AC rated contact voltage.
400 V AC maximum switching voltage.
Electromagnetic, monostable switching mechanism.
11-pin plug-in terminal arrangement.
Three electrically independent changeover contact sets.
Compatible with suitable Finder 90 Series relay sockets.
DC coil operation for industrial control circuits.
Compact industrial construction for electrical control cabinets.
Suitable for auxiliary switching, signalling and automation applications.

Reliable DC-Controlled Switching for Industrial Automation

Electromechanical relays such as the Finder 60.13.9.125.2000 operate by energising an electromagnetic coil to change the position of mechanically linked electrical contacts. When the 125 V DC coil is energised, the relay switches its three changeover contacts between their normally closed and normally open positions, enabling multiple electrical circuits to be controlled simultaneously.

The Finder 60 Series is designed for general purpose industrial switching applications where dependable contact operation, electrical isolation and straightforward maintenance are important. The three-pole configuration is particularly useful for auxiliary control circuits, automation interfaces, signalling systems and installations requiring several switching functions from one control signal.

The relay's 10 A contact rating and convenient 11-pin plug-in arrangement make it suitable for industrial control panels, machinery and electrical installations. Installation using a compatible Finder 90 Series socket allows convenient relay replacement without disconnecting permanent socket wiring, helping simplify maintenance and minimise equipment downtime.

Typical Applications

Industrial automation and machinery control systems.
Electrical control panels and distribution assemblies.
125 V DC auxiliary control and signalling circuits.
PLC interface and auxiliary switching applications.
Motor starter and contactor control circuits.
Conveyor and material handling machinery.
Electrical interlocking and indication systems.
Industrial process control equipment.
Power distribution and electrical monitoring systems.
Building automation and facilities control systems.
Manufacturing equipment and OEM automation machinery.
Multi-circuit electrical switching installations.

Technical Specifications

Tick the specs you need, then view products that match.

Device Type	Plug-in Relay
Terminal Type	PCB / pins
Load Voltage	400 V AC
Mounting Type	Plug-in socket
Switching Current (A)	10 A
Manufacturer	Finder
Series	60 Series General Purpose Relays
Model	60.13.9.125.2000
Product type	Industrial electromechanical power relay
Contact configuration	3 CO (3PDT), three changeover contacts
Number of poles	3
Rated contact current	10 A
Rated contact voltage	250 V AC
Maximum switching voltage	400 V AC
Rated resistive load (AC-1)	2,500 VA
Nominal coil voltage	125 V DC
Coil supply type	Direct current (DC)
Coil operation	Non-latching, monostable
Contact arrangement	Three independent changeover contacts
Switching mechanism	Electromagnetic
Terminal type	11-pin plug-in
Mounting type	Plug-in socket mounting
Compatible socket series	Finder 90 Series
Mechanical life	Up to 20 million operations under specified conditions
Environmental protection category	RT I

Frequently Asked Questions

What is the Finder 60.13.9.125.2000 used for?

The Finder 60.13.9.125.2000 is an industrial electromechanical relay designed for switching electrical circuits in automation systems, machinery control panels and industrial installations. Its three changeover contacts allow multiple circuits to be controlled using a single relay.

What coil voltage does the Finder 60.13.9.125.2000 require?

The relay uses a 125 V DC coil. It is intended for control systems that provide an appropriately rated direct-current supply and should not be connected directly to an AC coil supply.

What is the contact rating of the Finder 60.13.9.125.2000?

The relay features three changeover contacts rated at 10 A, with a rated contact voltage of 250 V AC. Actual switching capacity depends on the electrical load, voltage and operating conditions, particularly when switching DC loads.

What does the 3PDT contact configuration mean?

3PDT stands for three-pole double-throw. The Finder 60.13.9.125.2000 contains three independent changeover contact sets, each providing a common, normally open and normally closed connection. All three contact sets change state when the relay coil is energised.

Can the Finder 60.13.9.125.2000 switch AC and DC loads?

The relay's electromechanical contacts can be used for appropriately rated AC and DC switching applications. The 125 V DC designation refers to the coil supply, not the voltage of the load being switched. Contact ratings and permissible switching capacity must be checked for the specific load.

How is the Finder 60.13.9.125.2000 installed?

The relay features an 11-pin plug-in connection and is designed for installation using compatible Finder 90 Series relay sockets. This arrangement allows convenient installation and replacement in electrical control panels and industrial automation equipment.

Trusted by Industrial Automation Professionals Worldwide

Finder 60 Series general purpose relays provide dependable electromechanical switching for industrial automation, machinery control and electrical installations. With its three changeover contacts, 10 A contact rating, 125 V DC coil and convenient plug-in construction, the Finder 60.13.9.125.2000 offers a practical solution for industrial control systems requiring reliable DC-operated relay switching.

Device Type	Plug-in Relay
Terminal Type	PCB / pins
Load Voltage	400 V AC
Mounting Type	Plug-in socket
Switching Current (A)	10 A
Manufacturer	Finder
Series	60 Series General Purpose Relays
Model	60.13.9.125.2000
Product type	Industrial electromechanical power relay
Contact configuration	3 CO (3PDT), three changeover contacts
Number of poles	3
Rated contact current	10 A
Rated contact voltage	250 V AC
Maximum switching voltage	400 V AC
Rated resistive load (AC-1)	2,500 VA
Nominal coil voltage	125 V DC
Coil supply type	Direct current (DC)
Coil operation	Non-latching, monostable
Contact arrangement	Three independent changeover contacts
Switching mechanism	Electromagnetic
Terminal type	11-pin plug-in
Mounting type	Plug-in socket mounting
Compatible socket series	Finder 90 Series
Mechanical life	Up to 20 million operations under specified conditions
Environmental protection category	RT I

UK delivery

Delivery options

Free UK delivery on orders over £200 ex VAT. Order in-stock items before 2pm Monday to Friday for next-day delivery.

This product Manufacturer Lead Time

Standard Manufacturer Lead Time 6-8 Weeks, Call For Express Delivery Options

Standard delivery

£8 ex VAT · free over £200

UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.

Heavier items may be charged at a weight-based or pallet rate, shown at checkout.

Collect from our showroom

Mon–Fri, 8am–5pm

Order and pay online, then collect from our showroom.

Please allow 15–30 minutes after ordering for us to prepare your order.

Northern Ireland, ROI & export

Priced at checkout

We deliver to Northern Ireland, the Republic of Ireland and overseas.

Delivery is calculated at checkout based on your destination.

Orders with mixed availability

Shipped complete

If part of your order is on a lead time, we hold it and send everything together.

Need the in-stock items sooner? Ask us and we can split the delivery.

Business customer returns

Returns & order support

Need to return an item? Find the guidance for your order below, then contact our team before sending anything back.

Stocked items

Request within 30 days

Changed your mind or ordered the wrong item? Request a return within 30 days of receipt. There is no restocking charge.

Items must be unused, in resalable condition and in their original packaging, and returns need our approval first. Return carriage is at your cost, and the original delivery charge is not refunded.

Faulty or damaged items

Tell us as soon as possible

Faulty, damaged on delivery or the wrong product supplied? Contact our team as soon as possible with the details.

We will review the issue and arrange an appropriate resolution under our terms and conditions and your statutory rights.

Made-to-order items

Manufacturer approval needed

Manufactured, configured and special-order products can only be returned with the manufacturer’s approval. Any handling charge is agreed with you when you request the return.

This does not affect claims for faulty goods or items that do not meet the agreed specification.

LED Controls showroom with electrical products on display

Let’s get your return sorted.

Send your order number, product details and reason for return. For faults or delivery damage, include photographs if available. We will confirm the next steps.

Email returns team 01706 242050

The 30-day return request period applies to change-of-mind returns for stocked items. It does not limit your statutory rights for faulty or non-conforming goods.