60.13.9.060.2040 Finder General purpose relay 3 pole 10A DC 60V

Q: What is the Finder 60.13.9.060.2040 used for?

The Finder 60.13.9.060.2040 is a general purpose electromechanical relay designed for switching electrical circuits in industrial automation, machinery, electrical control panels and distribution equipment. Its three changeover contacts allow multiple independent circuits to be controlled using a single coil signal.

Q: What coil voltage does the Finder 60.13.9.060.2040 require?

The relay operates using a 60 V DC nominal coil. The Finder 60 Series DC coil operating range is 80–110% of nominal voltage, corresponding to approximately 48–66 V DC for this version.

Q: What is the contact rating of this Finder relay?

The relay features three changeover contacts rated at 10 A, with a rated contact voltage of 250 V AC and a maximum switching voltage of 400 V AC. Its rated AC1 switching capacity is 2,500 VA, subject to the applicable load category and operating conditions.

Q: Does the Finder 60.13.9.060.2040 have a test button and mechanical indicator?

Yes. The relay includes a lockable manual test button and mechanical flag indicator. The test button allows the contacts to be operated manually during inspection or commissioning, while the mechanical indicator provides visual feedback of the relay's operating state. The locking function must be used only in accordance with the manufacturer's instructions and applicable safety procedures.

Q: How is the Finder 60.13.9.060.2040 installed?

The relay features an 11-pin plug-in connection designed for use with compatible Finder 90 Series relay sockets. The socket can be mounted within an electrical control panel, allowing the relay to be installed, inspected or replaced conveniently without disturbing the socket wiring.

60.13.9.060.2040 Finder General purpose relay 3 pole 10A DC 60V.

SKU: 60.13.9.060.2040Alt SKU: 601390602040MPN: 60.13.9.060.2040

Why Choose the Finder 60.13.9.060.2040 General Purpose Relay?

The Finder 60.13.9.060.2040 is a robust and versatile 10 A general purpose electromechanical relay featuring a 60 V DC coil, three changeover contacts (3PDT) and a lockable test button with mechanical status indicator. As part of the established Finder 60 Series, this industrial plug-in relay is designed for dependable electrical switching in automation systems, machinery, control panels and electrical distribution equipment.

The relay provides three independent changeover contacts (3 CO), enabling multiple electrical circuits to be switched simultaneously using a single control signal. Its silver-cadmium oxide (AgCdO) contact material is designed for reliable power switching, while the integrated lockable test button allows convenient manual operation during commissioning, inspection and maintenance. A mechanical flag indicator provides visual confirmation of the relay's operating state.

With a 60 V DC nominal coil voltage, 10 A rated contact current and 250 V AC rated contact voltage, the Finder 60.13.9.060.2040 is suitable for industrial switching and auxiliary control applications. Its 11-pin plug-in construction supports straightforward installation into compatible Finder 90 Series sockets, making it a practical solution for industrial control cabinets and machinery installations.

Key Advantages

Reliable 10 A general purpose relay for industrial automation and electrical control applications.
60 V DC operating coil suitable for compatible industrial DC control systems.
Three changeover contacts (3PDT / 3 CO) enable simultaneous switching of three independent circuits.
250 V AC rated contact voltage for a wide range of industrial electrical loads.
Silver-cadmium oxide (AgCdO) contacts provide dependable switching performance.
Lockable test button enables convenient manual contact operation during testing and commissioning.
Mechanical flag indicator provides visual indication of relay operation.
11-pin plug-in design simplifies installation, maintenance and replacement.
Compatible with Finder 90 Series relay sockets for control-panel integration.
Robust electromechanical construction supports reliable operation in demanding industrial environments.

Key Features

Finder 60 Series general purpose relay.
60 V DC nominal coil voltage.
Three changeover contacts (3PDT / 3 CO).
10 A rated contact current.
20 A maximum peak contact current.
250 V AC rated contact voltage.
400 V AC maximum switching voltage.
2,500 VA rated AC1 switching capacity.
500 VA rated AC15 load at 230 V AC.
Silver-cadmium oxide (AgCdO) contact material.
1.3 W nominal DC coil consumption.
Lockable manual test button for commissioning and maintenance.
Integrated mechanical flag indicator for visual status monitoring.
11-pin plug-in connection for compatible relay sockets.
Monostable electromechanical operating mechanism.
Compact industrial construction for electrical control cabinets and automation systems.

Reliable Multi-Circuit Switching for Industrial Automation

Electromechanical relays such as the Finder 60.13.9.060.2040 provide galvanic isolation between the control coil and switched contact circuits. When the 60 V DC coil is energised, the relay's electromagnetic mechanism operates its three changeover contacts simultaneously. Each contact transfers between normally closed and normally open connections, enabling three independent electrical circuits to be controlled through a single switching signal.

The Finder 60 Series is designed for industrial installations requiring reliable switching, flexible contact arrangements and straightforward servicing. The 60.13.9.060.2040 includes a lockable test button and mechanical indicator, allowing maintenance engineers to inspect relay operation and manually test contact movement. Its plug-in design enables convenient replacement using a compatible Finder 90 Series socket, helping reduce maintenance time and simplify industrial control-panel servicing. Manual testing should only be performed under appropriate electrical safety procedures.

Typical Applications

Industrial automation and PLC interface circuits.
Electrical control panels and switchgear assemblies.
Machine control and manufacturing equipment.
Motor control auxiliary circuits and electrical interlocking.
Industrial signalling, alarms and indication systems.
Conveyor and material handling control equipment.
Hoists, cranes and industrial lifting equipment control circuits.
Industrial heating, burner and boiler control systems.
Building automation and electrical distribution control.
OEM machinery and industrial electrical system integration.

Technical Specifications

Tick the specs you need, then view products that match.

Device Type	Plug-in Relay
Mounting Type	Plug-in socket
Switching Current (A)	10 A
Load Voltage	400 V AC
Manufacturer	Finder
Series	60 Series General Purpose Relays
Model	60.13.9.060.2040
Product type	Electromechanical general purpose relay
Relay configuration	3-pole changeover (3PDT / 3 CO)
Number of contacts	3 changeover contacts
Nominal coil voltage	60 V DC
Coil type	DC
Operating principle	Monostable
Nominal coil consumption	1.3 W
DC coil operating voltage range	48–66 V DC
Rated contact current	10 A
Maximum peak contact current	20 A
Rated contact voltage	250 V AC
Maximum switching voltage	400 V AC
Rated load AC1	2,500 VA
Rated load AC15	500 VA at 230 V AC
Single-phase motor rating	0.37 kW at 230 V AC
Contact material	Silver-cadmium oxide (AgCdO)
Mechanical endurance	50 million operations (DC coil version)
Typical operate time	11 ms
Typical release time	4 ms
Coil-to-contact impulse withstand voltage	3.6 kV (1.2/50 µs)
Dielectric strength between open contacts	1,000 V AC
Operating ambient temperature	−40 to +70 °C
Environmental protection category	RT I
Mounting type	Plug-in / socket mounting
Terminal arrangement	11-pin plug-in
Compatible socket series	Finder 90 Series
Manual test function	Lockable test button
Mechanical indicator	Yes
Contact material option	AgCdO (code 2)

Frequently Asked Questions

What is the Finder 60.13.9.060.2040 used for?

The Finder 60.13.9.060.2040 is a general purpose electromechanical relay designed for switching electrical circuits in industrial automation, machinery, electrical control panels and distribution equipment. Its three changeover contacts allow multiple independent circuits to be controlled using a single coil signal.

What coil voltage does the Finder 60.13.9.060.2040 require?

The relay operates using a 60 V DC nominal coil. The Finder 60 Series DC coil operating range is 80–110% of nominal voltage, corresponding to approximately 48–66 V DC for this version.

What is the contact rating of this Finder relay?

The relay features three changeover contacts rated at 10 A, with a rated contact voltage of 250 V AC and a maximum switching voltage of 400 V AC. Its rated AC1 switching capacity is 2,500 VA, subject to the applicable load category and operating conditions.

Does the Finder 60.13.9.060.2040 have a test button and mechanical indicator?

Yes. The relay includes a lockable manual test button and mechanical flag indicator. The test button allows the contacts to be operated manually during inspection or commissioning, while the mechanical indicator provides visual feedback of the relay's operating state. The locking function must be used only in accordance with the manufacturer's instructions and applicable safety procedures.

How is the Finder 60.13.9.060.2040 installed?

The relay features an 11-pin plug-in connection designed for use with compatible Finder 90 Series relay sockets. The socket can be mounted within an electrical control panel, allowing the relay to be installed, inspected or replaced conveniently without disturbing the socket wiring.

Trusted by Industrial Automation Professionals Worldwide

Finder 60 Series general purpose relays provide dependable multi-circuit switching for industrial automation, electrical control and machine-building applications. The Finder 60.13.9.060.2040 combines a 10 A contact rating, 60 V DC coil, three changeover contacts and an integrated lockable test button with mechanical indicator, delivering a practical and serviceable solution for industrial electrical control systems.

Device Type	Plug-in Relay
Mounting Type	Plug-in socket
Switching Current (A)	10 A
Load Voltage	400 V AC
Manufacturer	Finder
Series	60 Series General Purpose Relays
Model	60.13.9.060.2040
Product type	Electromechanical general purpose relay
Relay configuration	3-pole changeover (3PDT / 3 CO)
Number of contacts	3 changeover contacts
Nominal coil voltage	60 V DC
Coil type	DC
Operating principle	Monostable
Nominal coil consumption	1.3 W
DC coil operating voltage range	48–66 V DC
Rated contact current	10 A
Maximum peak contact current	20 A
Rated contact voltage	250 V AC
Maximum switching voltage	400 V AC
Rated load AC1	2,500 VA
Rated load AC15	500 VA at 230 V AC
Single-phase motor rating	0.37 kW at 230 V AC
Contact material	Silver-cadmium oxide (AgCdO)
Mechanical endurance	50 million operations (DC coil version)
Typical operate time	11 ms
Typical release time	4 ms
Coil-to-contact impulse withstand voltage	3.6 kV (1.2/50 µs)
Dielectric strength between open contacts	1,000 V AC
Operating ambient temperature	−40 to +70 °C
Environmental protection category	RT I
Mounting type	Plug-in / socket mounting
Terminal arrangement	11-pin plug-in
Compatible socket series	Finder 90 Series
Manual test function	Lockable test button
Mechanical indicator	Yes
Contact material option	AgCdO (code 2)

UK delivery

Delivery options

Free UK delivery on orders over £200 ex VAT. Order in-stock items before 2pm Monday to Friday for next-day delivery.

This product Manufacturer Lead Time

Standard Manufacturer Lead Time 6-8 Weeks, Call For Express Delivery Options

Standard delivery

£8 ex VAT · free over £200

UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.

Heavier items may be charged at a weight-based or pallet rate, shown at checkout.

Collect from our showroom

Mon–Fri, 8am–5pm

Order and pay online, then collect from our showroom.

Please allow 15–30 minutes after ordering for us to prepare your order.

Northern Ireland, ROI & export

Priced at checkout

We deliver to Northern Ireland, the Republic of Ireland and overseas.

Delivery is calculated at checkout based on your destination.

Orders with mixed availability

Shipped complete

If part of your order is on a lead time, we hold it and send everything together.

Need the in-stock items sooner? Ask us and we can split the delivery.

Business customer returns

Returns & order support

Need to return an item? Find the guidance for your order below, then contact our team before sending anything back.

Stocked items

Request within 30 days

Changed your mind or ordered the wrong item? Request a return within 30 days of receipt. There is no restocking charge.

Items must be unused, in resalable condition and in their original packaging, and returns need our approval first. Return carriage is at your cost, and the original delivery charge is not refunded.

Faulty or damaged items

Tell us as soon as possible

Faulty, damaged on delivery or the wrong product supplied? Contact our team as soon as possible with the details.

We will review the issue and arrange an appropriate resolution under our terms and conditions and your statutory rights.

Made-to-order items

Manufacturer approval needed

Manufactured, configured and special-order products can only be returned with the manufacturer’s approval. Any handling charge is agreed with you when you request the return.

This does not affect claims for faulty goods or items that do not meet the agreed specification.

LED Controls showroom with electrical products on display

Let’s get your return sorted.

Send your order number, product details and reason for return. For faults or delivery damage, include photographs if available. We will confirm the next steps.

Email returns team 01706 242050

The 30-day return request period applies to change-of-mind returns for stocked items. It does not limit your statutory rights for faulty or non-conforming goods.