60.13.9.060.2000 Finder General purpose relay 3 pole 10A DC 60V

Q: What is the Finder 60.13.9.060.2000 used for?

The Finder 60.13.9.060.2000 is a general purpose electromechanical relay used to switch electrical circuits in industrial automation, machinery, electrical control panels and distribution equipment. Its three changeover contacts allow multiple independent circuits to be controlled using one coil signal.

Q: What coil voltage does the Finder 60.13.9.060.2000 require?

The relay operates using a 60 V DC nominal coil. The specified DC coil operating voltage range is 48–66 V DC, making it suitable for compatible 60 V DC industrial control circuits.

Q: What is the contact rating of this Finder relay?

The relay features three changeover contacts rated at 10 A, with a rated contact voltage of 250 V AC and a maximum switching voltage of 400 V AC. Its rated AC1 switching capacity is 2,500 VA, subject to the applicable load category and operating conditions.

Q: What does the 3PDT contact configuration mean?

3PDT (three-pole double-throw) means the relay has three independent changeover contacts. Each contact switches between normally closed and normally open connections when the coil is energised, allowing three separate electrical circuits to be switched simultaneously.

Q: How is the Finder 60.13.9.060.2000 installed?

The relay uses an 11-pin plug-in connection and is designed for installation with a compatible Finder 90 Series relay socket. The socket can be incorporated into an electrical control panel, allowing the relay to be installed or replaced conveniently during maintenance.

60.13.9.060.2000 Finder General purpose relay 3 pole 10A DC 60V.

SKU: 60.13.9.060.2000Alt SKU: 601390602000MPN: 60.13.9.060.2000

Why Choose the Finder 60.13.9.060.2000 General Purpose Relay?

The Finder 60.13.9.060.2000 is a robust and reliable 10 A general purpose electromechanical relay featuring a 60 V DC coil and three changeover contacts (3PDT). Designed for industrial automation, electrical control panels and machinery applications, this relay provides dependable switching of multiple electrical circuits using a single control signal. As part of the established Finder 60 Series, it combines reliable electrical performance with a practical plug-in design for straightforward installation and maintenance.

The relay features three changeover contacts (3 CO), allowing three independent electrical circuits to be switched simultaneously when the coil is energised. Its silver-nickel (AgNi) contact material provides dependable switching performance, while the monostable operating mechanism ensures that the contacts return to their normal positions when coil power is removed. The relay's standard contact arrangement is suitable for a wide range of industrial control and switching duties.

With a 60 V DC nominal coil voltage, 10 A rated contact current and 250 V AC rated switching voltage, the Finder 60.13.9.060.2000 is well suited to industrial control systems, electrical distribution equipment and machine automation. Its 11-pin plug-in construction allows installation into compatible Finder 90 Series relay sockets, supporting convenient maintenance and replacement within control cabinets.

Key Advantages

Reliable 10 A industrial general purpose relay for electrical switching and automation applications.
60 V DC operating coil suitable for compatible industrial DC control systems.
Three changeover contacts (3PDT / 3 CO) enable simultaneous switching of three independent circuits.
250 V AC rated contact voltage for industrial electrical loads.
Silver-nickel (AgNi) contacts provide dependable switching performance.
11-pin plug-in design simplifies installation, inspection and replacement.
Compatible with Finder 90 Series relay sockets for flexible panel mounting.
Monostable operation automatically returns contacts to their normal state when the coil is de-energised.
Compact construction supports efficient use of space inside electrical control cabinets.
Suitable for industrial automation, machine control, electrical distribution and auxiliary switching circuits.

Key Features

Finder 60 Series general purpose relay.
60 V DC nominal coil voltage.
Three changeover contacts (3PDT / 3 CO).
10 A rated contact current.
20 A maximum peak contact current.
250 V AC rated contact voltage.
400 V AC maximum switching voltage.
2,500 VA rated AC1 switching capacity.
500 VA rated AC15 load at 230 V AC.
Silver-nickel (AgNi) contact material.
1.3 W nominal DC coil consumption.
11-pin plug-in connection for compatible relay sockets.
Monostable electromechanical switching mechanism.
Cadmium-free standard contact construction.
Suitable for use with compatible Finder 90 Series sockets and accessories.

Reliable Multi-Circuit Switching for Industrial Automation

Electromechanical relays such as the Finder 60.13.9.060.2000 provide electrical isolation between control circuits and switched loads. When the 60 V DC coil is energised, an internal electromagnetic mechanism operates the relay's three changeover contacts simultaneously. Each contact transfers between its normally closed and normally open positions, enabling connected electrical circuits to be controlled from a single input signal.

The Finder 60 Series is designed for industrial switching applications requiring dependable operation, multiple contact configurations and straightforward maintenance. The 60.13 model's three-pole arrangement is particularly useful in control panels where several auxiliary circuits, signalling devices or electrical loads must operate together. Its plug-in construction also allows the relay to be removed and replaced without disturbing the socket wiring, helping reduce maintenance time and simplify servicing.

Typical Applications

Industrial automation and PLC-controlled switching circuits.
Electrical control panels and distribution equipment.
Machine control and manufacturing automation systems.
Motor control auxiliary circuits and electrical interlocking.
Industrial signalling, alarm and indication systems.
Conveyor and material handling control equipment.
Hoists, cranes and industrial lifting equipment control circuits.
Burners, boilers and industrial heating control systems.
Building services and lighting control installations.
OEM machinery and industrial electrical system integration.

Technical Specifications

Tick the specs you need, then view products that match.

Device Type	Plug-in Relay
Mounting Type	Plug-in socket
Load Voltage	400 V AC
Switching Current (A)	10 A
Manufacturer	Finder
Series	60 Series General Purpose Relays
Model	60.13.9.060.2000
Product type	Electromechanical general purpose relay
Relay configuration	3-pole changeover (3PDT / 3 CO)
Number of contacts	3 changeover contacts
Nominal coil voltage	60 V DC
Coil type	DC
Operating principle	Monostable
Nominal coil consumption	1.3 W
Coil resistance	2,760 Ω
Rated coil current	21.7 mA
DC coil operating voltage range	48–66 V DC
Rated contact current	10 A
Maximum peak contact current	20 A
Rated contact voltage	250 V AC
Maximum switching voltage	400 V AC
Rated load AC1	2,500 VA
Rated load AC15	500 VA at 230 V AC
Single-phase motor rating	0.37 kW at 230 V AC
Contact material	Silver nickel (AgNi)
Minimum switching load	500 mW (10 V / 5 mA)
Mechanical endurance	50 million operations (DC coil version)
Electrical endurance	200,000 operations at rated AC1 load
Typical operate time	11 ms
Typical release time	4 ms
Coil-to-contact impulse withstand voltage	3.6 kV (1.2/50 µs)
Dielectric strength between open contacts	1,000 V AC
Operating ambient temperature	−40 to +70 °C
Environmental protection category	RT I
Mounting type	Plug-in / socket mounting
Terminal arrangement	11-pin plug-in
Compatible socket series	Finder 90 Series
Dimensions (H × W × D)	54.2 × 32.5 × 36.4 mm
Approximate weight	80 g

Frequently Asked Questions

What is the Finder 60.13.9.060.2000 used for?

The Finder 60.13.9.060.2000 is a general purpose electromechanical relay used to switch electrical circuits in industrial automation, machinery, electrical control panels and distribution equipment. Its three changeover contacts allow multiple independent circuits to be controlled using one coil signal.

What coil voltage does the Finder 60.13.9.060.2000 require?

The relay operates using a 60 V DC nominal coil. The specified DC coil operating voltage range is 48–66 V DC, making it suitable for compatible 60 V DC industrial control circuits.

What is the contact rating of this Finder relay?

The relay features three changeover contacts rated at 10 A, with a rated contact voltage of 250 V AC and a maximum switching voltage of 400 V AC. Its rated AC1 switching capacity is 2,500 VA, subject to the applicable load category and operating conditions.

What does the 3PDT contact configuration mean?

3PDT (three-pole double-throw) means the relay has three independent changeover contacts. Each contact switches between normally closed and normally open connections when the coil is energised, allowing three separate electrical circuits to be switched simultaneously.

How is the Finder 60.13.9.060.2000 installed?

The relay uses an 11-pin plug-in connection and is designed for installation with a compatible Finder 90 Series relay socket. The socket can be incorporated into an electrical control panel, allowing the relay to be installed or replaced conveniently during maintenance.

Trusted by Industrial Automation Professionals Worldwide

Finder 60 Series general purpose relays are widely used in industrial automation, electrical control and machine-building applications where reliable multi-circuit switching is essential. The Finder 60.13.9.060.2000 combines a robust 10 A contact rating, a 60 V DC operating coil and convenient 11-pin plug-in installation to provide a dependable solution for industrial electrical control systems.

Device Type	Plug-in Relay
Mounting Type	Plug-in socket
Load Voltage	400 V AC
Switching Current (A)	10 A
Manufacturer	Finder
Series	60 Series General Purpose Relays
Model	60.13.9.060.2000
Product type	Electromechanical general purpose relay
Relay configuration	3-pole changeover (3PDT / 3 CO)
Number of contacts	3 changeover contacts
Nominal coil voltage	60 V DC
Coil type	DC
Operating principle	Monostable
Nominal coil consumption	1.3 W
Coil resistance	2,760 Ω
Rated coil current	21.7 mA
DC coil operating voltage range	48–66 V DC
Rated contact current	10 A
Maximum peak contact current	20 A
Rated contact voltage	250 V AC
Maximum switching voltage	400 V AC
Rated load AC1	2,500 VA
Rated load AC15	500 VA at 230 V AC
Single-phase motor rating	0.37 kW at 230 V AC
Contact material	Silver nickel (AgNi)
Minimum switching load	500 mW (10 V / 5 mA)
Mechanical endurance	50 million operations (DC coil version)
Electrical endurance	200,000 operations at rated AC1 load
Typical operate time	11 ms
Typical release time	4 ms
Coil-to-contact impulse withstand voltage	3.6 kV (1.2/50 µs)
Dielectric strength between open contacts	1,000 V AC
Operating ambient temperature	−40 to +70 °C
Environmental protection category	RT I
Mounting type	Plug-in / socket mounting
Terminal arrangement	11-pin plug-in
Compatible socket series	Finder 90 Series
Dimensions (H × W × D)	54.2 × 32.5 × 36.4 mm
Approximate weight	80 g

UK delivery

Delivery options

Free UK delivery on orders over £200 ex VAT. Order in-stock items before 2pm Monday to Friday for next-day delivery.

This product Manufacturer Lead Time

Standard Manufacturer Lead Time 6-8 Weeks, Call For Express Delivery Options

Standard delivery

£8 ex VAT · free over £200

UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.

Heavier items may be charged at a weight-based or pallet rate, shown at checkout.

Collect from our showroom

Mon–Fri, 8am–5pm

Order and pay online, then collect from our showroom.

Please allow 15–30 minutes after ordering for us to prepare your order.

Northern Ireland, ROI & export

Priced at checkout

We deliver to Northern Ireland, the Republic of Ireland and overseas.

Delivery is calculated at checkout based on your destination.

Orders with mixed availability

Shipped complete

If part of your order is on a lead time, we hold it and send everything together.

Need the in-stock items sooner? Ask us and we can split the delivery.

Business customer returns

Returns & order support

Need to return an item? Find the guidance for your order below, then contact our team before sending anything back.

Stocked items

Request within 30 days

Changed your mind or ordered the wrong item? Request a return within 30 days of receipt. There is no restocking charge.

Items must be unused, in resalable condition and in their original packaging, and returns need our approval first. Return carriage is at your cost, and the original delivery charge is not refunded.

Faulty or damaged items

Tell us as soon as possible

Faulty, damaged on delivery or the wrong product supplied? Contact our team as soon as possible with the details.

We will review the issue and arrange an appropriate resolution under our terms and conditions and your statutory rights.

Made-to-order items

Manufacturer approval needed

Manufactured, configured and special-order products can only be returned with the manufacturer’s approval. Any handling charge is agreed with you when you request the return.

This does not affect claims for faulty goods or items that do not meet the agreed specification.

LED Controls showroom with electrical products on display

Let’s get your return sorted.

Send your order number, product details and reason for return. For faults or delivery damage, include photographs if available. We will confirm the next steps.

Email returns team 01706 242050

The 30-day return request period applies to change-of-mind returns for stocked items. It does not limit your statutory rights for faulty or non-conforming goods.