Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
60.13.8.230.2000 Finder General purpose relay 3 pole 10A 230V
60.13.8.230.2000 Finder General purpose relay 3 pole 10A 230V.
This product has been discontinued
A direct replacement is available below.
Replacement product
60.13.8.230.0000 Finder General purpose relay 3 pole 10A 230V
SKU: 60.13.8.230.0000
£12.32 ex VAT
View
Why Choose the Finder 60.13.8.230.2000 Industrial Power Relay?
The Finder 60.13.8.230.2000 is a reliable 3-pole changeover (3PDT) industrial electromechanical relay designed for dependable electrical switching in industrial automation, machinery control and electrical installations. As part of the established Finder 60 Series general purpose relays, it provides a practical solution for controlling multiple electrical circuits in industrial control panels, automated equipment and electrical distribution systems.
Featuring a 230 V AC operating coil and three independent changeover contacts rated at 10 A, this relay enables simultaneous switching of multiple circuits using a single control signal. Its robust electromechanical construction provides dependable switching performance, while the silver cadmium oxide (AgCdO) contact material is suitable for a range of industrial electrical loads.
The Finder 60.13.8.230.2000 features an 11-pin plug-in connection designed for installation using compatible Finder 90 Series relay sockets. Its compact construction, non-latching operation and replaceable plug-in design make it suitable for electrical control cabinets, industrial machinery, building automation and general purpose switching applications.
Key Advantages
- Reliable 3-pole industrial power relay for electrical control and automation.
- Three changeover contacts (3PDT) enable simultaneous switching of multiple circuits.
- 10 A rated contact current suitable for a wide range of industrial switching applications.
- 230 V AC operating coil compatible with suitable mains-voltage control circuits.
- 250 V AC rated contact voltage for common industrial electrical loads.
- Silver cadmium oxide (AgCdO) contacts provide dependable electromechanical switching.
- Electrical isolation between the control coil and switched contact circuits.
- Plug-in construction simplifies installation, maintenance and replacement.
- Compatible with suitable Finder 90 Series sockets for control panel integration.
- Non-latching operation automatically returns contacts to their normal positions when the coil is de-energised.
Key Features
- Finder 60 Series general purpose industrial relay.
- 3 CO (3PDT) contact configuration with three independent changeover contacts.
- 10 A nominal contact current.
- 230 V AC nominal coil voltage.
- 50/60 Hz AC coil operation.
- 250 V AC rated contact voltage.
- 400 V AC maximum switching voltage.
- AgCdO contact material for industrial electrical switching.
- Electromagnetic, monostable switching mechanism.
- 11-pin plug-in terminal arrangement.
- Compatible with suitable Finder 90 Series relay sockets.
- Three electrically independent changeover contact sets.
- Compact industrial construction for electrical control cabinets.
- Suitable for auxiliary switching, control circuits and industrial automation equipment.
Reliable Multi-Circuit Switching for Industrial Automation
Electromechanical relays such as the Finder 60.13.8.230.2000 operate by energising an electromagnetic coil to change the position of mechanically linked electrical contacts. When the 230 V AC coil is energised, the relay switches its three changeover contacts between their normally closed and normally open positions, enabling three independent electrical circuits to be controlled simultaneously.
The Finder 60 Series is designed for general purpose industrial switching applications where dependable contact operation, electrical isolation and straightforward maintenance are important. Its three-pole configuration is particularly useful for switching auxiliary circuits, interfacing automation equipment and controlling multiple electrical functions from a single control signal.
With a 10 A contact rating, robust electromechanical construction and convenient 11-pin plug-in arrangement, the 60.13.8.230.2000 is suitable for industrial control panels, electrical distribution systems and automated machinery. Installation using a compatible Finder 90 Series socket enables convenient relay replacement without disconnecting permanent socket wiring, helping simplify maintenance and minimise equipment downtime.
Typical Applications
- Industrial automation and machinery control systems.
- Electrical control panels and distribution assemblies.
- PLC interface and auxiliary switching circuits.
- Motor starter and contactor control systems.
- Conveyor and material handling machinery.
- Hoists, cranes and industrial lifting equipment.
- Burner, boiler and industrial heating control systems.
- Building automation and electrical management systems.
- Industrial signalling and electrical interlocking circuits.
- Road and tunnel lighting control systems.
- Manufacturing equipment and OEM automation machinery.
- Multi-circuit electrical switching and control installations.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Plug-in Relay | |
|---|---|---|
| Terminal Type | PCB / pins | |
| Load Voltage | 400 V AC | |
| Mounting Type | Plug-in socket | |
| Switching Current (A) | 10 A | |
| Manufacturer | Finder | |
| Series | 60 Series General Purpose Relays | |
| Model | 60.13.8.230.2000 | |
| Product type | Industrial electromechanical power relay | |
| Contact configuration | 3 CO (3PDT), three changeover contacts | |
| Number of poles | 3 | |
| Rated contact current | 10 A | |
| Maximum peak contact current | 20 A | |
| Rated contact voltage | 250 V AC | |
| Maximum switching voltage | 400 V AC | |
| Rated resistive load (AC-1) | 2,500 VA | |
| Rated inductive load (AC-15 at 230 V AC) | 500 VA | |
| Single-phase motor rating (230 V AC) | 0.37 kW | |
| Nominal coil voltage | 230 V AC | |
| Coil frequency | 50/60 Hz | |
| Coil type | AC, non-latching | |
| Rated coil consumption | 2.2 VA at 50 Hz | |
| Coil operating voltage range | 184–253 V AC | |
| Coil resistance | approximately 7.25 kΩ | |
| Contact material | Silver cadmium oxide (AgCdO) | |
| Switching mechanism | Electromagnetic, monostable | |
| Terminal type | 11-pin plug-in | |
| Mounting type | Plug-in socket mounting | |
| Compatible socket series | Finder 90 Series | |
| Mechanical life (AC coil) | 20 million operations | |
| Electrical life at rated AC-1 load | 200,000 operations | |
| Operating time | approximately 11 ms | |
| Release time | approximately 4 ms | |
| Operating temperature | −40 to +70 °C | |
| Dielectric strength between open contacts | 1,000 V AC | |
| Dimensions (H × W × D) | approximately 54.2 × 32.5 × 36.4 mm |
Frequently Asked Questions
What is the Finder 60.13.8.230.2000 used for?
The Finder 60.13.8.230.2000 is an industrial electromechanical relay designed for switching electrical circuits in automation systems, machinery control panels and industrial electrical installations. Its three changeover contacts allow multiple circuits to be controlled using a single relay.
What coil voltage does the Finder 60.13.8.230.2000 require?
The relay operates using a 230 V AC coil at 50/60 Hz. Its specified coil operating voltage range is 184–253 V AC, making it suitable for appropriately rated AC control circuits.
What is the contact rating of the Finder 60.13.8.230.2000?
The relay features three changeover contacts rated at 10 A, with a rated contact voltage of 250 V AC and a maximum switching voltage of 400 V AC. The permissible switching current depends on the load category and operating conditions.
What does the 3PDT contact configuration mean?
3PDT stands for three-pole double-throw. The Finder 60.13.8.230.2000 contains three independent changeover contact sets, each providing a common, normally open and normally closed connection. This enables three separate circuits to be switched simultaneously when the relay coil is energised.
What contact material does this relay use?
The Finder 60.13.8.230.2000 uses silver cadmium oxide (AgCdO) contacts, a contact material used in industrial electromechanical switching applications. The material should be considered when assessing environmental requirements and selecting replacement relays.
How is the Finder 60.13.8.230.2000 installed?
The relay features an 11-pin plug-in connection and is designed for installation using compatible Finder 90 Series relay sockets. This mounting arrangement allows convenient installation and replacement in electrical control panels and industrial automation equipment.
Trusted by Industrial Automation Professionals Worldwide
Finder 60 Series general purpose relays provide dependable electrical switching for industrial automation, machinery control and electrical installations. With its three changeover contacts, 10 A switching capability, 230 V AC coil and convenient plug-in construction, the Finder 60.13.8.230.2000 offers a practical solution for professional industrial control systems.
