Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
60.12.9.024.2070 Finder General purpose relay 2pole 10A DC 24V
60.12.9.024.2070 Finder General purpose relay 2pole 10A DC 24V.
This product has been discontinued
A direct replacement is available below.
Replacement product
60.12.9.024.0070 Finder General purpose relay 2pole 10A DC 24V
SKU: 60.12.9.024.0070
View
Why Choose the Finder 60.12.9.024.2070 Industrial Relay?
The Finder 60.12.9.024.2070 is a versatile general-purpose electromechanical relay from the Finder 60 Series, designed for reliable switching in industrial automation, electrical control panels, machinery and building control applications. Its plug-in construction provides a convenient solution for control systems requiring straightforward installation, inspection and replacement.
Featuring two changeover contacts (DPDT) with a rated current of 10 A and a 24 V DC operating coil, the Finder 60.12.9.024.2070 allows two independent electrical circuits to be switched using a single control signal. This arrangement is suitable for auxiliary control, signalling, interlocking and switching of appropriately rated electrical loads.
As part of Finder's established industrial relay range, the 60.12 configuration combines electromagnetic switching with socket-mounted installation. It is suitable for electrical engineers, automation specialists and maintenance teams seeking a dependable relay for low-voltage DC control systems.
Key Advantages
- Two changeover contacts (DPDT) provide flexible control of separate electrical circuits.
- 10 A rated contact current supports a variety of general-purpose switching applications.
- 24 V DC operating coil is suitable for industrial DC control supplies.
- Plug-in construction simplifies installation and replacement during maintenance.
- Electromagnetic operation provides electrical isolation between the control coil and switching contacts.
- Two independent changeover contact sets support interlocking, signalling and auxiliary control.
- Suitable for integration with compatible PLC outputs and automation controllers.
- Compact construction helps accommodate relay switching functions within electrical control panels.
- Part of the established Finder 60 Series industrial relay family.
Key Features
- Finder 60 Series general-purpose industrial relay.
- 60.12 configuration with two changeover contacts.
- DPDT contact arrangement for dual-circuit switching.
- 10 A nominal contact current.
- 24 V DC nominal coil voltage.
- 250 V AC nominal switching voltage.
- 2500 VA rated resistive switching capacity.
- Electromagnetic, monostable operating mechanism.
- Two electrically separate changeover contact sets.
- Plug-in connection arrangement for compatible relay sockets.
- Suitable for industrial control, automation and signalling applications.
Reliable Switching for Industrial Automation and Electrical Control
The Finder 60.12.9.024.2070 provides an effective interface between a 24 V DC control circuit and electrical circuits requiring changeover switching. When the relay coil is energised, its electromagnetic mechanism transfers the two changeover contacts from their normal positions, allowing connected equipment to respond to the control signal.
The two-pole changeover arrangement is useful in automation systems where one control command must operate two separate circuits. Applications can include control sequencing, auxiliary contact functions, alarm signalling and electrical interlocking. The relay can also provide an interface between compatible electronic control outputs and electrical loads, provided the output and load ratings are correctly matched.
For machinery builders and maintenance engineers, the plug-in design helps simplify relay replacement and control panel servicing. Appropriate socket selection, coil suppression, electrical protection and load assessment remain important considerations when incorporating the relay into a control system.
Typical Applications
- Industrial electrical control panels and automation cabinets.
- PLC interface and auxiliary switching circuits.
- 24 V DC machinery control systems.
- Electrical interlocking and control sequencing.
- Industrial alarm, indication and signalling circuits.
- Contactor and motor starter auxiliary control.
- Pump and fan control systems.
- Heating, ventilation and air conditioning (HVAC) controls.
- Building management and electrical automation systems.
- Manufacturing machinery and production equipment.
- OEM electrical panel manufacturing.
- Maintenance and replacement of compatible industrial relays.
Technical Specifications
Tick the specs you need, then view products that match.
| Device Type | Plug-in Relay | |
|---|---|---|
| Switching Current (A) | 10 A | |
| Manufacturer | Finder | |
| Series | 60 Series | |
| Manufacturer part number | 60.12.9.024.2070 | |
| Product type | General-purpose electromechanical relay | |
| Contact configuration | DPDT (double-pole double-throw) | |
| Number of contacts | 2 changeover (CO) | |
| Rated contact current | 10 A | |
| Nominal switching voltage | 250 V AC | |
| Rated resistive switching capacity (AC-1) | 2500 VA | |
| Nominal coil voltage | 24 V DC | |
| Coil supply type | DC | |
| Operating principle | Electromagnetic, monostable | |
| Connection type | Plug-in terminals | |
| Mounting arrangement | Compatible relay socket |
Frequently Asked Questions
What is the Finder 60.12.9.024.2070 used for?
The Finder 60.12.9.024.2070 is a general-purpose industrial electromechanical relay used for switching electrical control and auxiliary load circuits in machinery, automation systems and electrical panels. Its two changeover contacts allow separate circuits to be controlled using one coil signal.
What coil voltage does the Finder 60.12.9.024.2070 require?
The relay has a nominal operating coil voltage of 24 V DC. It is intended for direct-current control supplies and should not be substituted for a 24 V AC coil relay without checking the circuit requirements.
How many contacts does the Finder 60.12.9.024.2070 have?
The relay features two changeover contacts (DPDT), each with normally open and normally closed switching paths. Its nominal contact current rating is 10 A, subject to the electrical load and applicable switching conditions.
Can the Finder 60.12.9.024.2070 be controlled by a PLC?
Yes. The 24 V DC coil makes the relay suitable for use with compatible PLC and automation controller outputs. The control output must be capable of supplying the required coil current, and appropriate suppression should be considered for the inductive coil load.
How is the Finder 60.12.9.024.2070 installed?
The relay uses a plug-in connection arrangement intended for a compatible relay socket. The socket must be selected for the Finder 60.12 contact configuration and the electrical requirements of the installation, allowing convenient relay installation and replacement.
Trusted by Industrial Automation and Control Engineers Worldwide
Finder 60 Series relays provide practical electromechanical switching solutions for industrial control, machinery and building automation. The Finder 60.12.9.024.2070 combines a 24 V DC operating coil, two 10 A changeover contacts and plug-in installation to support reliable auxiliary switching, signalling and electrical control applications.
